ReviewsPower Right Angle Drills

Flexible Drill Extension Hex Shank Drill Nut Driver Bit Set, 2pcs Bendable Drill Bit Extension, 3pcs 1/4 3/8 1/2\ Universal Socket Adapter Set, 105° Right Angle Drill, 3pcs Screwdriver Bit Set

  • ...Magnetic Extension Chuck Adapter Quick Release Bar Socket Screwdriver Bit Holder | 60mm/ 100mm/ 150mm Length,Suitable for electric, pneumatic screwdrivers and other screwdriver bits of power tools, drill extended..
  • Widely Used: Installed in the installation of pneumatic screwdrivers, electric screwdrivers, pneumatic drills, manual screwdrivers and other hexagonal tools. A must-have package for conversion. Sufficient quantity and variety of tools to meet your various needs..
Check Stock

Drill Doctor 750X Drill Bit Sharpener with 180 Grit Wheel and 100 Grit Wheel

  • High-quality accessories: The diamond sharpening stone is made of high-quality ABS plastic and brown corundum grinding wheel. It has high hardness, rust resistance, sturdiness and durability. It is suitable for grinding iron drills, but not suitable for very high hardness drills. (If the product with high hardness is ground, it will be shorter than the service life)..
  • Convenient to carry: You can carry this diamond sharpening stones portable drill bit sharpener in your truck toolbox so that you don’t have to go to the hardware store to buy it. In a critical juncture, this tool will do your job well enough, Saving the days of manually searching for the correct angle or accidentally making the edge of the tool tapered..
  • Wide application: The drill bit sharpener is made of a standard hexagonal shank, which is widely applicable. The hexagonal shank has a 6.35mm (1/4) shank diameter on the opposite side. It is suitable for 2~15mm drills. The angle and width can be adjusted. It is suitable for manual and pneumatic screwdrivers. It is very convenient to apply various tools..
  • Increase the life of the drill bit: Small house repair work makes your drill bit dull. These diamond sharpening stones make them brand new. After using it on the drill bit sharpener, the....
Check Stock

ZOTOP 90/105 Degree Right Angle Drill, 3 PCS Angle Extension Power Drill Attachment with 1/4'' Hex Impact Shank, Flexible Shaft Adapter, Magnetic Socket Angled Drill Bit Holder for Screwdrivers, Drill

  • What You Get: Our angle expansion drive contains 3 items-90 degrees (5.91x0.18x1.33in), long 105 degrees (5.51x1.96x1.33in), and short 105 degrees (2.36x1.18x0.83in) adapter. Different angles make your work easier in narrow places..
  • Thoughtful Design: Each angle drill attachment has a built-in magnetic interface with a 12 mm hole depth. It can clamp tightly and is uneasy to fall. The 1/4'' hex bit is convenient to quickly change. Different lengths of hex for different places..
  • Smooth Rotation: The 90/105 degree angled drill bit adapter can rotate left and right. It can be used to screw the screws with an armrest in a small space, which is particularly labor-saving. No longer worry about the inconvenience of the small space..
  • Premium Material: The 90° angle drill driver housing is made of plastic. The drill bit is cemented carbide, the same as the two 105° drivers, high hardness, wear resistance, heat resistance, uneasy to break. The high temperature will not damage it..
  • Wide Adaptation: Magnetic socket angled adapter can be used with electric drills, rechargeable drills, screwdrivers, and others, extending them to narrow places, screwing nuts, makes your work easier. Not recommend using wind guns with large torque..
Check Stock

Drill Angle Gauge, 3Pcs Drill Bits Angle Gauge Set Dirll Sharpener Tools S/S Angle Measuring Gage Drill Bit Angle (60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 °, 160 °)

  • 【Material】: This Angle gauge set is made of high quality stainless steel, high hardness, and durable in use..
  • 【Design】: It is a practical Angle gauge set in drill bits Angle measuring and drill sharpener inspection,and comes with a case, convenient for carrying out..
  • 【Feature】: Diameter drill front edge of the protractor 50 gauge 118 ° apex angle of twist drills grinding gauge suitable for 118 ° apex diameter of not more than 50mm of grinding twist drills..
  • 【Drill Apex Angle】: Check the drill apex angle (60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 °, 160 °). Cutting tool angle is 60 degrees for a tooth-shaped angle 55 degree angle and metric thread, inch thread inspection, blade and special measuring tools for measuring angles.
  • 【Usage】: Suitable For: Angle measurement.
Check Stock

Ram-Pro Stainless Steel Wire Brush for Power Drill Impact Brass Driver - Cleaning Brush Hex Shank

  • ✓ THIS PRODUCT: Is Suitable for multiple uses. Keep one in your car, garage, office and kitchen With 100% satisfaction. Unique power tool accessory for cleaning, polishing, paint/rust removal.
  • ✓ Specifications: 5/8"-diameter x 2" brush, fine all-stainless steel wires, 1/4" quick-change hex shank fits power drills, impact drivers, die grinders, Length overall 4-3/4".
  • ✓ Quality: The finest quality Brushes to give you long service on the toughest cleaning jobs. These cup brushes are ideally suited for cleaning castings, structural steel and sheet metal. Durable Material: Stainless steel + Brass copper, strong and durable, can clean rust and detail completely, Hang-up hole for convenient storage..
  • ✓ Design: Designed for easy access into narrow holes and confined areas, Designed for use on right angle grinders. welding wire brushes are suitable for cleaning steel parts, machinery, the unfinished metal parts, paint stains, special corrosion without damaging surfaces or fine features.
  • ✓ USES: Innovative spiral knotted wires construction for a narrow face and precision deburring, rust, spatter and paint removal, surface conditioning and preparation. Wire brushes are made of brass, stainless steel, strong and durable, can clean rust and d....
Check Stock

DAREX Drill Sharpener V-390

  • Forget the days of trying to find the correct angle by hand or accidentally tapering the edge of your tools. Improve the utilization of drill bits, solve the troubles you have been buying drill bits, save time and save money..
  • Portable tools that you can carry around and don't take up space in your backpack..
  • Made of high-quality ABS plastic and brown corundum grinding wheel, High hardness, rustproof, solid and durable,self-centering point, do not need assistant center drilling or center punching..
  • Compact and portable drill grinding tool, Use this drill bit sharpening tool with your power drill to keep bits sharp and ready for use,With simple structure and great material, the grinding wheel drill bit has good sharpening effect, saving much effort. Great for fast drilling, tapping,etc. And Fast replacement composite cone, uses drill edged principle..
  • This diamond Drill Bit Sharpener is mainly used for grinding iron drills, not suitable for other high hardness drills.
Check Stock

6 PCS Diamond Core Drill Bits Set Tile Hole Saws 1/4” to 1-1/2” for Granite Quartz Porcelain Tile Marble with 3/8” Hex Shank Adapter Fit Angle Grinders & Drills, 6 8 10 32 35 38mm

  • Tough and Durable - Vacuum Brazed Diamond Hole Saws ideal for Dry/wet drilling in Granite Quartz Porcelain Tile, Marble, Stone countertops, Masonry, Brick and more hard materials.
  • Work with Both Angle Grinders and Electric Drills - All the bits built with 5/8"-11 Female Thread compatible with most popular brand Angle grinders. A 3/8” Hex Shank Adapter also included to fit them on electric drills or other machines.
  • Professional Finish and Threading – 6 sizes diamond hole saws are the best for cutting the perfect size holes through cement board, granite and porcelain tiles for faucet mount, garbage disposal button, soap dispenser, filtered water and other projects.
  • How to cut perfect holes? - Start at an angle, around 45 degrees, cut at a low to medium rpm, cool the cutting area with water, use a sponge to control the amount of water.
  • wash the bits right after to avoid building up with material. Please contact support if you need anything.
Check Stock

Alltope 90/105 Degree Right Angle Drill, 5 PCS Angle Extension Power Drill Attachment with 1/4'' Hex Impact Shank, Flexible Shaft Adapter, Magnetic Socket Angled Drill Bit Holder for Screwdrivers

  • ...g is made of plastic. The drill bit is cemented carbide, the same as the two 105° drivers, high hardness, wear resistance, heat resistance, uneasy to break. The high temperature will not damage it..
  • Wide Adaptation: Magnetic socket angled adapter can be used with electric drills, rechargeable drills, screwdrivers, and others, extending them to narrow places, screwing nuts, makes your work easier. Not recommend using wind guns with large torque..
Check Stock

DKIBBITH 1 Inch Dry Diamond Core Drill Bits, 25mm Tile Vacuum Brazed Angle Grinder Hole Saw for Porcelain Ceramic Granite Brick Concrete with 5/8-11 Thread to 3/8” Hex Shank Adapter, Black

  • 1″ Dry Diamond Core Drill Bit – Great tool to add to your collection for cutting holes for split AC units plumbing, shower/tub grab bars, shower plumbing, faucet and more projects.
  • Work with Angle Grinders and Electric Drills – Package including a 1 Inch Diamond Hole Saw with 5/8-11 female thread for most Angle Grinders, as well as an arbor to 3/8” Hex Drill Shank which can fit in Power Drills..
  • Excellent Hole Saw for Rough Materials – Fast clean cut through stucco, bricks, concrete, ceramic tile, porcelain, tabby stone, brick, mortar, granite, marble, quartz, etc. Both Dry and Wet will do, and vac will be helpful for dry drilling.
  • Sharp and Durable – Vacuum Brazed Diamond Core Bit chews through materials with ease and minimal wear.
  • stays sharp longer than other masonry hole saw bits as long as taken good care to cool sufficiently.
  • User Tips – When starting the hole, tilt the high-speed bit at a 45-degree angle to touch the surface, then slowly move the drill back upright and let the tool do the cutting, you will have minimal bit walking and create smooth.
Check Stock

Heavy Duty Extension Cord 15 Ft Wire Gray for Air Conditioner Refrigerator and Major Appliances Indoor Use Grey 3 Pronged Cord

  • Duty vinyl Insulation The cord suitable for both indoor and outdoor use.
  • Angle Plug Allows cord to remain flush to wall in tight spaces Extension cords are perfect for heavy duty.
  • Ideal for plugging in large appliances such as washers, dryers, or refrigerators, power tools and other major appliances, Can also be used for drills, hammer drills, circular saws, wet/dry vacs, lawn mowers, compressors, holiday lights, musical equipment, landscaping, gardening and more..
  • Grip grooves allow easy connection and disconnection of cord.
  • 1875 Watts -15 Amps/14 Gauge/3 Conductor wire - SPT-3/125 Volt. UL Listed.
Check Stock

Milwaukee 49-22-8510 Right Angle Drill Attachment Kit

  • 1/4-inch hex right-angle drill/driver attachment.
  • accepts standard 1/4-inch hex shank bits.
  • Durable all-metal housing and steel gears.
  • Only 2 inches wide for working in tight spots.
Check Stock