ReviewsPpr Pe Pipe Fitting

Spears 1435 Series PVC Tube Fitting, Adapter, Schedule 40, Gray, 2" Barbed x NPT Female

Adapter for connecting pipes or fittings of different types.
Fitting connects to schedule 40 PE pipe on one end and has an NPT female connector on the other.
PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.

Check Stock

Libraton PVC Pipe Cutter, Up to 1-5/8\

Premium Set: PVC cutter*1 & replacement blade*3.
Wide Application: The PVC cutter is suitable for most plastic pipes, e.g. PVC pipe, PEX pipe, PPR pipe.
Working Efficiency: This plastic cutter equipped with ratcheting drive technology and arch angle design to greatly save your strength when cut pipes.
Quick Change: You can quick change the blade replacement easily within 10 seconds without any other tools.

Check Stock

uxcell PVC Barb Hose Fitting Connector Adapter 16mm or 5/8

APPLICATION.The adapter’s barbed fitting creates a tight seal on flexible PE pipe when used with a hose clamp (sold separately)..
ADVANTAGE.An O-ring is delivered to the end of each joint thread, eliminating the need for a sealant or raw tape.
HIGH QUALITY MATERIAL. made of PVC ,have Alkali resistance, high temperature resistance, corrosion resistance, strong anti-aging, high strength, no break..
-30 degree to 100 degree F temperature range..
BARB HOSE FITTING.has a male National Pipe Thread (G) thread on one end and a barbed insert on the other.
Size: 16mm or 5/8″ Barb x 3/4″ G Male.

Check Stock

Disconnect Tongs Tool with Depth Gauge and Pipe Deburring Tool Combination Set for Push to Connect Fittings Removal Tool for Disconnect Clamp for 1/2",3/4",1" Plastic PEX CPVC Copper Pipe Fittings

【Package Includes】1 pcs disconnect tongs tool.
1 pcs deburr &gauge tool .the disconnect tongs have 3 size teeth available, can easily remove the push fit fitting from pex, cpvc or copper pipe of 1/2 inch, 3/4 inch or 1 inch.it can deburr the cut end of the pipe & bevel the cut edge, ensure complete seal and smooth connection..
【Quality Material】the push to connect fittings removal tool is made of 40cr steel and tpr coated grips prevent slippage in wet conditions and one-handed operation for in-tight situations.good grips, hefty build to allow your free hand the ability to assist in the removal of fittings..
【Deburr and Gauge Tool】 deburring tool is made of lightweight and durable pvc.ideal for marking pipe depth and deburring..deburring tool is compatible with 1/4 to 1 inch sized pex, copper, cpvc, pe-rt and sdr-9 hdpe pipe.
【Fast Disconnection】 simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly. deburring pipe and depth gauge tool, easy measure insertion depth and deburring pipe after pipe is inserted..

Check Stock

Manual Pipe Welder HDPE Butt Fusion Welding Machine Electric Tube Butt Fusion Equipment Hot Melt Solder Welder for 2.48"-7.87" PE PP PB PVDF HDPE PVC Pipes and Fittings

【Application】The welder is suitable for PE PP PB PVDF PPR plastic pipe hot-melt butt welding. High quality design and construction provides an excellent machine for welding both on the worksite and in the factory..
【Welding Size】Welding level (outer dia) is 63mm(2.48”)、75mm(2.95")、90 mm (3.54”)、110 mm (4.33”)、125 mm (4.92”)、140 mm (5.51”)、160 mm (6.30”)、180 mm (7.09”)、200mm(7.87”)..
【Fast Heating Speed】Thick high-quality layer paint, uniform heat conduction, rapid heating of the tube, high work efficiency..
【Stable Performance】The heating plate adopts independent temperature control system and imports large gold paint surface coating, which has good invisibility and stability..
【Adjustable Temperature】Accurate scale temperature adjustment 0-280℃ Manual adjustment and lasting constant temperature..

Check Stock

MUNTE - SS304 Stainless Steel Female Threaded 3 Way Tee T Pipe Fitting 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" BSP Threaded (1")

Pipe Fittings and Tools include: Pipe fittings,copper pipe fittings, black iron pipe fittings, water pipe fittings, stainless steel pipe fittings, cpvc pipe fittings, iron pipe fittings, ABS pipe fittings, RV pipe fittings, Pipe fitting tools, PVC pipe fittings, PE pipe fittings..
Metal pipe fittings, Stainless steel pipe fittings, Socket, Female socket, Male socket, Wye, Tee 90, Elbow 90, Elbow 45, Reduced valve, Female elbow 90, Male elbow 90, Reduced tee, Reduced bush, cleanout, End Cap, PVC solvent cement, Clamp saddled, Flange, Steel backing ring, Adaptor, P trap with cleanout plug, Gasket, Valve.
Products are well manufactured, durable and have a long life, easy to disassemble and move during use..
Excellent quality, fast delivery, good after-sales. We promise to do everything in our power for you to be 100% satisfied.

Check Stock

SharkBite 1/2 Inch Clamp Ring, Pack of 100, Stainless Steel Plumbing Fitting, PEX Pipe, PE-RT, UC953CP100

EASY INSTALLATION: Slide the 1/2 in. clamp ring over the pipe, push the pipe onto the fitting and squeeze with your clamp tool.
COMPATIBILITY: Use with brass or poly PEX crimp fittings, PEX or PE-RT pipe and clamp tool.
QUALITY: SharkBite's quality and performance is field-proven and is the only push-to-connect brand than can ensure a clean, leak-free connection.
PREFERRED BY THE PRO: All SharkBite products meet the same standards for commercial and residential plumbing applications.

Check Stock

MacWork Exhaust Pipe Cutter, 0.6\ to 3.3\ Tailpipe Cutter, Chain Exhaust Cutter, Rolling Blade Design for Easy Cutting - Can Be Used as PVC Cutter or Copper Pipe Cutter

【Wide Application】14 rolling blades(11.8").This pipe cutter cut through 15-85mm(0.6" to 3.3") pipes with a maximum thickness of 2.5mm(0.1")..
【Effectively Cut】Perfect for cutting exhaust pipe and tailpipe of PPR, LOW CARBON STEEL and COPPER, not for use on stainless steel..
【Built to Last】100% new and high quality. Powerful and robust.Corrosion resistant coated handle for Comfort.Designed to access where space is limited..
【Keep Well-Oiled】Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item..
【Cut Pipes Easily】Cut pipe with our pipe cutter tool in easy steps: 1.Wrap chain snug around pipe.
4.Rotate handle back and forth to cut pipe.
5.Repeat steps 3 and 4 until cut is complete..

Check Stock

Bulkhead Union Push to Connect Tube Fitting 3/8 In Tube OD Stainless Steel Double Threaded 5 Packs

Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT.
Bulkhead Fitting Type: Push In Straight Male Connector.
Body:Nickel Plated Brass Seal, O-Ring NBR.
Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property.
Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently.
Fluid Admitted: Air, Vacuum, Water (No Freezing).
Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC.

Check Stock

PATIKIL Hose Barb Fitting Elbow 8mm Barbed M14x1.5 Male Thread 2 Pack Carbon Steel Pipe Adapters Connectors for Air Water Fuel Oil Gold

Overall Size: 46 x 35mm / 1.81 x 1.38 inch (L*W).
Advantage: Carbon steel material features high strength, high pressure, and high-temperature resistance. Leakproof comes with 2 washers for good sealing performance.
Instruction: The thread-to-barb pipe fitting is commonly used to connect pipes such as air, gas, water, oil, and fuel in a quick and simple way..
Application: The thread-to-barb pipe fitting is a coupling for joining 2 diameter sizes pipes in different directions. Can be used with PE, nylon and PU tubing in industrial environments, for many fluids.
Notice: Please confirm the correct size before ordering. You can dip the end of the tubing/hose in hot water for a while for push-on installation easily.

Check Stock

Hayes Digital Socket Fusion Pipe Welder Tool Complete Kit PRO (up to 2 in.)

Working range (Inches): ½ in. CTS – 2 in. IPS.
6 heating faces, 6 Chamfer tool and 6 Cold rings included sizes: 1/2 in. IPS - 3/4 in. IPS - 1 in. IPS - 1-1/4 in. IPS - 1-1/2 in. IPS - 2 in. IPS.
Voltage range: 110V -50/60 Hz - Power: 800W.
This machine can weld pipes made of: PPR, HDPE, MDPE, PE, PB.

Check Stock