ReviewsPpr fiberglass Pipe

Tanstic 3Pcs Ratchet PVC Pipe Cutter Tool and PEX Straight Cut Pipe Cutter with Mini Tube Cutter, Ratchet-type Pipe Cutter One-hand Fast Pipe Cutting Tool PEX Tube Cutters for Pipe Cutting

  • ✔️[Package Includes] You'll get 1pc ratchet-type pipe cutter with max opening of 1-5/8 inch (42mm) and 1pc straight pipe cutter with max opening of 1-3/8 inch (35 mm), 1pc mini tubing cutter, total of 3pcs, which can meet your needs of daily use..
  • ✔️[High-quality Material] Our blades of pipe cutters are made of high-quality SK5 material with Teflon-coated on the surface, durable, sturdy, sharp, not easy to rust or break, high-hardness, good-toughness, which can be used for a long time and help to cut the pipe accurately and effectively..
  • ✔️[Ratchet PVC Pipe Cutter] The large pipe cutter in this kit adopts ratchet drive technology, which enable you to complete the cutting operation with one hand, labor-saving. Besides, this ratchet drive design can provide the function of automatic locking during the cutting process, which can protect users from injury caused by the rebounding blade. And the ergonomic handle is equipped with rubber, comfortable to grip, anti-slip..
  • ✔️[Straight Cut Pipe Cutter & Mini Tubing Cutter] The handle of the straight pipe cutter adopts the lever principle, labor, saving, light, handy. You just need to put the pipe into the knife edge, and then pull and tighten the handle to cut the pipe accurately and evenly. Besid....
Check Stock

Multi Angle Miter Shear Cutter Hand Tools,45-135 Degree Adjustable Angle Scissors Trim Shears Tools

  • Designed to cuts tile trim, PVC piping, quarter round, tack strip and other light materials..
  • Suitable for cutting PVC PPR PE plastic pipe, timber strips, wire, ect. Can't cut hard wood..
  • MULTI DEGREE: The sharp blades have a cutting angle of 45, 60, 75, 90, 105, 120, 135 degrees, allowing you to freely cut differently shaped wire slots....
  • HIHG QUALITY: Sturdy steel frame with plastic cover handle for comfortable diagonal cutting, not suitable for cutting metal and stainless steel..
  • Non-slip ergonomic handle, time and labour saving, easy to cut..
Check Stock

Prime Wire & Cable PHC42W06 DE-ICING CABLE WATER PIPE FREEZE PROTECTION

  • 6 ft. Black water pipe heating cable, 42 watt.
  • Stops metal and plastic pipes from freezing down to -40°f/-40°c.
  • Built-in thermostat automatically turns on at 40°f/4°c.
  • Materials required (not included) aluminum foil (recommended for plastic pipe).
  • fiberglass tape or similar with temperature rating 80 degrees C/175F or higher.
Check Stock

HORUSDY 2-1/2\ Ratchet PVC Pipe Cutter for PEX,PVC,PPR and Plastic Hoses, SK5 Steel Blades Ratcheting Pipe Cutter Tool for Home Repairs and Plumbers

  • [High-Quality] This Pipe Cutter is made of high-quality aluminum alloy and manganese steel.Its tough and durable..
  • [Safe and Convenient] The pipe cutting machine adopts the ratchet drive technology to make the cutting smoothly and auto-locking function protects users away from injury..
  • [Cutting Capacity] Cutting capacity is up to 2-1/2 inch. suitable for most plastic (PVC,CPVC,PPR,PEX,PE,Rubber hose)and different layers tube..
  • Rubber-textured handle, comfortable to use, reliable to hold, and not easy to hurt. Buckle the safe lock,the tube cutter will save space to keep and store..
  • [Deburring Tool] The deburring tool is made of solid plastic structure and high-speed steel. It can be quickly, cleanly and conveniently applied to the inner diameters of different pipes..
Check Stock

DURATECH Ratchet PVC Pipe Cutter, Cuts up to 2-1/2\ PEX, PPR, PE and Plastic Hoses, with PTFE-Coated Sharp Blade, Suitable for Home Repairs and Plumbers

  • Features ratchet gear design, this pipe cutter provide energy-efficient cutting, which can successfully complete the cutting operation with one hand. And with ratchet gear, it can gradually and effectively cut into pipes, prevent the pipe from deforming and crushing..
  • Heat-treated blade, sharp edge for burr-free cutting. Coated with Teflon(PTFE) not only has reliable strength but also has waterproof surface for anti-rust.To save space and prevent accidental injury, you can shrink the handles on both sides and lock the safety lock when you not to use it..
  • With 2-1/2in(63mm) maximum opening, this cutter is able to cut plastic hose under 2-1/2 inch diameter. Notice: to ensure product durability, do not cut in metal pipes, when using the other hand to hold to ensure that the cutting surface is vertical..
  • Heavy duty aluminum handle with spray coated surface can effectively resist corrosion, and prolong product service life..
  • Could be a great helper in pipe repair jobs. Especially when you need to cut pipes into the required length, remove damaged sections of pipework before replacement. Fits for PVC, PPR, PE and other plastic hoses cutting..
Check Stock

HEATIT JHSF1 Self Regulating Pre-Assembled Heating Cable 75-feet 120V Roof deicing and Pipe freeze Protection

  • 6 ft. water pipe heating cable, 42 watt, black color.
  • Stops metal and rigid plastic pipes from freezing down to -40°F — built-in thermostat automatically turns heating on when pipe temperature is below 42.8° F (close to freezing) and turns heating off once pipe is warmed to 55.4° F (well above freezing).
  • A single 6 foot heating cable is suitable for 6 foot to 8 foot long pipes that are 3/8 inches to 3/4 inches in diameter, or for 6 foot long pipes that are 1 to 1-1/2" in diameter. NOTE: Use only for water filled plastic (including PEX) or metal pipes. Not for use with anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines, and so on..
  • Features grounded plug with indicator light.
  • Pre-assembled, easy to install using the included instructions. Materials required (not included) are: aluminum foil (recommended for plastic pipe), fiberglass plumbing pipe insulation, fiberglass tape or similar with temperature rating 175° F or higher..
Check Stock

iCrimp PEX Pipe Cutters for Cutting 1/8 -1 PEX Tubings NOT for PVC Pipes

  • Capacity:PPR PEX cutter is an easy to use, great value cutting tool to handle cutting 1/8 in., 1/4 in., 3/8 in., 1/2 in., 3/4 in., and 1 in. PEX A, B, C pipe..
  • Easy Operation: Its spring-loaded handle opens easily so you can make multiple cuts quickly and accurately. The choice of both DIY home-owner and professional plumbers. Cuts PEX like butter..
  • Compact Design: It's compact enough to fit in your pocket or tool box so you can always have it on hand when you need it..
  • Shear Cutting: Use this PEX tool to create a clean and burr free cut for either Push to Connect PEX fittings or brass crimp fittings..
Check Stock

SoloWilder Fireproof Chimney Webbing Outdoor Camping Stove Flue Protector with 2 Clamps

  • Fiberglass Material: Fiberglass is a new type of synthetic fiber with fire retardant ability. It will only carbonize when the temperature around the fireproof webbing reaches 968F/520℃. It does not burn or melt of its excellent fire-retardant properties. While protecting your tent, it will not leave any dirt on the stovepipe..
  • High-Temperature Resistance: This heat-resistant webbing can be used on the stovepipe for a long time at 752F/400℃ and will not ignite when the instant temperature reaches 1085F/538℃. It has very little heat loss and can be used for a long time..
  • Retractable Clamps: The two clamps we offer can help you fix the fireproof webbing to the stove pipe. The diameter of these 2 clamps is adjustable for stovepipes with a diameter between 2.4-3.5inch. By twisting the nuts, you can easily attach and remove the webbing..
  • Multiple Uses: By using this webbing at the joint between the stove pipe and the tent, you can protect your tent from overheating and catching fire. In addition, it can also be used on the stove pipe above the stove to protect you from burns, and be used in the exhaust pipe, indoor gas pipe, etc..
  • Dimensions: Length 16.4ft/5m, width 2inch/5cm. Weight 13oz..
Check Stock

Midwest Hearth Poly Chimney Cleaning Brush (8-Inch Round)

  • POLYPROPYLENE BRUSH - Stiff poly bristles clean coal and soot from metal stove pipes, flue, and chimneys.
  • GALVANIZED STEEL STEM - Heavy duty double-spiral stem for long-lasting durability.
  • 1/4 INCH NPT FITTINGS - Features 1/4" male pipe threads for use with our fiberglass rod kits (sold separately).
  • PROFESSIONAL QUALITY - Superior components provide excellent performance.
  • MADE IN USA - Quality manufactured in the Midwest!Description Chimneys should be cleaned at least once a year, and more often if you use your fireplace frequently. Midwest Hearth Poly Chimney Brushes are designed to be used with metal chimney flue to help prevent scratching and marring of the steel pipe. Measure the inner diameter of your flue and order the same size brush: 6" Round or 8" Round. Our chimney brushes are professional quality and feature stiff polypropylene bristles and a heavy duty galvanized steel stem. The brush will have 1/4-Inch male pipe threads at the end that may be attached to extension rods. Midwest Hearth offers an 18-Foot fiberglass rod extension kit that is compatible with these brushes (sold separately)..
Check Stock

Tweezerman Slant Tweezer - Pineapple Punch Model No 1252-PPR

  • Item Condition: 100% authentic, new and unused. Tweezerman Slant Tweezer - Pineapple Punch Model No. 1252-PPR..
  • Tweezerman Slant Tweezer - Pineapple Punch Model No. 1252-PPR: Buy Tweezerman Tweezers - Grab hair on the go. Ideal size for makeup bag and travel....
Check Stock

Poulan 580940901 Chainsaw Gas Cap

  • Replaces old part numbers 577858501, 530047192 and 530047164.
  • Fits PP3816A, PP4218A, PPR4218A, PP3816A, PP4218A and PPR4218A.
Check Stock