ReviewsPower Mosfet

Audiotek AT1800S 2 Channel Stereo Car Amplifier - 1800 Watts 2 Ohm Stable LED Indicator Full Range Bass Knob Included Great for Speakers and Subwoofers

  • 2 Channel Stereo Car Amplifier - 1800 Watts | 2 Ohm Stable.
  • Bridgeable MOSFET Amplifier | Tri-mode capable | Heavy-Duty aluminum alloy heat sink.
  • Class A-B Operation | Continuously- Variable low pass crossover: 0 to +18dB | Remote Subwoofer control.
  • Nickel Plated RCA and Speaker level inputs | Remote turn-on/turn-off circuit | MOSFET pulse width modulated power supply.
  • Thermal and Speaker Short protection Circuitry | LED Power and protection indicators.
Check Stock

BSIDE ESR02 PRO Digital Transistor Tester SMD Components Meter Mega328 NPN/PNP Diode Triode Capacitor Inductance ESR Checker with Tweezers

  • [Wide Application]: It is very easy to test plug-in and SMD devices, it can also be used to test different kinds of triodes, thyristors, MOSFET,....
  • [Automatical Identification]: Smart transistor checker is able to detect NPN and PNP transistors, N-channel and P-channel MOSFET, diodes, thyristors,....
  • [2 POWER/TEST Button]: POWER/TEST button on both sides, you can operate it with your left or right hand..
  • [Typical ESR Value Table]: There is a table "typical ESR value of electrolytic capacitor" at the back, provide a clear indication that you can quickly....
  • [Added Functions]: The transistor tester will be auto power off to save energy if there is no any operation within about 10 seconds. Large LCD display....
Check Stock

Pyle PLA4478 Bridgeable Slim 4 Channel 4000 Watt Car Audio Mosfet Power Amplifier Amp with Thermal Protection for Vehicle and Car Stereos, Black (2 Pack)

  • 2 FULL-RANGE VEHICLE AMPLIFIER: Package includes 2 full-range amplifiers with 4,000-watts and 4 channels that pack power for your car speakers or stereos.
  • MOSFET POWER SUPPLY: Mosfet pulse width modulation power supply creates a clean, distortion-free signal with crisp audio.
  • ENERGY-SAVING DESIGN: Anti-thump turn on and soft turn on and turn off help save your vehicle's energy.
  • THERMAL PROTECTION: Electrical system protection mode ensures built-in fuse, overload, thermal, and short circuit protection with a LED level display.
  • SPECIFICATIONS: Slim design makes finding an installation location easy and installing a breeze.
  • Dimensions (L x W x H): 17.72 x 10.24 x 2.21 inches.
Check Stock

Audiotek AT8000M 1 Channel Monoblock Class D Car Amplifier - 8000 Watts 1 Ohm Stable LED Indicator Bass Knob Included Mosfet Power Supply Great for Subwoofers

  • Class D Monoblock Car Amplifier - 8000 Watts | 1 Ohm Stable.
  • Bridgeable MOSFET Amplifier | Tri-mode capable | Heavy-Duty aluminum alloy heat sink.
  • Class A-B Operation | Continuously- Variable low pass crossover: 0 to +18dB | Remote Subwoofer control.
  • Nickel Plated RCA and Speaker level inputs | Remote turn-on/turn-off circuit | MOSFET pulse width modulated power supply.
  • Thermal and Speaker Short protection Circuitry | LED Power and protection indicators.
Check Stock

Audiotek AT7000M 1 Channel Monoblock Class D Car Amplifier - 7000 Watts, 1 Ohm Stable, LED Indicator, Bass Knob Included, Mosfet Power Supply, Great for Subwoofers

  • Class D Monoblock Car Amplifier - 7000 Watts | 1 Ohm Stable.
  • Bridgeable MOSFET Amplifier | Tri-mode capable | Heavy-Duty aluminum alloy heat sink.
  • Class A-B Operation | Continuously- Variable low pass crossover: 0 to +18dB | Remote Subwoofer control.
  • Nickel Plated RCA and Speaker level inputs | Remote turn-on/turn-off circuit | MOSFET pulse width modulated power supply.
  • Thermal and Speaker Short protection Circuitry | LED Power and protection indicators.
Check Stock

Pyramid PB717X 1000 Watt MOSFET 2-Channel Car Audio Power Amplifier System with Soundstorm AKS8 8 Gauge Complete Car Audio RCA Wiring Installation Kit

  • PACKAGE INCLUDES: 1 Pyramid PB717X 1000 watt MOSFET 2-channel car audio power amplifier system and 1 Soundstorm AKS8 8 gauge complete car audio RCA wiring installation kit.
  • AMPLIFIER: The Pyramid amplifier features a 1000 watt max power, a 2 channel bridgeable amplification, a variable gain control, a MOSFET power supply, low level RCA inputs, a high level low impedance MOLEX input connector, LED indicators, and a automotive type fuse protection.
  • WIRING KIT: The amplifier installation wiring kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect.
  • DIMENSIONS: Dimensions: 9.84'' L X 10.03'' W X 1.96'' H.
  • WARRANTY: The amplifier and the wiring kit both include a 1 year manufacturer warranty.
Check Stock

New SKAR Audio RP-2000.1D 2800 WATT MAX Power Class D MONOBLOCK SUB Amplifier

  • ... reason. Designed for maximum power, efficiency, and affordability, every feature of this amplifier exemplifies its high quality engineering. This amp is rated at a conservative 2,000 watts RMS power at a 1 ohm operating load, and is capable of putting out over 2,800 watts max power at 1 ohm..
  • Featuring a high speed MOSFET power supply, 4-way protection circuitry, advanced PCB board design, and other internal high quality components, the RP-2000.1D outperforms anything else in its class when it comes to power and reliability. This amplifier comes with a bass knob & remote wire allowing the user full control over their bass from the front of the vehicle. This makes for a great amplifier when looking for serious power to get your system loud, and will work great on a single subwoofer a.
  • Skar Audio RP-2000.1D Monoblock Car Subwoofer Amplifier 1 Ohm Stable Class D Monoblock Subwoofer Amplifier 4 Way Protection Circuitry: Thermal, Voltage, Speaker, DC RMS Power @ 4 Ohms: 800 Watts x 1 Channel (14.4v) RMS Power @ 2 Ohms: 1,400 Watts x 1 Channel (14.4v).
  • RMS Power @ 1 Ohm : 2,000 Watts x 1 Channel (14.4v) Max Power @ 1 Ohm: 2,800 Watts x 1 Channel (14.4v) MOSFET Power Supply Soft Turn on Circuit Frequency Response: 20Hz~250Hz Signal to Noise Ratio: 85dB.
Check Stock

Sundown Audio Salt Series Monoblock Digital Class-D Amplifier (Salt-8 8000W Rms)

  • Power – 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms.
  • Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Check Stock

BOSS Audio Ohm Stable Car Amplifier with Remote Subwoofer Control

  • ...size/weight, reduced power waste, smaller heat sink, compact circuitry.
  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to.
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Strapping Capable - You are able to strap two R3400D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power.
  • Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion.
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • Specs - Dimensions: 13.5 x 10.44 x 2.25, Weight: 7.63 lbs..
Check Stock

DS18 EXL-6.2D 6.5-Inch Subwoofer,Dual 2-Ohms 800W Max 400W RMS- 1 Speaker EXL-X6.2D

  • Power - 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms.
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class....
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current....
  • Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and....
Check Stock

Pump Boys and Dinettes

  • ...’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Mosfet Power Supply – A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
  • Variable BASS Boost – With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s).
  • Bridgeable – Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels.
  • Specs – Dimensions: 13.5” x 10.31” x 2.25, Weight: 12 lbs..
  • Warranty – BOSS Audio Systems provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this prod....
Check Stock