ReviewsPower Relay Series

12 Volt Timer Relay, DROK 0.1s to 999min 50mA 4-Mode On-Off Automotive Digital Delay Relay, Electric Delay Timer Switch, Cycle Time Delay Module with LED Display

4 MODE TIME DELAY RELAY: DROK 12V relay is provided with 4 different settings and supports various triggering signal source, like positive side of power supply triggering, Button, PNP sensor, PLC signal, which is available for most of applications..
WIDE ADJUSTABLE TIMING RANGE: This off delay relay supports widest timing range, 0.1 seconds to 999 minutes adjustable, which can fulfilled your various need..
STRONG ANTI-INTERFERENCE ABILITY: The output of digital timer relay adopts optocoupler isolation, which enhances the capacity of resisting disturbance power consumption..
SUPER SIMPLE OPERATION: Our relay board is operated by buttons and the delay module is equipped with LED digital display which is convenient for you to check the set value..
AUTOMATIC SAVING FUNCTION: After you finish the setting, you can cut off the power and then the parameters will be saved automatically, handy and convenient..

Check Stock

DPST 1NO 1NC 8Amp Power Relay Module, Briidea 24V AC/DC Power Relay Control Voltage, White

INPUT CONTROL SIGNAL: Voltage AC or DC 24V, Current 17mA..
OUTPUT CURRENT: Output switch DPST 1NO 1NC(Double Pole Single Throw, 1 Normally Open and 1 Normally Close ), rated current 8A/250VAC or 8A/30VDC (one switch)..
SIMPLE & PRACTICAL: This passive power relay module is simple and practical, which is very convenient to use. It can support both Normally Open and Normally Close..
EASY MOUNT: The power relay is of compact plastic case and wires connects for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw..
LED INDICATION: This power relay has a led indicator for relay action indication. It is obvious to know the status of the switch at a glance..

Check Stock

ELECTRONICS-SALON DPDT Signal Relay Module, 12Vdc, RY12W-K Relay. Has Assembled.

This item has been assembled, and electrical test passed..
Size: 50 x 34.9 x 16 mm (approximately 2" x 1.37" x 0.64"), PCB thickness: 1.6mm..
high quality signal relay, FR-4 Fiber glass PCB, darlington transistor driving relay, LED indicator for relay action..
Relay Contact Material: Gold Overlay Silver-Palladium..

Check Stock

AITRIP 8 Pack 3V 1 Channel Relay Power Switch Module with Optocoupler Opto Isolation High Level Trigger for IOT ESP8266 Development Board

【30VDC 250VAC Load】 Equiped with high-current relay, AC250V 10A.
DC30V 10A, each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
【High Level Trigger】The relay module is triggered by high level signal, which can be input from microcontroller IO..
【 3V/3.3V power relay module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
【Wide Application】- These 3v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/ ESP8266 module etc..
【Long Life】 - Fast response time less than 20ms and long lifetime up to 100,000 times snap action with diode freewheel protection..

Check Stock

Hilitand AD22B04 12V Signal Decoder 4 Channel DTMF Tone Relay Phone Remote Control PLC

【12V】Working voltage is DC 12V, you can easily find suitable power for this relay..
【reverse polarity protection.】This signal decoder relay ahs reverse polarity protection which can extend the service life..
【8 modes】8 modes of operation: Non-locking (Momentary ), self-locking (Toggle), inter-locking(Latch), 5/20/60/120/250-second delay..
【default control】The default control command is 1/2/3/4. Example: Dial 1 to control relay 1, dial 2 to control relay 2, dial 3 to control relay 3, dial 4 to control relay 4.
control commands can be changed any 1-4 bits. (For more details, refer to "AD22B04_4 channel DTMF controller commands setting manual ")..
【operating current】Standby 11-13 MA, 1 relay "open" 44MA, 2 relays "Open" 77MA, 3 relays "Open" 110MA, 4 relays"open" 140MA..

Check Stock

ARTGEAR Automotive Relays for Car Truck Motor Boat Car Starter - 12V DC 120 Amp Split Charge Relay Switch with 2 Pin Footprint + 2 Terminal

【Continuous Relay】 You can use it as continuous relay, if the relay keeps working for 5 hours, it would be better to stop it and then use it again . It could pass continuous 50A~60A current.
【Package Contains】 1 x Heavy Duty Split Charge 120A ON/OFF Relay.
【Large Capacity】 Up to 120A coil capacity able to handle those high current applications with ease, Heavy duty make or break (on/off) relay.
【Long service life】 Life Expectancy Electrical: 100,000 Operations (at 30 Operations/min) Life Expectancy Mechanical: 10,000,000 Operations, keep a high level in ongoing work.
【Applicable】 High Power automotive relays provide standard contact form, and has the standard 4 pin layout, fit of starter kills, dome light supervision, trunk release, polarity change, power door lock/actuator control etc.

Check Stock

70955

FEATURES: 12 position terminal block for accessory attachment.
6 40-amp cube style relays (plug-in style).
6 Diodes to prevent LED “field collapse”.
Inline 50amp manual resetting circuit breaker.
8 gauge power leads with crimped and soldered terminal for connection to the battery.
Integrated LVCO (Low-Voltage-Cut-Off) circuit.
Fuse for LVCO which can be removed to bypass the LVCO.
High-temp, abrasion resistant wiring cables.
KIT CONTENTS: (1) Switch pod w/ 6 Rocker Switches, (1) Switch pod wiring harness, (2) Switch pod mounting brackets, (1) Relay pod, (1) Relay pod power wire, (1) Relay pod ground wire, Mounting hardware.

Check Stock

American Zettler Power Relay, SPDT, 30A, 115v, Mini, 30A SPDT 120VAC AZ2280-1C-120A( Pack of 2)

Zettler Miniature Power Relay 30A SPST 120VAC AZ2280-1A-120A.

Check Stock

Wiring Harness 1 Lead, YCHOW-TECH Wiring Harness for LED Light Bar 12V 40A On/Off Rocker Switch Blade Fuse Power Relay Heavy Duty Light Bar Wiring Harness Kit for Truck UTV AVT Boat

Power Relay Fuse: 30A Fuse. Our luxurious Nylon Wiring Harness Kit loads capacity is up to 400W auxiliary lights or other devices, perfect compatible with all devices that use a 12V power source..
HIGH DURABILITY - The flexible strand copper wire and nylon shell provide outstanding electrical conductivity, high temperature resistance and melting resistance..
SAFETY PROTECTION - Power relay for safety and conversion circuit, blade fuse for overload and short-circuit protection. Double protection for you to drive away from danger..
8.2 FT Length Wiring Harness - Approx. 8.2 ft of cable from relay to the lead, the wire is long enough to reach all the part you need..
Package Include - (1) 8.2 ft Nylon jacket wiring harness.

Check Stock

Lisle 69300 Master Relay Test Jump Set

Includes 8 Jumpers to fit most popular relays.
Includes Test Lead Kit for easily and securely connecting Relay Test Jumpers to a multimeter.
Terminal Leads with switch, fuse and power options provide easy access to check current or voltage on many fuses and relays used on vehicles today.
Also allows testing of relay configurations not covered by eight Relay Test Jumpers, like Volkswagen, BMW and other European vehicles.
Relay Puller Pliers easily remove electrical relays.

Check Stock

Aoicrie 5Pcs DC 5V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
Wide Application These 5V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine /etc..

Check Stock