ReviewsPower Transmission V Belt

22-560 22-563 22-565 22-580 TP400LS 6560 Drive Belt Compatible with Delta & WEN Planer 1Pcs

  • Compatible with Delta TP400LS 22-560 22-563 22-565 22-580 Planer.
  • Multi wedge belt, also known as multi groove belt, the transmission shaft of the machine using this belt can be adjusted, so the length of the belt is plus or minus 0.19 inches, which will not affect the use under normal conditions. If you have any questions before or after purchase, please contact me in time.
  • Precautions for belt use: 1. The belt and pulley shall be kept clean and shall not be stained with oil and water.
  • 2. When installing the belt, check: A. whether the transmission shaft and the transmission wheel are vertical, B. whether the transmission shafts are parallel, and C. whether the transmission wheel is in the same plane.
  • 3. Extreme cold and heat will destroy the chemical structure of the belt.
  • 4. When the machine is running, try to keep it horizontal..
Check Stock

ZRM&E 5PCS 20 Teeth 5mm GT2 Timing Belt Pulley for Width 6mm 3D Printer Parts Accessory

  • Type: 5pcs GT2 Timing Belt Pulley, Come with 1 hex wrench, and matched M4 fastening screw, which has been already screwed in the pulley..
  • High Quality: Adopt high quality aluminum, excellently machined, finished smoothly, durable to use, perfect choice for 3D printer or similar projects..
  • Specification: 20 teeth, 5mm inner bore, 16mm height, fit for 6mm width GT2 timing belt and 5mm shaft stepper motor..
  • Special Design: Rounded teeth can engage with belt longer, flange design admits synchronizing shaft rotations, provides a smoother and high power transmission..
  • Application: Widely used in milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions..
Check Stock

Amprobe AM-250 Industrial Digital Multimeter

  • Verify presence of voltage from 30 V AC to 122, 000 V AC (122 kV) in transmission lines, power distribution equipment, down power lines, fuses and load break connectors.
  • Push button self-test verifies that tester is working properly.
  • Includes Hot Stick TIC 410A for voltages higher than 1500 V AC.
Check Stock

StarknightMT Drive Belt,3211077 20G4022 CVT ATV Carbon Belt Compatible with Polaris Sportsman 400 500 Ranger 500 Scrambler Magnum Xplorer 4x4 ATV UTV ,Replacement for 3211072, 3211048

  • ✬【FITMENT】The drive belt is designed for ATVs, UTVs or other powersport equipment .It is compatible with Polaris Ranger 400 500.
  • Sportsman 335 400 450 500 .Also the 20G4022 belt is a perfect replacement for 3211072, 3211048..
  • ✬【NO SLIPPERY】Nylon fiber increases the friction between the drive belt and sheaves, and improves its transmission efficiency, which is not easy to slip, and can strengthen the service life of the ranger drive belt and pulley ,also give it way more power to drive..
  • ✬【STRONG HEAT DISSIPATION 】It was shown through tests that high strength chloroprene rubber of our ranger belt is with good resistance to grease, heat and aging,providing you a safe and comfort driving or racing experience..
  • ✬【DURABILITY& DEPENDABILITY】Aramid string cord ensures good flex resistance and low elongation, the 3211077 drive belt is not easy to break or shatter..
  • ✬【FOUR LAYER DESIGN】:①The 3211077 drive belt was wrapped with high wear-resistant nylon fabric on both tooth surface ,which make less noise and improve transmission efficiency②Mid layer is high strength chloroprene rubber ③aramid string cord plus more another layer rubber will prevent rapid breakage of the ATV UTV Belt..
Check Stock

Godox V860II-S High-Speed Sync GN60 1/8000 2.4G TTL Li-ion Battery Camera Flash Speedlite Light Compatible for Sony Camera & USB LED

  • Godox V860II-S Flash Speedlite is Fully support TTL functions, support for TTL auto flash, manual flash, 1/8000 high-speed sync, flash exposure compensation, flash exposure lock, second curtain sync, modeling flash, etc.
  • 2000mAh Li-ion Battery, Max. 1.5s recycle time & 650 full power pops. User-friendly LCD display and control panel with firmware upgrade..
  • GN60 High Guide Number and 22 Steps of Power Output (1/1-1/128). Auto/Manual Zoom Head from 20 to 200mm.Auto zoom (Flash coverage set automatically to match the lens focal length and image size) and Manual zoom.
  • Godox V860II-S Speedlite as a master Speedlite unit to control Sony camera flashes, e.g. HVL-F60M, HVL-F43M and HVL-F32M via wireless.
  • as a slave Speedlite unit under control of Sony camera flashes, e.g. HVL-F60M, HVL-F43M and HVL-F32M..
  • Godox V860II-S Speedlite Adopts Godox wireless X system, build-in 2.4G wireless transmission offers all-in-one functions and 100 meters further transmission distance,Optical transmission with even illumination and stable output.Godox V860II-S High-Speed Speedlite is Compatible for Sony cameras (TTL autoflash).
Check Stock

Bosch GSR12V-300N 12V Max EC Brushless 3/8 In. Drill/Driver (Bare Tool)

  • Efficient drill/driver design provides Pro torque in a 3/8 in. Drill/driver At only 1. 6 lbs. (Tool only, not including battery).
  • Eco Brushless motor delivers 300 in. -Lbs. Of torque and a max speed of 1, 750 RPM for outstanding performance.
  • Compact housing features a head length of only 6. 0 in. And a weight of only 1. 6 lbs. (Tool only, not including battery).
  • Two-speed transmission provides a high-power setting at 0-460 RPM and a high-speed setting at 1, 750 RPM.
  • Precision 20+1 clutch settings allows for accurate torque settings for less fastener damage.
  • Included Components: (1) Gsr12V-300 12V Max Ec Brushless 3/8 In. Drill/Driver.
Check Stock

VONETS 2.4GHz WiFi Module/Mini Router/WiFi to Ethernet Bridge/Hotspot Signal Repeater/Extender/Amplifier/AP, USB/DC Powered with 2 RJ45 Ports for DIY Industrial Engineering Network Device VM300-H

  • the suggestion is: this device cannot use the USB or DC directly plugged into the computer for power supply, it needs to be powered by an independent standard 5V/1A power supply..
  • 【Support two kinds of application methods】: Router mode.
  • WiFi Bridge ( IP layer or MAC layer transparent transmission).
  • WiFi Repeater (WiFi signal repeater), can extend WiFi transmission distance.
  • 【WiFi hotspot automatic reconnection】two hotspot matching methods: Full match authentication mode, SSID and password authentication mode, Support SSA signal strength detection reporting function, motion detection function and memory hotspot(Up to 100) automatic matching connection function, realize to WiFi motion applications.
  • Hotspot connection parameter support import and export function.
  • 【Point-to-point transmission distance】: maximum can be up to 100 meters when without obstacle and small data, less than 50 meters when used for video transmission.
  • Good Partner for Monitoring, DVR, IP camera, Medical devices, IoT devices, Video transmission, Industrial PLC, PS3, Network Printer, Robot, Doll Machine and more DIY Network application.WiFi Tx Power:14.5dBm/16dBm optional, 2x3dBi(2.4GHz) external antennas.
Check Stock

Aqua Lung Shot FX Spring Strap Diving Fin

  • The Power Zone, located in front of the foot pocket, where the power bands used to be, continues to evolve. What were once powerbands, are now integrated "V Boosters", providing even more power with less effort..
  • A new spring strap offers a soft TPR heel pad along with Aqua Lung's own proprietary buckles..
  • The foot pocket is equipped with the "Power Transmission Zone". This anchors the foot preventing unnecessary stretching of the foot pocket on the power stroke resulting in maximum energy transmission..
  • The blade contains a high performance elastomer resulting in high efficiency.
  • An elastic blade insert creates a "spoon effect" that pushes more water with each down stroke adding to efficiency..
Check Stock

Huanyu Mini Belt Sander 360W Electric Polishing Grinding Belt Machine 1.2\ x 21\ Micro Knife Sharpener DIY Bench Sanding Machine with 9 Belts for Metal Wood Aluminum Adjustable Speed

  • [795 high-power DC motor & dust cover] pure copper wire, front and rear bearings, quiet work, 360W strong power, durable. The motor cover is customized to prevent dust and reduce the impact of dust on the performance of the sander during work..
  • [Automatic deviation correction & speedless speed regulation] The main wheel rib design avoids the belt deviation.
  • the motor is separately provided at 12000rpm under 24V, and the load working rotation is still high-speed rotation at 0-4800rpm. Suitable for grinding high-speed steel, stainless steel, iron, soft metals, wood, plastics, etc..
  • [Belt size] 9 belts with different Grit(the larger the number, the smoother the polishing).
  • the size is 1.2" x 21" (30MM*533MM). If the crafts are small, the narrow belt will be more convenient. We also have 0.8” x 21” (20MM*533MM) abrasive belt for you to choose..
  • [High-speed driving wheel] The driving wheel is made of aluminum alloy.
  • the three auxiliary wheels are all made of NSK bearings, working quietly, and basically only the sound of belt rotation can be heard..
  • [24V-360W-15A DC motor power supply] High-durability aluminum housing, equipped with intelligent temperature fan, fast cooling.
  • built-in switch to make 110/220V optional.
  • *[Be sure to select the correct voltage....
Check Stock

Milling Bronze Gear,Power Feed Bronze Gear Bridgeport for Bridgeport Milling Machine

  • ...e or a skilled operator, it is very easy to install this power feed according to the instruction and online video or by yourself.After-sales:You will get worry-free 18-month warranty and lifelong technical guidance..
  • 【STABLE AND EFFICIENT】This power feed adopts Gleason Spiral Bevel Gear with advantages of stable transmission ratio,low transmission noise,high transmission efficiency and high bearing capacity.And when fast transmission, if the tool collides with the workpiece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage..
  • 【AUTOMATIC AND MANUAL CONTROL】You can set this power feed to work at automatic constant speed to free your hands or work by manually adjusting the speed control knob to do more precise milling work.And this multifunctional milling machine power feed can work with excellent speed control in the entire range according to your needs..
  • 【WIDE APPLICATION】This milling table power feed fits some vertical knee type mills with the same mounting pattern and a 5/8" diameter shaft on the end,But it will NOT fit mills with a different mounting pattern or different sized leadscrews like powermatic and some other odd sized machines, so please make sure yours i....
Check Stock

D&D PowerDrive 920-8M-20 Timing Belt, Rubber

  • This kind of closed loop rubber timing belt has has strong anti-wear, good for power transmission, great for 3D printers and linear motion applications..
  • Recommended for use with timing pulleys for increased load capacity and improved registration.
Check Stock