ReviewsPower Line Fitting Clamp

NEXADD Fuel Line Pliers Set 4Pcs | Hose Remover Pliers | 9 Inch Fuel Filter Caliper | Hose Pipe Clamp Clip | 80 Degree Disconnect Pliers Set for Auto Maintenance with Storage Case

...o kits instead of buying each tool . Just Add to Cart!.
Hose Remover Pliers★-The best tool for removing hose clamps for fuel and small water hoses.To remove hoses from transmission,rubber hoses connect to cooler lines. Even if can't fit both sides (hose/tube)between fitting and hose.Slide one side in and work hose out then get both sides in, give handles a squeeze and Voila" off comes hose.Hose remover pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners,etc.Remove fuel vacuum or heater hoses from 5/32”to 1/2”(4mm to 14mm)..
Fuel Line Clip Removal Pliers ★-The fuel line clip removal pliers suitable for removal and replacement of connections on fuel filter lines (petrol & diesel).Required when removing and replacing fuel filters.Upgarded maximum opening approx: 9.3CM/3.66IN.NexADD fuel line clip removal tool suitable for use in large space.Fuel line hose clamp pliers designed to compress the quick disconnect lugs without damaging connector.Suitable for VW, Audi, Fiat, GM,Vauxhall,Mercedes and other makes and models..
9" Length Fuel Filter Calipers ★- Releasing connect....

Check Stock

Waekon 20560 ABS Sensor Pinpoint Tester

Measure AC current via the clamp, and AC/DC voltage, resistance and continuity via test leads.
Detects the most common wiring problems in standard and GFCI receptacles including open ground, reverse polarity, open hot, open neutral and....
Line splitter allows the measuring of current draw up to 15A without splitting the load's power cord.
CAT III 600V, Class 2, Double insulation safety rating.
AC Auto-Ranging 400 amp digital clamp meter.

Check Stock

Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump

Adapts an aftermarket 1982-1988 T-Bird/Cougar type rack to a GM Type 1 Saginaw pump.
Pressure line has a 5/8"-18 male inverted flare fitting at the pump end.
Adapter for the GM pump, to allow it to work with both metric O-ring and standard inverted flare style threads on the power steering pump fitting..
Features a -6AN to an 9/16"-18 O-ring fitting on the rack end.

Check Stock

Flixall Hose Clamps Stainless Steel- 60pcs Metal Clamps Assortment- Screw Driver- Durable Hose Clamp Kit with Adjustable Sizes- Automotive, Plumbing Use

[Excellent Grip] - With strong grip and high quality material these worm gear hose clamps can hold well onto the hose and pipes for a very long time. Different sizes are included in our clamp set so you never go out of options.
[Adjustable Size, Easy Replacement] - Never worry about fitting your hose on a smaller tap or sprinkler as measured perforation and evenly distributed holes allow clamp size to be adjusted according to your use. Moreover, if you don't find our product or packing up to the mark, feel free to contact us for a replacement, no questions asked!.

Check Stock

THKFISH Fishing Line Spooler Fishing Line Winder Spooler Fishing Accessories Adjustable Stable Portable Fishing Line Spooler with Clamp A-Long Style

STABLE STURDY AND POWERFUL: Fishing line spooler with clamp . Not easy to loose, fast and easy to entangle. Built-in anti-slip mat, the clip is more stable and not easy to loose. Clamp its very powerful and will hold up to the stress of the line pull. Please note that the reels and line are only for spooling reference, NOT INCLUDING in the package(The cloth bag is included in the package)..
MULTIPLE USE LINE SPOOLER: A most have for fisherman. Multiple uses, whether you are at home, boats, truck, or basically anywhere,you can easily take and use this fishing line winder. It is easily portable and can be mounted on anywhere that you can clamp it to. Clamps bottom, no limited by flat or smooth surfaces, and you will get a better hold to spooler by clamping it at the edge of desk, chair and so on..
ADJUSTABLE MAXIMUM THICKNESS: Maximum thickness of Five Style Line Spooler are all 2.44in/6.2cm. It is adjustable, make fishing more conveniently. C-clamp that can attach to your table, workbench, tailgate, etc. Like a C-clamp, you spin the threaded rod to tighten the clamp onto your table. Fishing Line Winder makes fishing better!.
PRACTICAL 2 WAYS FOR USING: The two ways shows as the picture, you could the one way that you like. Double-headed fa....

Check Stock

O'SKOOL 4-Inch (Inside Diameter) to 2-1/4-Inch (Inside Diameter) Dust Collector Fitting Vacuum Tool Port Adapter

Includes: 4" to 2-1/4" Dust Hose Reducer Adapter Fitting x 1.
Durable ABS plastic end with 2-1/2" OD (outside diameter) and 2-1/4" ID(inside diameter) is perfectly suited for standard shop vacuum hoses..
Rubber boot(4" inside diameter ) and a hose clamp fit a 4" outside diameter power tool port..
ABS plastic port is tough and wear-resistant, which can extend the use time..
Rubber boot ensures tight fit, even variations in port size..

Check Stock

100 PCS 3/4 Inch PEX Cinch Clamps, 304 Stainless Steel PEX Fitting Clamps Pinch Clamps Ring Crimp Rings for PEX Tubing Pipe Fitting Connections (Silver -3/4inch(100PCS))

✔【HIGH QUALITY MATERIAL】Pex crimp ring meets ASTM F2098 requirements that adopts 304 Premium Stainless steel material, which features sturdy and durable. Has good corrosion resistance, heat resistance, low-temperature strength, and mechanical properties. PEX barb fitting is an easy to install, low cost solution to connect PEX tubing. Compatible with All PEX Brands Manufactured with American Certification..
✔【360-DEGREE SEAL PROTECTION】These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. The 360-degree narrow stepless clamp concentrates seal compression, rest secure in any PEX pipe using the system..
✔【SPECIAL DESIGN】Special design for all PEX pipe connection fittings, Interlock Rings with 360 Stepless Design. This stepless ear clamp conforms to the ASTM International F2098 standard for securing PEX tubing to insert fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
✔【WIDE APPLICATION】Widely used in all plumbing systems, such as water heater, air condition system, pipeline system, hydronic heating system, electrical plumbing, etc. PEX barb fittings are compatible for potable water distribution and hydronic heating applicatio....

Check Stock

QMINOX 2 Inch × 1.5 Inch Sanitary Fitting End Cap Reducer Stainless Steel 304 Sanitary Concentric Reducer Tri Clamp Clover

End Cap Reducer Ferrule Size 64mm = 2 Inch Tri Clamp.
End Cap Reducer Ferrule Size 50.5mm = 1.5 Inch Tri Clamp.
Concentric End Cap Reducer Fitting to Connect 2 Pipes of Different Diameters That are Along The Same Pipe Axis.
Sanitary Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
Stainless Steel 304 Sanitary Fitting for Resistance to Corrosion and High Temperatures.

Check Stock

Klein Tools CL110KIT Electrical Tester / Maintenance Kit w/Clamp Meter Continuity Tester GFCI Tester Line Splitter Case Leads 3 x AAA

Clamp Meter measures AC current via the clamp, and AC/DC voltage, resistance and continuity via test leads.
GFCI Receptacle Tester detects the most common wiring problems in standard and GFCI receptacles including open group, reverse polarity, open hot, open....
Line splitter allows the measuring of current draw up to 15A without splitting the load's power cord.
CAT III 600V, Class 2, Double insulation safety rating.
AC Auto-Ranging 400 amp digital clamp meter.

Check Stock

Beduan Reducer Tri Clamp Ferrule Stainless Steel 304 Sanitary Fitting 2\ Tube OD to 1-1/2\ Tube OD (Pack of 1)

Reducer sanitary fitting can be used to connect two pipes of different diameters that are along the same pipe axis..
High quality 304 stainless steel, having durable and long service life..
Tube OD: reducing 2" tube OD to 1.5" tube OD - (51mm to 38mm tube OD)..
Tri clamp size: reducing 2" Tri Clamp / Clover / Sanitary to 1.5" Tri Clamp / Clover / Sanitary - (64mm to 51mm Ferrule OD)..
Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access..

Check Stock

YFYIQI ETCR007AD AC DC Clamp Leakage Current Probe Sensor Transducer Clamp Meter Sensor with Output Connector BNC Plug Clamp CT Size 7mm

☀☀(1)ETCR007AD AC-DC Clamp Leakage Current Sensor, suitable for high-accuracy AC and DC current and leakage current on-line detection below 600V, range: AC/DC 0mA~60A, corresponding output AC/DC 0~600mV, jaw size is Φ7mm.
☀☀(2)The sensor adopts the clamp-shaped CT structure, which can be measured without disconnecting the measured circuit. The slim design of the clamp head is particularly suitable for the place where the cable is densely packed. The permalloy iron core is used, and the anti-interference ability is strong to ensure the accuracy of measurement. stability..
☀☀(3)Widely used in power, communications, meteorology, railways, automotive industry, oil fields, construction, measurement, research and teaching units, industrial and mining enterprises and other fields..
☀☀(4)Detection method: Clamp CT, non-contact measurement.
☀☀(5)Voltage output: Two-speed output: 0mA~6A, 100mV/A.
Zero adjustment: Adjust ZERO key can be zero, eliminate the interference of geomagnetic field and external electric field.

Check Stock