ReviewsPower Pass

C25S - Smooth Stepper Terminal Board

Full access to all the pins of the Smooth Stepper Board. Connects directly to the Smooth Stepper (from Warp9). The board is provided with sockets that allow the Smooth Stepper Board to be plugged directly into this board. No ribbon cables required. When using the Smooth Stepper board there is no need to use an additional power supply to power the board. It will draw power from the Smooth Stepper board. Built-in Passive Low Pass Filters for the all inputs..
C25 Smooth Stepper Breakout Board with push lock terminals.

Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..

Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..

POWER: Maximum Power Output of 5000 Watts at 1 Ohms into one channel. Maximum Power output of 2500 Watts at 2 Ohms into one Channel. This amplifier is....
HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. This input will be used to connect the EV5000D to your factory....
LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the EV5000D with the source....
LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. A low-pass filter will....
VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..

2000 W MAX Bridged Power @ 4 Ohm x 1 Channels.
Full-Range, Class A / B Topology, MOSFET Power Supply.
Low and High Level Inputs, Variable Low Pass Crossover, Variable High Pass Crossover.

power: max power output of 1500 watts at 2 ohms into one channel. maximum power output of 750 watts at 4 ohms into one channel. this amplifier is....
high level inputs: speaker level inputs are commonly referred to as high-level inputs. this input will be used to connect the ac1500.1m to your....
low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac1500.1m with the source....
low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. a low-pass filter will....
variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it.

LATEST MODEL: Replaces DKT30CSDHPD with Power Delivery 3.0 featuring Fast Role Swap to prevent USB device drops when power is added/removed on PD 3.0 laptops.
plus, the USB-C port can be used for PD Pass-through or data.
USB-C MULTIPORT ADAPTER: Portable USB C travel docking station with 4K 30Hz HDMI video output.
aluminum space gray design complements Macbook Air, MacBook Pro, Dell XPS, HP EliteBook laptops.
6-IN-1 USB-C HUB: This USB C multiport adapter features 4K HDMI (UHD), 2x USB-A 3.0 (5Gbps) and 1x USB-C (Data or Power Delivery 3.0 Pass Through), SD / SDHC / SDXC card reader slot & Gigabit Ethernet.
60W PD 3.0 PASS THROUGH: Use a USB-C power adapter to charge laptop (up to 48W) & power the dock (12W).
Prevents USB device drop out when the power is added/removed on PD 3.0 laptops like MacBook Pro.
WIDE DEVICE COMPATIBILITY: USB-C mini dock works w/ Thunderbolt 3 (TB3) laptops/Ultrabooks.
USB-C laptops, Ultrabooks, Chromebooks, tablets & phones for brands like MacBook, HP, Dell, Lenovo, Surface.

The G1800.4D has a power rating of 4x300 watts RMS at 4 ohms 4x420 RMS at 2 ohms, 2x740 at 4 ohm bridge, and 3600 MAX at the two load it was designed for, giving you pure and clean power on demand..
Small and powerful design so you can power your subs with great efficiency and power without taking up much space.
Integrated low pass and high pass filter to help you get the perfect response you are looking for..
High quality terminals that look great and will transfer your power and signal with no loss..
This amp has the power to drive your speakers but also not take up much space because of the new compact design and technology that will keep your amp playing cool and loud..