ReviewsPower Wheels Grey Battery

Power Wheels 12-Volt Rechargeable Battery

  • Keep young drivers zooming with this extra 12-V battery, compatible with any Power Wheels vehicle that requires a 12-V, 12-Ah battery.
  • Battery charger not included. Please use the charger that was included with your Power Wheels vehicle to charge this battery.
  • Prevent premature battery failure! Fully charge battery before storage and at least once per month.
  • Before first time use, you must charge the battery at least 18 hours (but no more than 30 hours). Always recharge for at least 14 hours (but no more....
Check Stock

LiFePO4 Battery, Lithium Battery 4000+ Cycles Rechargeable Iron Phosphate Battery for RV, Solar Power and Backup Battery Low Self-Discharge and Light Weight with Built-in BMS

  • 【PERFECT REPLACEMENT】: 100% compatible with all Power Wheels 12-Volt using the Gray Battery (NOT Compatible with Orange Top Battery). Connector will fit perfectly in Power Wheels charger and Power Wheels vehicle. 12V 6ah lifepo4 lithium battery is perfect replacement for original Fisher-Price battery..
  • 【100% SAFE】: With internal, self-resetting fuse and user manual for safety information. Connector with Replaceable 30 AMP Fuse included. LiFePO4 battery has built-in BMS (Battery Management System) with Over voltage protection, Over discharge protection,Short circuit protection and Overheating Protection..
  • 【2,000 Cycles and Durable】: Dimension 4.5x2.59x3.8 in. Weight only 1/3 of the weight of Lead Acid Battery. Safe with no leak fluids. Environmental friendly. Pionergy LiFePO4 battery provide 4000+ cycles while the original lead acid battery last 100-300 cycles. If used daily, an SLA need to be replaced more than 6 times before LiFEPO4 needs replace. Much cheaper choice in long term use..
  • 【Efficient & Convenient】Pionergy LiFePO4 Battery can be 100% discharged while lead acid battery can only 40%-50% discharged. Charge the same time while use much longer. Also, Pionergy battery has constant power while lead acid battery has steady power dro....
Check Stock

Power Wheel Adapter with Fuse & Switch, Secure Battery Adapter for Milwaukee 18V Lithium Battery with 12 Gauge Wire, Good Power Convertor for DIY Ride On Truck, Robotics, RC Toys and Work Lights

  • Compatibility: Our battery power connector is well-made, snug fit your battery, can install and lock your battery easily. Compatible with Milwaukee M18 battery 18v series..
  • Safety Design: For your safety, Our product has some security design. The switch ensures you can turn on&off the battery easily. The fuse supply overpowers protection. The copper contact improves the conductivity and safety. Heat-resistance 12 AWG wire is suitable for high-power batteries..
  • Easy to Install: Just move the power adapter to the inside of the groove, then push the converter and ensure it had locked the battery. ( Tips: If you want to remove the adaptor from the battery, Please press down the buckle of the battery, then remove it. ), there are 4 fixing screw holes on the adapter for easy fixing with screws..
  • Multi-function: Power wheels adapter has 12.6 inches of 12 gauge wire installed.
  • Maximum permissible current 20A, You can use it to upgrade your power wheels, toys, or Robotics DIY, high power application, etc. Let your kids have nearly endless power wheels fun with a 5-second battery swap out!.
  • High quality: Made of high-quality ABS Plastic,injection-molded,excellent scratch&shock resistance and chemical resistance and is impervious to heat, moisture, and corrosio....
Check Stock

32GB 9-in-1 Linux Bootable USB for Ubuntu,Linux Mint,Mx Linux,Zorin OS,Linux Lite,ElementaryOS,Manjaro etc. | Top 9 Linux for Beginners| Try or Install | Boot Repair | multiboot USB

  • Compatibility: Our battery power connector is well-made, snug fit your battery, can install and lock your battery easily.Compatible with Milwaukee M18 battery 18v series..
  • Safety Design: For your safety, Our product has some security design. The switch ensures you can turn on&off the battery easily. The fuse supply overpowers protection. The copper contact improves the conductivity and safety. Heat-resistance 12 AWG wire is suitable for high-power batteries..
  • Easy to Install: Just move the power adapter to the inside of the groove, then push the converter and ensure it had locked the battery. ( Tips: If you want to remove the adapter from the battery, Please press down the buckle of the battery, then remove it. ), there are 4 fixing screw holes on the adapter for easy fixing with screws..
  • Multi-function: Power wheels adapter has 12.6 inches of 12 gauge wire installed.
  • Maximum permissible current 18A, You can use it to upgrade your power wheels, toys, or Robotics DIY, high power application, etc. Let your kids have nearly endless power wheels fun with a 5-second battery swap out!.
  • High quality: Made of high-quality ABS Plastic,injection-molded,excellent scratch&shock resistance and chemical resistance and is impervious to heat, moisture, and corrosi....
Check Stock

Power Wheels 6-Volt Rechargeable Replacement Battery

  • For use with a Power Wheels vehicle that requires a 6V, 9.5 Ah leadacid battery..
  • This product does not include a charger. Please use the charger that wasincluded with your Power Wheels vehicle to charge the battery..
  • Before first time use, you must charge the battery at least 18 hours(but no more than 30 hours)..
  • Always recharge for at least 14 hours (but no more than 30 hours)..
  • IMPORTANT: Prevent premature battery failure! Fully charge battery before storage..
Check Stock

Power Wheel Adapter with Fuse & Switch, Secure Battery Adapter for Greenworks 40V Lithium Battery, with 12 Gauge Wire, Good Power Convertor for DIY Ride On Truck, Robotics, RC Toys and Work Lights

  • Compatibility: Our battery power connector is well-made, snug fit your battery, can install and lock your battery easily. Compatible with Greenworks 40V series lithium-ion batteries..
  • Safety Design: For your safety, Our product has some security design. The switch ensures you can turn on&off the battery easily. The fuse supply overpowers protection. The copper contact improves the conductivity and safety. Heat-resistance 12 AWG wire is suitable for high-power batteries..
  • Easy to Install: Just move the power adapter to the inside of the groove, then push the converter and ensure it had locked the battery. ( Tips: If you want to remove the adaptor from the battery, Please press down the buckle of the battery, then remove it. ), there are 2 fixing screw holes on the adapter for easy fixing with screws..
  • Versatility: Power wheels adapter has 12.6 inches of 12 gauge wire installed.
  • Maximum permissible current 40A, You can use it to upgrade your power wheels, toys, or Robotics DIY, high power application, etc. Let your kids have nearly endless power wheels fun with a 5-second battery swap out!.
  • High-quality: Made of high-quality ABS Plastic,injection-molded, excellent scratch&shock resistance and chemical resistance and is impervious to heat, moisture, a....
Check Stock

Power Wheel Adapter with Fuse & Switch, Secure Battery Adapter for Worx 20V PowerShare Lithium Battery, with 12 Gauge Wire,Good Power Convertor for DIY Ride On Truck,Robotics,RC Toys and Work Lights

  • Compatibility: Our battery power connector is well-made, snug fit your battery, can install and lock your battery easily. Compatible with WORX 20V PowerShare series lithium-ion batteries..
  • Safety Design: For your safety, Our product has some security design. The switch ensures you can turn on&off the battery easily. The fuse supply overpowers protection. The copper contact improves the conductivity and safety. Heat-resistance 12 AWG wire is suitable for high-power batteries..
  • Easy to Install: Just move the power adapter to the inside of the groove, then push the converter and ensure it had locked the battery. ( Tips: If you want to remove the adaptor from the battery, Please press down the buckle of the battery, then remove it), there are 2 fixing screw holes on the adapter for easy fixing with screws..
  • Versatility: Power wheels adapter has 12.6 inches of 12 gauge wire installed.
  • Maximum permissible current 20A, You can use it to upgrade your power wheels, toys, or Robotics DIY, high power application, etc. Let your kids have nearly endless power wheels fun with a 5-second battery swap out!.
  • High-quality: Made of high-quality ABS Plastic, injection-molded, excellent scratch&shock resistance and chemical resistance and is impervious to heat, moisture, and....
Check Stock

Power Wheel Adapter with Fuse & Switch, Secure Battery Adapter for Dewalt 20V Lithium Battery, with 12 Gauge Wire, Good Power Convertor for DIY Ride On Truck, Robotics, RC Toys and Work Lights, 1 Pack

  • Compatibility: Our battery power connector is well-made, snug fit your battery, can install and lock your battery easily. Compatible with Dewalt 20V /18VDCB series lithium-ion batteries..
  • Safety Design: For your safety, Our product has some security design. The switch ensures you can turn on&off the battery easily. The fuse supply overpowers protection. The copper contact improves the conductivity and safety. Heat-resistance 12 AWG wire is suitable for high-power batteries..
  • Easy to Install: Just move the power adapter to the inside of the groove, then push the converter and ensure it had locked the battery. ( Tips: If you want to remove the adapter from the battery, Please press down the buckle of the battery, then remove it. ), there are 4 fixing screw holes on the adapter for easy fixing with screws..
  • Versatility: Power wheels adapter has 12.6 inches of 12 gauge wire installed.
  • Maximum permissible current 20A, You can use it to upgrade your power wheels, toys, or Robotics DIY, high power application, etc. Let your kids have nearly endless power wheels fun with a 5-second battery swap out!.
  • High quality: Made of high-quality ABS Plastic,injection-molded,excellent scratch&shock resistance and chemical resistance and is impervious to heat, moisture....
Check Stock

SANIKLITE Power Wheels Battery Adapter for Makita 18V Battery,Power Tool Battery Converter Dock Power Connector with 14 Gauge Wire, Ideal for RC Toys,Robotics and Work Lights

  • ★【Perfect Compatibility】Battery Adapter for makita battery 18V adopt Superb craftsmanship which ensure the size measured and controlled strictly, so that the battery converter compatible with 18V battery perfectly and stable lock on the battery..
  • ★【Quality Material】Power wheels battery adapter for makita comes with black & red 14 guage tinned copper wires,protects them from corrosion and making it easier to solder.Covers with teflon FEP which resists high & low temperature, water, oil, chemicals and abrasion. Morever, Battery converter constructs with premium silicone rubber insulation which will not melt when exposed to high temperatures.(Note:Max Heat Resistance temperature Within 200°C ).
  • ★【Easy To Use】Upgrade your power wheels/toys or robotics diy which is easy to use. As long as the battery is installed into the connector, it can be easily to connect the battery to your devices. Just need to move the power mount connector to the inside of the groove gently, then install the battery into the connector.Meanwhile, battery adopter has compact size and lightweight, which is convenient to carry and will not bring you any burden..
  • ★【Wide Usages】Power battery connector is compatible with most types of makita 18V lithium batteries ....
Check Stock

Power Wheel Adapter with Fuse & Switch, Secure Battery Adapter for Ridgid AEG 18V Hyper Lithium Battery, with 12 Gauge Wire,Good Power Convertor for DIY Ride On Truck,Robotics,RC Toys and Work Lights

  • Compatibility: Our battery power connector is well-made, snug fit your battery, can install and lock your battery easily. Compatible with Ridgid AEG 18V Hyper series lithium-ion batteries..
  • Safety Design: For your safety, our product has some security design. The switch ensures you can turn on&off the battery easily. The fuse supply overpowers protection. The copper contact improves the conductivity and safety. Heat-resistance 12 AWG wire is suitable for high-power batteries..
  • Easy to Install: Just move the power adapter to the inside of the groove, then push the converter and ensure it had locked the battery. ( Tips: If you want to remove the adapter from the battery, Please press down the buckle of the battery, then remove it. ), there are 2 fixing screw holes on the adapter for easy fixing with screws..
  • Versatility: Power wheels adapter has 12.6 inches of 12 gauge wire installed.
  • Maximum permissible current 18A, You can use it to upgrade your power wheels, toys, or Robotics DIY, high power application, etc. Let your kids have nearly endless power wheels fun with a 5-second battery swap out!.
  • High-quality: Made of high-quality ABS Plastic,injection-molded, excellent scratch&shock resistance and chemical resistance and is impervious to heat, moist....
Check Stock

Power Wheels Toddler 6-Volt Rechargeable Replacement Battery

  • For use with a Power Wheels Toddler vehicle that requires a 6V, 4.0 Ah lead acid battery.
  • This product does not include a charger. Please use the charger that was included with your Power Wheels vehicle to charge the battery..
  • Before first time use, you must charge the battery at least 18 hours (but no more than 30 hours)..
  • Always recharge for at least 14 hours (but no more than 30 hours)..
  • IMPORTANT: Prevent premature battery failure! Fully charge battery before storage..
Check Stock