ReviewsPower Tool Bearings

9\\\ Angle Grinder

...e engineered to prevent metal shards from entering motor especially when used in close proximity to other grinders.
""Tool-less"" wheel cover allows for easy guard adjustment with no need for tools to multiple grinding and cutting angles.
Labyrinth construction minimizes dust and debris penetration into the motor and bearings for longer tool life.
AC/DC switch for use with alternative power source.
Lower vibration rear and side handles includes soft grip for more comfort and control.
Externally accessible brushes for easy serviceability.
Large rubber tool rest to help protect tool and surfaces from damage.
Rugged all metal gear housing for added protection.
Protective zig-zag varnish seals the armature from dust and debris for longer tool life.
Ideal for welders, stone finishers, masons, fabricators and more.

Check Stock

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
Press bearings and races into an open hub wheel assembly on most European and American cars.
Some tools in the kit are disk brake specific, such as the caliper piston retractor.
If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
EASY STORAGE: No longer will you need to worry about y....

Check Stock

Dadywheels 52mm 99A Skateboard Wheels with ABEC-9 Bearings, spacers and a Skate Tool (Set of 4) White

Wheels' Diameter: 52mm, Small, slower wheels.
stable for trick riding and smaller riders skating street, skate parks, and bowls..
Wheels' Durometer: 99a, nice speed and grip-- an all-around good wheel. Great for beginners skating street, skate parks, ramps, pools, and other smooth surfaces..
Wheels' Material: They are made of polyurethane. Built to last and work well on different surfaces !.
Easy to assemble: Wheels ,bearings and spacers are all prebuilt. What you do is to assemble wheels on trucks by using tool, washers and nuts included in package.Save you time !.
Pack Contains: 4 pcs wheels, 8pcs ABEC-9 bearings.
8 pcs speed rings and 4 pcs wheels nuts. The bearings that come with are preinstalled which saves a ton of time. 608 bearings measure 22mm (diameter) x 8mm (inner diameter) x 7mm (width)..

Check Stock

Bearing Snatcher Bearing Tool 608 Disassembly Tool & ABEC-9 Bearings 16, Roller Skating Skateboard Accessories…

Material: made of high-quality metal spray paint, not easy to damage, not easy to corrosion, very durable, a good partner for skateboarding..
How to use: Just slide the tool into the center of the bearing and apply a little pressure on the bearing, you can use the tool to remove and replace the 8mm bearing.
It can be used to remove and install 608 wheel bearings of roller skates, it can also only be used for 608 bearings and can be used for roller skates, driftboards .......
Advantages of our bearings ：Our 608 bearings are made of high carbon steel. The ball of the bearing has a problem, it can prevent you and sand from entering and affecting the performance of the bearing. Make your product more outstanding, more handsome and more eye-catching..
The most important thing: we support no-excuse returns, we also have more price advantages than others, so you spend less money and have more fun..

Check Stock

608 2RS Bearings Chrome Steel for Roller Inline Skate Wheel Skateboard Roller Blades Scooter 3D Print Filament Spool Holders Rollerblades Micro Rotary trolling Fan Motor (2 Pack, 2)

✅【Pre-lubricated Neat and tidy】Lubricated with a few grease at manufacture to protect them during shipping, but look clean. Wash them with dish soap water, when you still feel somewhat gummy or sticky. Bearings come with a few sticky lube that may hinders their ability to roll or spin. If conditions permit, clean and wipe off outside grease with paper towels and WD - 40 (degreaser or cleaning agent), make bearings spin more freely with a quick cleaning and re lubrication..
✅【Optimal Material Durable Unique Packaging】To ensure reliability andmech longer ages, bearings are made of High-Quality Supreme chrome steel AISI 52100 which is more durable and better than carbon steell, much durable not only strength but also with dual shields for optimum lubrication and reduction of contaminants. Bearings are stacked in specially rectangular transparent box, which are handy for storing and organizing and counting until you need them,take out bearings much easier..
✅【Widely Used In Light Duty Applications or Replacement】Suitable for skateboards, roller inline skates, roller blades, scooters, Bandsaw shark wheels, 3d printing filament spool holders roller guides, fidget spinner,repair fan motor small micro rotary trolling motor, wall mounted air c....

Check Stock

Funmit W10435302 Washer Bearing and Tub Seal Kit & W10447783 Bearing Installation Tool Replacement for Whirlpool Cabrio Washer Replaces AP5325033 2118925 AH3503261 EA3503261 PS3503261 AP5325072

✅【COST-EFFECTIVE GOODS】- Our W10435302 & W10447783 bearings installation tool kit contains all the required replacement parts to complete the....
✅【WIDE APPLICATION】- W10435302 & W10447783 washer bearings installation tool kit is perfectly compatible with Whirlpool, Kenmore, and Maytag....
✅【FIX SITUATION】- W10435302 & W10447783 bearings installation tool kit helps you solve the following problems effectively: ①Noisy ②Leaking....
✅【PREMIUM QUALITY & EASY INSTALLATION】- Our cabrio washer bearing kit is made from high-quality material well-tested by the manufacturer and....
✅【SHOP WITH CONFIDENCE】- Funmit adhere to provide all customers with a simple, streamlined shopping experience of large appliance replacement....

Check Stock

Makita GA4030 4-Inch Angle Grinder,Blue

Powerful 6.0 AMP motor delivers 11,000 RPM for the most demanding applications.
Compact design at only 3.7 lbs. for reduced operator fatigue.
Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life.

Check Stock

VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating

... hammer (not included) to the puller and slide hammer back and forth until the bearing comes out.
The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage.
Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set – Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle.
These tools make the job simple and prevent damage to your bearings when pulling.
Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings.
For removal only, not intended for installation.
FITS YOUR CAR: Standard SAE sizes work for most American domestic makes and models.
Set includes the following sizes to fit main bearing tube – 1 inch to 1-7/8 inches, 1-5/16 inches to 2-3/8 inches, and 1-3/8 inches to 2-7/8 inches.
Sizes permanently laser-etched on tool for easy identification.
Each tool fits a basic slide hammer with a 5/8-inch x 18 thread pitch.
EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
PACKAGE CONTENTS: Package includes (3) rear axle bearing removers and (1) carrying case for your convenience.

Check Stock

Thur amo 2 Jaw Bearing Puller, Adjustable Two Claw Pilot Remover Hand Repair Tool Carbon Steel Pump Pulley Remover Straight Type for Motorcycle Car Auto (3in - 38x65mm)

【Adjustable Design】 The puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings.
【Carbon Steel Material & Foring Process】 The bearing gear puller is made by carbon steel, and the tip of the mandrel undergoes a special heat treatment process to make it more solid and durable.
【Reinforcement Equipment】 The bearing gear puller comes with hexagonal screw and thread, will not slip, used for tightening, high strength.
【Professional Repair Tools】 This removal tool is particular for slide gears, pulley, and flywheel, making removal simple and without any damage. Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
【Wide Application】 Suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, pump bearing, generator bearing, machine bearing and so on.

Check Stock

Metabo - 9' Angle Grinder - 6, 600 Rpm - 15.0 Amp w/Brake, Non-Lock Paddle, Electronics (606479420 24-230 MVT), Professional Angle Grinders

Powerful 15.0 AMP motor delivers 6,600 RPM for faster material removal.
Rotatable rear handle rotates with just the push of a button, with positive stops every 90 degrees, to suit most cutting and grinding operations.
Wire mesh intake covers are engineered to prevent metal shards from entering motor especially when used in close proximity to other grinders.
""Tool-less"" wheel cover allows for easy guard adjustment with no need for tools to multiple grinding and cutting angles.
Labyrinth construction minimizes dust and debris penetration into the motor and bearings for longer tool life.
AC/DC switch for use with alternative power source.
Lower vibration rear and side handles includes soft grip for more comfort and control.
Externally accessible brushes for easy serviceability.
Large rubber tool rest to help protect tool and surfaces from damage.
Rugged all metal gear housing for added protection.

Check Stock

Tonmp 50 PCS 608-2RS Ball Bearing – Double Rubber Sealed Shielded Miniature Deep Groove Bearings for Furniture Wheel,Skateboards, Inline Skates, Scooters, Roller Blade Skates (8 x 22 x 7mm)

✅【Pre-lubricated Neat and tidy】Lubricated with a few grease at manufacture to protect them during shipping, but look clean. Wash them with dish soap water, when you still feel somewhat gummy or sticky. Bearings come with a few sticky lube that may hinders their ability to roll or spin. If conditions permit, clean and wipe off outside grease with paper towels and WD – 40 (degreaser or cleaning agent), make bearings spin more freely with a quick cleaning and re lubrication..
✅【Optimal Material Durable Unique Packaging】To ensure reliability andmech longer ages, bearings are made of High-Quality Supreme chrome steel AISI 52100 which is more durable and better than carbon steell, much durable not only strength but also with dual shields for optimum lubrication and reduction of contaminants. Bearings are stacked in specially rectangular transparent box, which are handy for storing and organizing and counting until you need them,take out bearings much easier..
✅【Widely Used In Light Duty Applications or Replacement】Suitable for skateboards, roller inline skates, roller blades, scooters, Bandsaw shark wheels, 3d printing filament spool holders roller guides, fidget spinner,repair fan motor small micro rotary trolling motor, wall mounted air....

Check Stock