ReviewsPower Plate

Rockville K5 W8K5S2 8 800w 2 Ohm Car Audio Subwoofer Sub 200w RMS CEA Rated!

  • Features: Rockville W8K5S2 K5 Series 8" 2-Ohm Car Subwoofer, Peak Power Handling: 800 Watts, Program Power Handling: 400 Watts, CEA Rated RMS Power....
  • Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone – This cone is very efficient which makes the speaker sound louder even without requiring....
  • Chrome-Plated Binding Post Terminals - These are the best terminals on the market and they accept any gauge wire, Impedance: Single 2-Ohm Voice Coils,....
  • We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated,....
  • Detailed Info: Body: Non-Pressed Paper, Gap Plate Inside Diameter: 60mm (2.36 inches), Gap Plate Outside Diameter: 120mm (4.72 inches), Gap Plate....
Check Stock

NEW NOS SNIPER WET NITROUS PLATE KIT,150-250 ADJUSTABLE HORSEPOWER,10 LB ORANGE BOTTLE,COMPATIBLE WITH 4 BARREL HOLLEY 4150 SQUARE FLANGE),4500 DOMINATOR,SPREAD BORE QUADRA JET & CARTER AFB

  • Brand New NOS Sniper Wet Nitrous Plate Kit, 150-250 Adjustable Horsepower, 10 lb Orange Bottle, Compatible with 4 Barrel Holley 4150 Square Bore & Carter AFB (Holley Part #07002NOS).
  • NOS have built on the very popular, budget friendly, Sniper nitrous kits for those who need a little more power from their engines. The new Sniper 250 kits step up the power potential to an additional 250 horsepower, in a low cost single nitrous plate kit, for the popular carburetors, Holley 4150 (Square Flange) Part #07002NOS, 4500 (Dominator) Part #07003NOS & Spread Bore (Quadra jet) Part #07007NOS..
  • These single stage wet kits have everything needed to add some extra power to your engine. Includes a 10 lb. Sniper orange nitrous bottle, 14 ft. -4AN feed line, stainless bar nitrous plate & the new, large body, Sniper Solenoids. Also included is all the hardware required as well as nitrous & fuel jetting for power levels of 150, 175, 200 & 250 HP..
  • Features: Budget Friendly | Easy to install | All installation hardware included | Up to 250 additional horsepower | Large Nitrous & Fuel Solenoids | Included jetting for 150, 175, 200 & 250 HP | 14' long -4 AN Hose Length.
  • NOTE: It is important to follow the install instructions & to insure the fuel system has the capacity to sup....
Check Stock

Rockville VS15K52 15' K5 2000w Car Subwoofer in Vented Sub Enclosure Box - 2 Ohm

  • Features: Rockville VS15K52 Single 15″ K5 1400w Car Subwoofer Pre-loaded In Vented Sub Enclosure, Peak Power Handling: 2000 Watts, Program Power Handling: 1000 Watts, CEA Rated RMS Power Handling: 500 Watts.
  • Vent dimensions (inches): 2.5″ x 13″ x 12.5″, Tuning frequency of enclosure: 35 Hz, 2.5″ 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire.
  • Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone – This cone is very efficient which makes the speaker sound louder even without requiring a lot of power to push it, Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion.
  • Mounting Gasket with Rockville branding Makes it Easy To Mount the Subwoofer Air-Tight, High BL Magnetic Motor Gap, High grade black glue that handles extremely high temperatures which allows our woofer to handle even more power.
  • Detailed Info: Body: Non-Pressed Paper, Gap Plate Inside Diameter: 85mm (3.34 inches), Gap Plate Outside Diameter: 170mm (6.69 inches), Gap Plate Thickness: 25mm (0.98 inches), Yoke Outside Diameter: 156mm (6.14 inches).
Check Stock

LEM Products 17791 Big Bite #8 .5HP Stainless Steel Electric Meat Grinder, Silver & Products 1606 5-Pound Stainless Steel Vertical Sausage Stuffer, silver

  • Product 1: Your purchase includes One LEM Stainless Steel Electric Meat 8Grinder | Meat Stomper, 1 Steel knife, stuffing plate, fine plate (3/16"), coarse plate (3/8"), 3 Tubes (1/2”-1”-1 1/8”), meat pan & plate extractor.
  • Product 1: Grinder meat pan – 12-1/4” x 9-1/8” x 2-1/4” Deep | Power – .5 HP | Power consumption – 370 Watts | Voltage – 120V | Frequency – 60 Hz.
  • Product 1: Added Tray in Body for Knife & Plate Storage.
  • Extended Auger Pulls More Meat in less Time.
  • Product 1: Modernized Brushed Steel Finish - Minimizes Fingerprints | Rifling Pattern in Head Pushes Meat Forward with less User Interaction.
  • Product 2: Cylinder holds 5 Pounds of meat.
  • Cylinder removes easily to fill and clean.
Check Stock

LEM Products 17801 Big Bite #12 .75HP Stainless Steel Electric Meat Grinder & LEM Products 1606 5-Pound Stainless Steel Vertical Sausage Stuffer, silver

  • Product 1: Your purchase includes One LEM Stainless Steel Electric Meat 12Grinder | Meat Stomper, 1 Steel knife, stuffing plate, fine plate (3/16"), coarse plate (3/8"), 3 Tubes (5/8”-1”-1 3/8”), meat pan & plate extractor.
  • Product 1: Grinder meat pan – 12-1/4” x 9-1/8” x 2-1/4” Deep | Power – .75 HP | Power consumption – 550 Watts | Voltage – 120V | Frequency – 60 Hz.
  • Product 1: Added Tray in Body for Knife & Plate Storage.
  • Extended Auger Pulls More Meat in less Time.
  • Product 1: Modernized Brushed Steel Finish - Minimizes Fingerprints | Rifling Pattern in Head Pushes Meat Forward with less User Interaction.
  • Product 2: Cylinder holds 5 Pounds of meat.
  • Cylinder removes easily to fill and clean.
Check Stock

Mophorn Magnetic Stirrer,200W, 2000RPM,with Digital Temperature Display & Speed Adjusting, Magnetic Mixer with Hotplate 110V Magnetic Stirring Mixer 85-2,1000ML

  • Rapid Heating Hot Plate: Heating Power: 200W.
  • Max. Temperature: 212℉/100℃. This hot plate stirrer digital features excellent thermal conductivity, achieving fast and uniform heating up to 212℉/100℃. Further, its heating plate is made of high-quality stainless steel, precluding worry about corrosion, rust, or scratch..
  • Stable & Stepless Stirring: Motor Power: 25W.
  • Max. Stirring Capacity: 1000 ml. The powerful copper DC motor drives the stirring hot plate at the stepless speed regulation of 0-2000 rpm, ideal for any demanding overhead mixing task. A PTFE-coated stir bar helps to mix 1L liquid stably..
  • Accurate Display & Control: Our magnetic stirrer is completed with a digital LED screen, which shows the precise setting of the temperature with a ±0.1℃ display accuracy. The alarm light is on when exceeding the set temp. The adjusting knob allows granular control of the stirring speed with great precision, simplifying the fine-tuning..
  • Adjustable & Secure Design: The heated stir plate contains an adjustable support rod, which tightly secures the temp sensor at whatever height you need for your mixing containers. Once approaching voltage overloading, a built-in fuse will cut the power to keep your lab secure. 4 non-s....
Check Stock

Electric Magnetic Door Lock 280kg, Strong Force Access Control for Door Cabinet Drawer, Magnetic Gate Lock for Door Lock Gate Lock for Metal Door Wooden Door

  • ELECTROMAGNETIC LOCK-this power door lock kit includ 1 * Magnetic Door Lock, 1 * Hanging Panel, 1 * Package Mounting hardware kit, and Use magnetic power to lock the door, 280kg(617.3lb) holding force. Applicable door type File cabinet, shopping cabinets, drawers, small doors and so on..
  • MAGNETIC GATE LOCK FOR DOOR-Compared with traditional locks, its advantages are strong suction, low power consumption, stable and reliable quality, and electromagnetic locks will generate strong suction to tightly absorb the adsorption iron plate to achieve the effect of locking the door..
  • MAGNETIC DOOR LOCK-This electric magnetic lock consists of an electromagnet and an armature plate used for access control door locks. By attaching this to the door frame and the armature plate to the door, a current passing through the electromagnet attracts the armature plate, holding the access control door lock shut. When power off, the door will open..
  • SECURITY MAGNETIC GATE LOCK-This electric magnets can obtain the actual 280kg linear tension, designed with anti-theft screws, and the bottom is engraved with sunshade, which is non-slip and durable. Built-in directional surge protection, safe and durable..
  • MAGNETIC HOLDINGS FORCE LOCK-the size of this magnetic holdings force lock is....
Check Stock

Ade Advanced Optics Delta RD3-012 Red Dot Reflex Sight for Sig Sauer P365 Handgun Pistol, Black

  • Comes with a Picaitnny mounting plate. Also comes with ADE all new designed adapter plate is to REPLACE the rear sight for Sig Sauer P365 Handgun.
  • The handgun mounting plate only fits Sig Sauer P365 base Model. It does NOT fit P365XL which is already Optics Ready. ADE have a different plate made to fit P365XL that allow ADE RD3 series and other Doctor/Vortex Venom type red dot to be able to fit P365XL.
  • Delta RD3-012 Red dot. Top load System, no need to Remove the sight to change the Battery. 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dialing plate, User Manual, Installation screws and Picatinny mounting plate..
  • 1.75" length x1.25" width x1.15" height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A windage and elevation adjustments.
  • Two button adjustments. One UP ARROW and one down ARROW to adjust brightness. Press and hold Up Arrow for 3 secs to power on, and hold Down Arrow for 3 secs to power off..
Check Stock

Balelinko Extended 9' Olympic Weight Plate Holder, Weight Plate Storage, Attachment for for 2'x2' Tube Power Cage with 1' Hole, 1 Pair, Bonus a Pair of 2' Spring Clip Collars Rings

  • BE USED WITH: Balelinko 9" extra long Weight Plate Holder can be easy to install and fit most power cages with 2" x 2" steel tubes with a 1" Hole. 2 inch diameter for Olympic weight plates, and 2 FREE spring clips included for securing weight plates. Heavy duty design up to 250 lbs per plate holder weight capacity and the total set can hold 500 lbs..
  • STRONG CONSTRUCTION: Balelinko Weight Plate Holder is made of solid stainless steel with black powder-coated to prevent item from being corrosive, rusty or broken apart and extend the age after a long time using..
  • SAVE YOUR SPACE: : This pair of weight plate holders is the perfect alternative for bulky & space-consuming weight plate trees. Sleeve length is up to 9”, extra-long so you can have more room to put your weight plates. The holders are especially perfect for home gym, garage gym, or commercial fitness facilities with a small space..
  • EASY TO USE: Easy to insert and lock-in design, just slide pin into power rack's hole and swing down to lock in place. This smart design makes it more convenient for loading and unloading the weight plates..
  • PURCHASE IN ASSURANCE - Note: Balelinko Olympic Weight Plate Holder Bonus a Pair of FREE Spring Clip Collars Rings, does not fit Power Cage (3"x2"). 1-year limited....
Check Stock

Rockville VS10K54 10" K5 1200w Car Subwoofer in Vented Sub Enclosure Box - 4 Ohm Black

  • Features: Rockville VS10K54 Single 10" K5 1200w Car Subwoofer Pre-loaded In Vented Sub Enclosure, Peak Power Handling: 1200 Watts, Program Power Handling: 600 Watts, CEA Rated RMS Power Handling: 300 Watts.
  • Vent dimensions (inches): 2" x 6.5" x 8", Tuning frequency of enclosure: 35 Hz, 2" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire.
  • Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone – This cone is very efficient which makes the speaker sound louder even without requiring a lot of power to push it, Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion.
  • Mounting Gasket with Rockville branding looks great and Makes it Easy To Mount the Subwoofer Air-Tight, High BL Magnetic Motor Gap, High grade black glue that handles extremely high temperatures which allows our woofer to handle even more power.
  • Detailed Info: Body: Non-Pressed Paper, Gap Plate Inside Diameter: 70mm (2.75 inches), Gap Plate Outside Diameter: 140mm (5.51 inches), Gap Plate Thickness: 25mm (0.98 inches), Yoke Outside Diameter: 130mm (5.11....
Check Stock

Othmro LED Chip Bulb Lamp 3W 9-10V Cob LED Chip Light, 50mm Length for Replacing The Light Source Super Bright High Power or Floodlight Bright Light 1pcs

  • 【Material】-This LED Chip Bulb is made of high quality Auminum board, durable for daily use,low heat generating.
  • 【Advantage】-The LED light Panel has low consumption,high brightness,high Power LED,saving power,very low heat generating.
  • 【Wide Application】-This Aluminum Base Plate Panel is widely used in the replacement of LED downlights, track lights, flooAdlights, flashlights, stage lights.
  • 【Note】-The LED lamp board must be powered by constant current LED driving power supply, and the output parameters of the power supply are consistent with those of the lamp board.
  • The LED lamp plate must be installed on the aluminum radiator,otherwise the lamp plate is easy to burn out at high temperature.
Check Stock