ReviewsPp Pipe Fitting Mould

Spears 1429 Series PVC Tube Fitting Coupling Schedule 40 Gray 3/4 x 1/2 Barbed

Fitting connects to schedule 40 PE pipe on both ends.
PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.

Check Stock

SINTLY 3/8\ NPT to 6AN Flare Male AN6 Straight Fitting Union Flare Adapter Aluminum Black 2Pcs

【Tips】To obtain a proper seal in the NPT joint, you need to use a sealant compound or PTFE tape. The thread is sealed by wedging. The NPT connection cannot be reused. When accessories are reused, this can cause wear or increase the possibility of leakage..
【37 Degree Flare Fitting Taper】：The 6an male flare to 3/8" NPT fitting has one male side AN is a 37-degree flare fitting taper and the other male side NPT is a 60 degree tapered threads. These adapter hose fittings are designed to quickly make professional 37° AN connections from NPT tapered pipe threads. Designed for smooth flow that gives better fluid flow, tight security, and leaks free.
【Application】-6AN to 3/8" NPT straight flare to pipe adapter is widely used in kinds of liquids, oil, Water, Air, Fuel lines, E85, gas, etc. Bulkhead Fitting is perfect to apply in automotive, industrial, boat/marine, etc. The male flare fitting fit all oil cooler / fuel tank / fuel pump/fluid Line/turbo..
【Material ＆ Features】Made of High-Performance Lightweight 6061-T6 Billet Aluminum Material. All threads are designed for the maximum percentage of engagement. One side is AN standard and the other is NPT National Pipe Taper Thread. Each straight fitting is completed with a black anodized fini....

Check Stock

Class A Customs | T-1000-BPK| 10 Gallon Fresh Water Tank & Plumbing Kit RV Concession

10 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 19” Longest Length (not including fittings) x 9” x 14” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....

Check Stock

Class A Customs | T-2100-BPK| 21 Gallon Fresh Water Tank & Plumbing Kit RV Concession

21 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 34” Longest Length (not including fittings) x 9” x 16” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....

Check Stock

Class A Customs | T-4000-BPK| 40 Gallon Fresh Water Tank & Plumbing Kit RV Concession

40 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 39 1/2” Longest Length (not including fittings) x 13” x 18” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe....

Check Stock

Class A Customs | T-3000-BPK| 30 Gallon Fresh Water Tank & Plumbing Kit RV Concession

30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male ....

Check Stock

6 Pieces Balaclava Face Cover Sun Protection Cover Breathable Long Neck Cover for Outdoor Activities (Black, White, Coffee, Dark Blue, Navy Blue, Grey)

Protect your drainage system by using a grate on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining light water flows from small lawns, landscaped areas, walkways, and patios.
Fits 4 in. Sewer and Drain Pipe & Fittings, 4 in. Single-Wall Corrugated Pipe, 4 in. Triple-Wall Pipe. 12 GPM flow rate. 3.9 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installed—recommended for pedestrians, bicycles, and wheelchair traffic.
Place on top of drain pipe or drain fitting for a soil-tight fit. 4 in. Round Drain Grates are available in a variety of colors.
NOTE : This fixture NDS part#11 is a 4” round grate to fit 4” S & D fitting as well as Pipe in S & D as well as corrugated pipe.

Check Stock

Flange Wizard 42050-T Threaded Two Hole Pins, 1/2" - 1-7/16"

【Size Reference】Fit Pipe Diameter: 2.02 inch/51.5mm. Outer Diameter: 3.34 inch/85mm. Height: 0.51 inch/13mm..
【Reliable Material】This flange pipe cover is made of high-quality PP plastic, high heat resistance, and corrosion resistance fit many occasions. Don't worry about the pipe collar breaking when installing. The ring shape after the installation is no deformation..
【Pipe Cover Decoration Function】When the pipe passes through the wall, it leaves an unsightly surface. Can be masked with a pipe collar, to decorate making the wall and environment..
【Wide Applicatons】The water pipe cover decoration can also be used to protect ladder mounting hardware and cover gaps between the concrete and the hardware..
【Package Includes】1Pc x Pipe Cover Flange.

Check Stock

1/2\ Pipe Fitting Elbow, Home TZH DN15 Threaded Cast Black Malleable Iron for Steampunk Vintage Shelf Bracket DIY Plumbing Pipe Decor Furniture (20, 1/2\)

Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable black iron fittings are 100% tested and protected right at the factory. Home TZH pipe fitting elbow of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
Wide Application: Our pipe fittings come in 20 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. Pipe fittings elbow are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our cast iron pipe fittings work great without sacrificing functionality..
Without DIY Difficulty: These pipe fittings are threaded, just connect the threaded rods or pipes to the elbows, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will bring your house or store a Loft Retro Indust....

Check Stock

Home TZH 45-Degree-Elbow, Threaded Cast Black Malleable Iron Elbow for Steampunk Vintage Shelf Bracket DIY Plumbing Pipe Decor Furniture (10, 1/2")

Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable black iron fittings are 100% tested and protected right at the factory. Home TZH pipe fitting elbow of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
Wide Application: Our pipe fittings come in 10 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. Pipe fittings elbow are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our cast iron pipe fittings work great without sacrificing functionality..
Without DIY Difficulty: These pipe fittings are threaded, just connect the threaded rods or pipes to the elbows, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will bring your house or store a Loft Retro Indust....

Check Stock

Class A Customs | Under Mount 20 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit UM-2000-BPK

20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 13” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Th....

Check Stock