ReviewsPpr Pipes Fittings

Reed Tool PPR200 Clean Ream Extreme with 3/8-Inch Hex Shaft, 2-Inch Head

Reams 2-Inch Sch. 40 PVC, CPVC and ABS Fittings.
Can be used with standard drills, cordless drills, or impact drills.
Works great for vent lines, drain lines, water lines.
Feature a 4-sided carbide insert which provides an extra cutting edge after 180-Degree cutting insert rotation.
PPR Fitting Reamers are NOT recommended for use on pressurized systems.

Check Stock

Legines Brass Pipe Fitting Hex Bushing 3/8 NPT Male to 1/4 NPT Female 1200psi 2pcs

Hex bushing for connecting two pipes with different diameters.
3/8" Male NPT threads on one end and 1/4" female NPT threads on the other for connecting pipes with different ends.
Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250....
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock

Pipe Décor Desk Inside Support Leg, Authentic Industrial Pipe, Unfinished Dark Grey Black Steel for Rustic Look, for Classic H Design Desks or Tables, 28.75-in H x 11.75-in, 1-in Diameter, 1-Pk

...cs 3.5-in diameter, assembled leg specs 28.75 inches tall and 11.75-in wide.
Includes 1 “H” support table leg comprised of (2) 1-in x 8-in pipes, (2)1-in x 18-in pipes, (1) 1-in x 6-in pipes, (4) 1-in round flanges, (2) 1-in tees, (8) screws, instructions, and a clean and seal sheet.
pipes and fittings are industrial grade black steel and malleable cast iron.
standard steel grey color, commonly known as black within the plumbing industry.
PIPE DECOR genuine industrial pipes and fittings will stand the test of time.
You will know Pipe Décor parts and accessories when you hold them, beauty and beast, strength and style.
easily customize your PIPE DECOR projects with our many sizes of pipes and fittings.
PIPE DECOR pipe and fittings are coated with a light industrial grease to prevent rusting.
we highly recommend that you clean and seal each piece, before assembly, to ensure that they stay rust-free.
sealing the pipe with polyurethane spray will protect it from rust and scratches.

Check Stock

ICOOL Inner-Outer Pipe Reamer/Tube Deburring Tool 3/16 to 1-5/8 inch for Copper PPR PVC Brass Aluminum Soft Steel Tubing and Pipes

【Capacity】The reamer is suitable for the diameter of tubing and pipes from 3/16 to 1-5/8 inch..
【Versatile Tools】Prepares for tubing soldering, removes burrs from sharp edges, such as copper, PPR, PVC, brass, aluminum, soft steel tubing and....
【Efficient Tools】Specifically designed for various tubing with tight space. The reamer is suitable for the inside and outside of the pipeline to....
【Sturdy Design】Long wearing steel blades for a long service time. Grooved durable hard plastic body for better grip..
【Multiduty】Reamer can work perfectly especially in tube cutting, deburring copper pipes in the air conditioner installation and vehicle repair..

Check Stock

1/2\ Floor Flange, Home TZH Malleable iron Pipe Fittings for Industrial vintage style, Flanges with Threaded Hole for DIY Project /Furniture/ Shelving Decoration (10 Pack)

3/4 INCH PIPE ELBOW – TEN PACK: Our Brooklyn Pipe cast iron fittings 10 pack elbow pipes are made with from superior steel with 100% durability and strength and provides you with great flange elbow fittings at a very affordable price..
PERFECT FOR DIY: Whether you’re looking to build a pipe shelf, pipe towel rack, pipe lamp, our malleable 90 degree elbow industrial fitting is up to the task. These fittings are for decor and DIY projects only, they are not rated to carry gas or water..
RAW IRON: Our 3/4 inch black malleable iron pipe fittings are raw and unfinished iron. This means that you will need to seal or paint the flanges for your project. When handling raw iron, it’s normal for your hands to get dirty. You’ve probably seen iron workers in movies, they don’t come home clean!.
ONE CONVENIENT PACK: Our 3/4 90 degree elbow threaded flanges fittings pipes give you 100% super convenient benefits than other bands because our Brooklyn Pipe elbow is designed to be compatible with your all project parts.
UNLEASH YOUR CREATIVITY: We inspect and pack each pipe fitting and we offer a LIFETIME warranty on our products, just give us a call or send an e-mail. Now, with our black pipes bring the rustic, industrial style into your home, office or any inte....

Check Stock

10-2 Plastic Triglides Slides

Coupling for connecting two pipes with the same diameter in a straight run.
Hub ends for connecting to male unthreaded pipes or fittings.
PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
Smooth interior finish for reduced friction and material buildup.
Meets specifications ASTM D2665 and D3311 for quality assurance.

Check Stock

QWORK 4 Pack Copper Pipe Cleaner and Reamer Set, 4 In 1 Pipe Deburring Brush Inner Outer Reamer Tubing Chamfer Tool for PVC PPR Copper Brass Aluminum Pipes

Package Contents: Includes 2 pieces of 4-in-1 pipe cleaning brushes and 2 pieces of inner-outer reamer,.
Fit: The reamer is suitable for 3/16 inch to 1-1 / 2 inch pipe diameter, ideal for PVC PPR Copper Brass Aluminum Pipes..
Advantage: It can remove burrs in clockwise and counterclockwise directions. Can also clean the inside and outside of most pipes..
Usage: Rotate the screw switch to adjust the distance of the cutting wheel. Suitable for cleaning, polishing, paint removal/ rust removal of metal part..
Durable: Pipe reamer - Plastic, internal deburring blade - alloy steel, and brush - stainless steel, anti-rust, durable to use..

Check Stock

Fleetwood Mac Greatest Hits

Effectively removes oil, grease, and dirt from the surfaces of all sizes, classes, and schedules of PVC, CPVC, ABS, and styrene.
Designed for use before the application of Weld-On pipe primers and solvent cements.
Ensure the strongest bond possible between pipes and fittings by preparing your surfaces.
Low-VOC content minimizes environmental impact and helps improve crew working conditions.
May be used on FlowGuard Gold pipes and fittings.

Check Stock

2 Pieces Inner-Outer Reamer Pipe and Tube Deburring Reamer Tubing Chamfer Tool for PVC PPR Copper Brass Aluminum Pipes (Red)

Package content: you will get 2 pieces tube reamer in red color, which are nice tools applied for removing burrs from pipe edges, and enough quantity can meet your daily needs or replacement.
Durable material: the main body of the pipe reamer is made of plastic, which is strong and durable, and the internal deburring blade is made of hardened alloy steel, which can provide you with long-lasting use.
Size: the reamer is suitable for the diameter of pipes from 3/16 inch to 1-1/2 inch, and it can be applied for pipes of various materials such as PVC, PPR, copper, aluminum, brass, aluminum and so on.
Easy to use: the alloy steel blade can cut copper, aluminum, brass and plastic pipes and other types of tubing quickly and accurately, and you can rotate the screw switch to adjust the distance of the cutting wheel back and forth.
Convinent design: the burrs can be removed in both clockwise and counterclockwise directions, and the tube reamer is suitable for the inside and outside of the pipeline to use.
The screw of the pipe cutter can easily control the cutting pressure for clean cutting.

Check Stock

NIBCO C4806 2 HXH 45 ELBOW PVC White, 2 Inch

45-degree elbow for connecting two pipes at an angle.
Hub ends for connecting to male unthreaded pipes or fittings.
PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
Smooth interior finish for reduced friction and material buildup.
Meets specifications ASTM D2665 and D3311 for quality assurance.

Check Stock

Legines Brass Pipe Fitting Long Nipple, 1/8' NPT Male x 1/8' NPT Male Extender Straight Connector, 1-1/2'Length 1200psi (Pack of 5)

Long nipple for connecting two threaded pipes and extending pipe length.
1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes.
Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock