ReviewsPower Steering Line Kit

Mityvac MVA660 Universal Power Steering Adapter Assists in Removing Trapped Air from Automobile Power Steering Systems Cone Shaped Rubber Body for Tight Seal

  • Mityvac MVA660 Universal Power Steering Adapter is used for removing trapped air from automobile power steering systems..
  • Universal cone-shaped rubber body adapts to the varying diameters of many automotive power steering reservoirs (5/8 up to 1 5/8 inches)..
  • Fits snuggly in the neck of the reservoir to form an airtight seal when vacuum is applied.
  • Reduces bleed time following power steering repairs..
  • A handy upgrade for any Mityvac hand pump kit and a must have tool for any automotive repair shop..
Check Stock

NEW 2\ DROP SUSPENSION & WILWOOD BRAKE SET, SPINDLES, CURRIE REAR END & AXLES, POSI, 11\ DRILLED DISCS, BLACK CALIPERS, MASTER, BOOSTER, ARMS, 1968 1969 1970 1971 1972 CHEVELLE EL CAMINO CUTLASS GTO

  • Brand New Suspension and Brake Kit, with 2" Drop Spindles, for 1968-1972 GM A-Body Cars (Part # GMA6872X-K73) 003e This specific set features 2" Drop Spindles, Steering Arms, and Wilwood brakes with Drilled/Slotted Rotors and Black Calipers.
  • Includes: | Currie 9-Plus Notch-Back Rear End with 31 Spline Axles (Currie # CE-GMA6872X) | Southwest Speed 9" Ford Rear End Third Member with Posi Trac-Loc (SWS Part # 603-2078) | Southwest Speed 2" Drop Spindles (SWS Part # 103-9776) | Southwest Speed Steering Arms (SWS Part # 101-9652).
  • Wilwood Disc Brake Kit with Drilled Rotors and Black Calipers (Wilwood Part # 140-10996-D Front and # 140-140-11389-D Rear) | *** These Brake kits require at least 15" diameter wheels ***.
  • Front Brake Kit includes 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors 003e Forged Dynalite 4 Piston Calipers - Black 003e Caliper Mounting Brackets 003e BP-10 Brake Pads 003e Hubs, Bearings, Seals 003e All hardware to install | Rear Brake Kit includes: 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 003e Low-Profile Dynapro 4 Piston Calipers - Black 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Brake Pads 003e All hardware to install.
Check Stock

Small Block Chevy Serpentine System for 283 302 305 350 400 Engines- Power Steering and Alternator

  • Black Anodized Billet Aluminum Pulleys and Brackets CNC machined in the USA backed by our industry leading lifetime warranty!.
  • Works on 283 302 305 327 350 400 Engines With Long Water Pump.
  • Requires a Saginaw Power Steering Pump with Keyway Shaft and GM Alternator.
  • Kit Includes water pump pulley, alternator bracket, alternator fan, alternator pulley and cap, crank pulley, and power steering bracket with pulley. Alternator, Water Pump, and Power Steering Pump NOT included.
  • Don't settle for a cheaply made bracket that will flex during acceleration. Give your engine the strong American Made bracket that it deserves!.
Check Stock

Ridgid 59747 Base, Bottom Cover 1822I

  • 2 Speed, free spooling, submersible, and corrosion resistant with 100% continuous duty cycle.
  • Stainless steel tie bars and fasteners Integrated Solenoid valve.
  • 2020: Includes 100’ of 3/8" steel cable, 12,000 pounds of pulling capacity and an illuminated joystick remote control.
  • Requires a 35-Series valve adapter kit to adapt to the vehicle’s power steering pump..
  • Utilizing the vehicle’s power steering system as its power source ensures the HI12000 will run continuously without draining the battery.
Check Stock

MR HELLO 15" Inch Classic Wood Grain Grip Steering Wheel 3 Spoke Riveted 380mm 6 Bolt with Horn Button (long hole)

  • Classic Nostalgia Style 15 inch Wooden Steering Wheel,Made of Hardwood Walnut ..
  • 3 Spoke Riveted Let this Classic Grant Steering Wheel more in line with your Car Atmosphere..
  • This 6 Hole Bolt Steering Wheel Made of Chrome Craft,It is like a mirror, beautiful and atmospheric..
  • Diamater: 380mm (15 inches) Dish Depth: 48mm (1.89 inch)..
  • If you don't have boss kit,can't install this steering wheel,If you have any question about our product,please contact us right away.
Check Stock

SuperATV UTV EZ-STEER Power Steering Kit for Kawasaki Mule Pro DX / DXT / FX / FXT / FXT Ranch / FXR (See Fitment)- Reduces Steering Effort | Eliminates Bump Steer | Watertight & Compact Control Box

  • 【Fit】2016+ Kawasaki Mule Pro DX / 2016+ Kawasaki Mule Pro DXT / 2016+ Kawasaki Mule Pro FX / 2015+ Kawasaki Mule Pro FXT / 2018+ Kawasaki Mule Pro FXR / 2016+ Kawasaki Mule Pro FXT Ranch Edition | NOTE: Does NOT fit models with tilt steering..
  • 【EZ-STEER】Our EZ-STEER UTV power steering kit drastically reduces steering effort allowing for longer more enjoyable rides. Along with enhanced steering, power steering also will virtually eliminate bump steer and wheel jerk to provide a smooth and consistent ride..
  • 【100% Watertight】EZ-STEER has a sealed input and output shaft as well as a unique injection molded control box seal guaranteeing a 100% watertight kit. What does this mean for you? Submerge, pressure wash, or hose- our sealed circuit board is guaranteed to keep the mud out and you going..
  • 【Compact】Compact control box for easier mounting and installation..
  • 【Install】No soldering required for the wiring. Scan included QR code for instructions or visit the manufacturer's website to view instruct....
Check Stock

Speedway Motors Universal 1964-72 GM Power Steering Hose Kits

  • Power steering hose assemblies are an inexpensive alternative to the more costly stainless steel braided hose kits.
  • Return hose will normally need to be cut to length.
  • High Pressure Line: 24" long, Inverted flare fittings, one 5/8"-18 and one 11/16"-18.
  • Return Hose: 25" long, 5/8"-18 inverted flare fitting.
  • 1964-72 GM Power Steering Hose Kits help complete your project.
Check Stock

Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set, Replace Vehicle Steering Pump, Car Repair Tools, Storage Case - 648605

  • Made to be the most reliable tools in the market today.
  • Tool set for removal and installation of power steering pump and alternator pulleys.
  • For use on most power steering pump pulleys.
  • Includes special installer adapters, puller assembly with thrust bearing, jaw and sleeve.
  • Kit 20 includes 14-Piece for removal and installation of the power steering pump and alternator pulleys.
Check Stock

SuperATV UTV EZ-STEER Power Steering Kit for 2014+ Yamaha Viking / 2015+ Yamaha Viking VI - Reduces Steering Effort | Eliminates Bump Steer | Eases Jerk | Watertight & Compact Control Box

  • 【Fit】2014+ Yamaha Viking / 2015+ Yamaha Viking VI | NOTE: Does NOT fit with machines equipped with factory power steering..
  • 【EZ-STEER】Our EZ-STEER UTV power steering kit drastically reduces steering effort allowing for longer more enjoyable rides. Along with enhanced....
  • 【100% Watertight】EZ-STEER has a sealed input and output shaft as well as a unique injection molded control box seal guaranteeing a 100% watertight....
  • 【Compact】Compact control box for easier mounting and installation..
Check Stock

Power Steering Pump W/Bracket & Chrome Pulley, Chrome Saginaw Style, Compatible with Chevy SBC

  • Kit includes: (1) New Chrome Saginaw "Key-Way" Power Steering Pump, (1) Chrome Steel Pump Bracket Kit, (1) Chrome Groove Pump Pulley(5-3/4" diameter), (1) Chrome Power Steering Pump Cap.
  • 1975 and later vehicles will require a new hose to go from a metric o-ring style to the 5/8" Inverted flare.
  • A different bracket must be used if your alternator is mounted over the exhaust manifold towards the outside of the head..
  • A 3 groove crank pulley may be required for use with short water pumps.
  • Female 5/8"-18 inverted flare fitting for the high pressure outlet.
Check Stock

ICT Billet Corvette LS Alternator & Power Steering Pump Bracket Accessory Kit Turbo LS1 551521X-1

  • Made In Wichita, Kansas From Aerospace Grade, USA Billet Aluminum.
  • This Kit Requires The Use Of A Corvette Or (CTSV/G8/SS) Crank Pulley (12560115) ICT Billet (BAL100).
  • Compatible With Chevy Corvette G8 SS CTS-V Z06 LS1 LS2 LS3 LS6 LS7 L77 5.7L 6.0L 6.2L 7.0L Gen III IV (1997-2013) Series Engines.
  • Included in the package is the alternator, & power steering bracket, 1 smooth pulley, and all required mounting hardware..
  • This Kit Will Place The Alternator & Power Steering Pump In The Factory Corvette Location..
Check Stock