ReviewsPower Thermistor

STANDARD IGN PARTS Engine Control Module Wiring Relay RY-412

  • Communicates the engine coolant temperature to the ECM to ensure proper air/fuel ratio, cooling fan and temperature gauge operation.
  • Thermistor placement within the housing matches original design to ensure proper output.
  • Proper thermal conductive grease to provide accurate temperature transfer to the thermistor.
  • Causes for replacement: check engine light, no/erratic gauge operation, no/erratic cooling fan operation, engine overheating.
  • Causes for replacement: rough idle, engine hesitation, poor fuel economy, failed emissions test.
Check Stock

10Pcs Car Temperature Gauge Kit-Coolant Temperature Gauge - Digital Temperature Gauge 2inch 52mm Universal Car Truck LED Water Meter Instrument Tool

  • ... degrees Celsius. High sensitivity, easy and convenient to use. - reloj temperatura fae.
  • ❃Application: The water temperature meter is used to measure the water temperature of a car. The number and indicator can clearly show the water temperature. - coolant temp gauge.
  • ❃Principle: The water temperature sensor is a thermistor sensor. Screwed to the engine cooling water channel. The thermistor determines the amount of current flowing through the coil of the water temperature gauge. To guide the meter hands - coolant temp gauge.
  • ❃ High quality: The water temperature gauge is made of ABS, sturdy and durable.ABS has excellent complete physical and mechanical properties and good low temperature impact proof. Dimensional stability. Electrical properties, wear proof, chemical proof, dyeing, finished product processing and mechanical processing are better. - car temperature gauge kit.
  • ❃Easy to read in the dark: The blue light on the dial makes it easy to read in the dark. Its measurement range is 40-120 degrees Celsius. High sensitivity, easy and convenient to use. - reloj temperatura fae.
  • ❃Application: The water temperature meter is used to measure the water temperature of a car. The number and indicator can clearly show the water temperature. - coolant ....
Check Stock

240597203 Refrigerator Thermistor Temperature Sensor AP4032998 1258948 240597202 AH1765215 EA1765215 PS1765215 240597203 240597201

  • Applicable Refrigerator Models: AP4032998 1258948 240597202 7240597203 AH1765215 EA1765215 PS1765215 240597203 240597201.
  • Product Use: This refrigerator temperature sensor used to adjust the internal temperature of the refrigerator, so that your refrigerator can be at a....
  • High Quality: This refrigerator internal thermistor replacement element is new high quality replacement part for more stable and excellent work and....
  • The Package Includes: 1PCS temperature sensor, NOTE: This refrigerator temperature sensor is suitable for specific models of French door....
  • Service:We provide friendly service, if you have any questions about the Thermistor Temperature Sensor for Refrigerator, please feel free to contact....
Check Stock

TRONXY Original Extruder Assembled MK8 Hotend Kit for 3D Printer with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle，Bowden Extruder kit

  • 100% TRONXY Orginal MK8 Full Set Hotend Kit.
  • Suitable For TRONXY XY-3 Seriers 3D Printer.
  • Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon).
  • MK8 Extruder Hot End Kit With thermistor 100K and Heater 24V 50W.
  • Thermistor and heater cable length: 1.2 m ,Feed tube:50cm.
Check Stock

Wholesale Sensors Replacement for Whirlpool 2188819 Thermistor 12 Month Warranty

  • The NTC thermistors Value: 1K ohm, 2K ohm, 5K ohm, 10K ohm,20K ohm, 50K ohm, 100K ohm, 200K ohm, 500K ohm, 1M ohm.
  • Characteristic: Small size and large power,large B value with wide range of operating temperature..
  • Easy to Sort: Each model has a small bag and a mark. Box also has a marked model for easy identification..
  • Easy to store: Provide a high-quality box for easy management and storage..
  • More values: Provide 10 commonly used NTC Thermistor Resistors values to help you more convenient for related equipment with temperature measurement and controls thermal protection circuits in various family appliances.
Check Stock

Wholesale Sensors Replacement for Norcold 618548 Thermistor Assembly 12 Month Warranty

  • The NTC thermistors Value: 3D-25,5D-7,5D-9,5D-11,5D-15,8D-9,10D-9,10D-11,20D-9,47D-15.
  • Characteristic: Small size and large power，large B value with wide range of operating temperature..
  • Easy to Sort: Each model has a small bag and a mark. Box also has a marked model for easy identification..
  • Easy to store: Provide a high-quality box for easy management and storage..
  • More values: Provide 10 commonly used NTC Thermistor Resistors values to help you more convenient for controlling the inrush current of motor, heaters, bulb voltage stabilizer, electronic energy-saving lamp, etc..
Check Stock

Ender 3 Hotend 3D Printer Extruder Assembled MK8 Hot End Kit for Ender 3/Ender 3 Pro with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle

  • 100% Creality 3D original and high quality 3D printer accessories.
  • Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro 3d printer.
  • Tip of the nozzle, Aluminum Heating block, Throat Pipe (Built-in Teflon).
  • MK8 extruder hot end kit with thermistor and heater,24V 40W.
Check Stock

Digital Multimeter, NCV Contactless Multi Tester, Battery Tester, Auto-Ranging Tests, Current, Voltage, Resistance, Continuity, Diode, Frequency, Overload Protection, LED Light, 2 Test Leads

  • ▲Large Backlit Display : With 2.2 inch large backlight display and flashlight, convenient for you to work in dark places.
  • Rubber cover (removable) protects multimeter from drops, wear-resistant, anti-static and non-slip.
  • ▲Overload Protection : Ammeter is equipped with two fuses and a PTC thermistor to prevent damage to the circuit.
  • ▲Automatic Sleep : The instrument will automatically sleep after 15 minutes of inactivity to extend battery life.
  • ▲Auto-Ranging Measures : Automatic range selection, 2/3 readings per second, 2000 effective counts.
  • ▲Data Retention : When the measurement reading is unstable, press the HOLD button to fix the reading, and the data hold button is convenient for reading and recording.
  • ▲Overload Protection : There are two fuses on the internal circuit board of the instrument,two PTC thermistor protection circuits to prevent circuit damage due to wrong measurement.
  • ▲Package Content : 1 x Digital Multimeter, 2 x Test Leads, 3 x AAA Batteries, 1 x User Manual.
  • ▲24-Month Warranty : We provide 24 months unconditional warranty and lifetime after-sales service.
Check Stock

Oxford - Heaterz EVO - Touring Heated Grips (Temperature controlled Motorcycle Grips)

  • Built-in Thermistor technology auto-regulates temperature.
  • Precise temperature control - choose from 5 temperature settings ranging from 35°C to 45°C. (95°F-113°F) LED lights indicate temperature setting.
  • Intelligent heat setting memory - stores previous heat setting and defaults to this at power-up, saving time when in regular use. Note: Function is available when heat controller is connected to ignition.
  • Battery saving mode - protects against flat batteries, so if you forget to turn the switch off it will do it for you.
  • Simple installation - HotGrips are designed as a replacement for the handlebar grips already fitted to the motorcycle/ATV. See installation video.
Check Stock

Sikawai W10383615 Refrigerator Thermistor with Clip Compatible with Whirlpool Refrigerator Replaces WPW10383615VP 2118226 AP6020675-2 Pack

  • ✔️【Product Info.】- Refrigerator Thermistor W10383615 is also known as a temperature sensor, senses the temperature inside the refrigerator and....
  • ✔️【Suitable Brands】- Compatible with Whirlpool, May-tag, Amana, Kitchen-Aid and more Refrigerator.
  • ✔️【Replaces No.】- The W10383615 Refrigerator Thermistor Replaces AP6020675, W10383615, WPW10383615, WPW10383615VP, 2118226, PS11753994,....
  • ✔️【Repair Symptoms 】- Frost buildup, fridge section is too warm, fridge section is too cold, the freezer section is too warm, the freezer....
  • ✔️【100% Money-Back Guarantee】- For any reason, you are not satisfied, you can request a replacement or a full refund. Sikawai strives to....
Check Stock

Ewigkeit MK8 Hotend Ender 3 and Pro Assembled Extruder with Aluminum Heating Block 0.4mm Nozzle(24V 40W)

  • Ender 3 hot end with 100% original and high quality accessories for Creality 3D printer.
  • Ender3 pro Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heater cartridge is 24V 40W.
  • Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
Check Stock