ReviewsPpr al ppr Pipes Fittings

Encoder Metal Gearmotor 12V DC High Speed 600RPM Gear Motor with Encoder for Robotics

✔Product type: DC Gear motor with two-channel Hall effect encoder.
✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
✔Single Output 120 Pulses Per Revolution: Gear Reduction Ratio: 1/10, Each Loop Output Pulses: 12PPR 10*12=120PPR.
✔Wiring Diagram: Red - Motor power terminal (+).
✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..

Check Stock

Encoder Metal Gearmotor 12V DC High Speed 130RPM Gear Motor with Encoder for Arduino and 3D Printers

✔Product type: DC Gear motor with two-channel Hall effect encoder.
✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
✔Single Output 540 Pulses Per Revolution: Gear Reduction Ratio: 1/45, Each Loop Output Pulses: 12PPR 45*12=540PPR.
✔Wiring Diagram: Red - Motor power terminal (+).
✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..

Check Stock

Bemonoc Encoder Metal Gearmotor 12V DC Low Speed 60 RPM Gear Motor with Encoder for Arduino and 3D Printers

✔Product type: DC Gear motor with two-channel Hall effect encoder.
✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
✔Single Output 1176 Pulses Per Revolution: Gear Reduction Ratio: 1/98, Each Loop Output Pulses: 12PPR 98*12=1176PPR.
✔Wiring Diagram: Red - Motor power terminal (+).
✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..

Check Stock

Capri Tools 1-5/8 in. Ratcheting Pipe Cutter, Model: CP11290

The Ratcheting Pipe Cutter makes clean cuts in pipes and tubing effortlessly. True one-hand operation with non-return ratcheting mechanism makes getting the perfect cut easy.
V-shaped cutting blade is specially design to provide a clean cut. Ultra-sharp high carbon steel material helps make cutting effortless.
Blade with telescoping mechanism remains sheathed in the blade guard until the tool is engaged. Blade slider lets you quickly move the blade forward to meet the pipe instead of slowly ratcheting forward. Pushing the handle forward instantly releases the ratchet and sheathes the blade.
Replaceable blade with simple, tool-less blade replacement.
Cuts PVC, CPVC, PP, PE, PER, PEX, ABS, PEHD, PPR, and PB piping up to 1-5/8 in. in outer diameter. Durable and rust resistant all aluminum construction. Locking latch secures the pipe cutter when not in use.

Check Stock

2 Pieces Inner-Outer Reamer Pipe and Tube Deburring Reamer Tubing Chamfer Tool for PVC PPR Copper Brass Aluminum Pipes (Red)

Package content: you will get 2 pieces tube reamer in red color, which are nice tools applied for removing burrs from pipe edges, and enough quantity can meet your daily needs or replacement.
Durable material: the main body of the pipe reamer is made of plastic, which is strong and durable, and the internal deburring blade is made of hardened alloy steel, which can provide you with long-lasting use.
Size: the reamer is suitable for the diameter of pipes from 3/16 inch to 1-1/2 inch, and it can be applied for pipes of various materials such as PVC, PPR, copper, aluminum, brass, aluminum and so on.
Easy to use: the alloy steel blade can cut copper, aluminum, brass and plastic pipes and other types of tubing quickly and accurately, and you can rotate the screw switch to adjust the distance of the cutting wheel back and forth.
Convinent design: the burrs can be removed in both clockwise and counterclockwise directions, and the tube reamer is suitable for the inside and outside of the pipeline to use.
The screw of the pipe cutter can easily control the cutting pressure for clean cutting.

Check Stock

MacWork Exhaust Pipe Cutter, 0.6\ to 3.3\ Tailpipe Cutter, Chain Exhaust Cutter, Rolling Blade Design for Easy Cutting - Can Be Used as PVC Cutter or Copper Pipe Cutter

【Wide Application】14 rolling blades(11.8").This pipe cutter cut through 15-85mm(0.6" to 3.3") pipes with a maximum thickness of 2.5mm(0.1")..
【Effectively Cut】Perfect for cutting exhaust pipe and tailpipe of PPR, LOW CARBON STEEL and COPPER, not for use on stainless steel..
【Built to Last】100% new and high quality. Powerful and robust.Corrosion resistant coated handle for Comfort.Designed to access where space is limited..
【Keep Well-Oiled】Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item..
【Cut Pipes Easily】Cut pipe with our pipe cutter tool in easy steps: 1.Wrap chain snug around pipe.
4.Rotate handle back and forth to cut pipe.
5.Repeat steps 3 and 4 until cut is complete..

Check Stock

Multi Angle Miter Shear Cutter 45-135 Degree Adjustable Angle Scissors Trim Shears Hand Tools for Cutting Soft Wood Plastic PVC and Other

Sharp Enough, Ideal For Cutting Chamfers, Round Molds, Trunking And Pvc Strips, Rubber Gaskets, Molding And Weatherstrip.Recommanded material thick is....
Sturdy Steel Blade, Shape Blade And Ergonomic Plastic Handle, Comfortable Cut, No Hand Fatigue For Long-term Use,not Suitable For Cutting Metal And....
The Cutting Angle Is 45°-135°, Which Can Be Cut Into Different Shapes Of Wire Grooves As Needed..
For Cutting Pvc Ppr Pe Pipes, Branches, Wires, Etc.made Of High Quality Plastic And Stainless Steel For Durability..
Similar To A Garden Shear, The Built-in Fence Allows You To Cut Miter Joints Quickly, Easily, And With Accuracy..

Check Stock

Milwaukee 48-22-4041 Iron Carbide Core Large-Looped Straight Jobsite Scissors w/ Onboard Ruler Markings and Index Finger Groove (2 Pack)

Sharp Enough, Ideal for Cutting Chamfers, Round Molds, Trunking and Pvc Strips, Rubber Gaskets, Molding and Weatherstrip.recommanded Material Thick is Below 1/8" (3mm)..
Sturdy Steel Blade, Shape Blade and Ergonomic Plastic Handle, Comfortable Cut, No Hand Fatigue for Long-term Use,not Suitable for Cutting Metal and Stainless Steel..
The Cutting Angle is 45°-135°, Which Can Be Cut into Different Shapes of Wire Grooves As Needed..
For Cutting Pvc Ppr Pe Pipes, Branches, Wires, Etc.made of High Quality Plastic and Stainless Steel for Durability..
Similar to a Garden Shear, the Built-in Fence Allows You to Cut Miter Joints Quickly, Easily, and with Accuracy..

Check Stock

DAOKI 10PCS Rotary Encoder Module KY-040 Brick Sensor Switch Button Development Board with 10PCS 15×16.5mm Knob Cap, Dupont Cable for Arduino AVR PIC

✔Product type: DC Gear motor with two-channel Hall effect encoder.
✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
✔Single Output 240 Pulses Per Revolution: Gear Reduction Ratio: 1/20, Each Loop Output Pulses: 12PPR 20*12=240PPR.
✔Wiring Diagram: Red - Motor power terminal (+).
✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..

Check Stock

DURATECH Ratchet PVC Pipe Cutter, Cuts up to 2-1/2\ PEX, PPR, PE and Plastic Hoses, with PTFE-Coated Sharp Blade, Suitable for Home Repairs and Plumbers

Features ratchet gear design, this pipe cutter provide energy-efficient cutting, which can successfully complete the cutting operation with one hand. And with ratchet gear, it can gradually and effectively cut into pipes, prevent the pipe from deforming and crushing..
Heat-treated blade, sharp edge for burr-free cutting. Coated with Teflon(PTFE) not only has reliable strength but also has waterproof surface for anti-rust.To save space and prevent accidental injury, you can shrink the handles on both sides and lock the safety lock when you not to use it..
With 2-1/2in(63mm) maximum opening, this cutter is able to cut plastic hose under 2-1/2 inch diameter. Notice: to ensure product durability, do not cut in metal pipes, when using the other hand to hold to ensure that the cutting surface is vertical..
Heavy duty aluminum handle with spray coated surface can effectively resist corrosion, and prolong product service life..
Could be a great helper in pipe repair jobs. Especially when you need to cut pipes into the required length, remove damaged sections of pipework before replacement. Fits for PVC, PPR, PE and other plastic hoses cutting..

Check Stock

Induzeug Pipe and PVC Cutter for Cutting 1-1/3\

【Ergonomic Ratchet design】The professional pipe cutting adopts self-locking ratchet design. The design to cutting operation with one hand, The handle adopts the principle of leverage, which makes cutting more labor-saving. Prevent rebound design with safety of users..
【Blade durable】The high-quality manganese steel blade is adopts Japanese Teflon coating process strong shearing force, high hardness, sharp blade, with anti-rust coating, increases the service life..
【Ergonomic handle easy to use】The aluminum alloy material and the handle rubber wrap the handle, which increases the anti-skid and wear resistance of the handle, and also improves the comfort of use.There is a buckle at the bottom of the handle, which is convenient to open and use with one hand. The handle locks the safety lock when not in use, saving space and preventing accidental injury..
【Wide range of multipurpose】The Induzeug Pipe Cutter simple to use and easy to operate, for cutting most plastic (PVC, UPVC, PPR, PEX, PE, rubber hose) and multilayer pipes. You can choose the corresponding size Pipe Cutter, cut for 1-1/3.

Check Stock