ReviewsPower Line Filter

SHONCO in-line DSL Filter RJ11 6P4C Male to 2 Female Telephone Modem ADSL Splitter Filter-2 Pack

  • A DSL filter or microfilter is an analog low-pass filter installed between analog devices (such as telephones or analog modems) and a plain old....
  • The DSL filter prevents interference between such devices and a digital subscriber line (DSL) service connected to the same line. Without DSL filters,....
  • RJ11 6P4C Male to 2 Female Telephone Modem ADSL Splitter Filter. A DSL splitter is just a regular phone splitter with a filter on one of the outputs.....
  • Case Size : 4.5*3*2(cm) Cable Length :6(cm) Power supply voltage is AC220V. This device not accept full size Ethernet connector..
  • Installation :Typical installation for an existing home involves installing DSL filters on every telephone, fax machine, voice band modem, and other....
Check Stock

Aexit AC 115/250V Signal Filters 10A CW1B-10A-T Noise Suppressor Power Electromagnetic Interference Filters EMI Filter

  • Installing Hole Size(Approx) : Distance: 5.5cm / 2.2"Diameter: 5mm/0.2".
  • Size(Approx) : 5 x 4.5 x 1.8cm / 2" x 1.8" x 0.7"(L* W*H).
  • Package Content : 1 x AC Power Line EMI Filter.
Check Stock

Aexit AC 115/250V Signal Filters 15A CW1B-15A-T Noise Suppressor Power Electromagnetic Interference Filters EMI Filter

  • Installing Hole Size(Approx) : Distance: 4cm / 1.6"Diameter: 3mm/0.12".
  • Size(Approx) : 6.4 x 4.5 x 2.2cm / 2.5" x 1.8" x 0.87"(L* W*H).
  • Package Content : 1 x AC Power Line EMI Filter.
Check Stock

HLin AC 115/250V 20A CW4L2-20A-S Noise Suppressor Power EMI Filter AC Power Line EMI Filter

  • Installing Hole Size(Approx.) : Distance: 7. 5cm / 3"Diameter: 5mm/0. 2".
  • Size(Approx.) : 6 x 5. 5 x 3cm / 2. 4" x 2. 2" x 1. 2"(L* W*H).
  • Package Content : 1 x AC Power Line EMI Filter.
Check Stock

Aexit AC 115/250V Signal Filters 20A CW4L2-20A-T Noise Suppressor Power Electromagnetic Interference Filters EMI Filter

  • Installing Hole Size(Approx) : Distance: 7.5cm / 3"Diameter: 3mm/0.12".
  • Size(Approx) : 9 x 5.2 x 3cm / 3.6" x 2.1" x 1.2"(L* W*H).
  • Package Content : 1 x AC Power Line EMI Filter.
Check Stock

FBP Saw 725MHz Band Pass Filter 45MHz Bandwidth 1dB Bandwidth 703-748MHz SMA Interface Bandpass FBP-725s bandpass Band Pass Filter

  • Installing Hole Size(Approx) : Distance: 5.5cm / 2.2"Diameter: 5mm/0.2".
  • Size(Approx) : 5 x 4.5 x 1.8cm / 2" x 1.8" x 0.7"(L* W*H).
  • Package Content : 1 x AC Power Line EMI Filter.
Check Stock

Aexit CW4L2-10A-T Power Signal Filters Single Phase Noise Line EMI Filter AC Electromagnetic Interference Filters 115/250V 10A

  • Installing Hole Size(Approx) : Distance: 7.5cm/3"Diameter: 5mm/0.2".
  • Size(Approx) : 9 x 5 x 3cm/3.6" x 2" x 1.2"(L* W*H).
  • Package Content : 1 x AC Power Line EMI Filter.
Check Stock

Stetzerizer Filter - Power Line Em Filter (4)

  • Reduce Undersirable Power Line EM Radiation Levels.
Check Stock

Monoprice 602520 Microphone Stand with Boom

  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer....
Check Stock

Mohu Jolt TV Antenna In-Line Amplifier with 6 ft USB Cable and USB Power Adapter MH-110569

  • The CleanPeak filter technology with a 15dB gain is specially designed to amplify TV signals and filter out any potential interference from cellular....
  • Designed for passive TV antennas, the Jolt offers a sleek appearance that will enhance both the TV antenna's visual appeal as well as improve the....
  • Jolt TV antenna in-line amplifier offers two power options - either with the USB port on the back of your TV while only using power when your TV is....
  • Revoltionary Clean Peak filter technology with 15dB gain and a low-noise figure to filter out cellular and FM signals and amplify the TV signals you....
Check Stock

Monoprice 6.5in and Ribbon Tweeter 2-Way Bookshelf Speakers (Pair) Black

  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer....
Check Stock