ReviewsPre Amplifier

Topping DX3 Pro+ ES9038Q2M Bluetooth 5.0 LDAC Audio Decoder DSD512 DAC AMP NFCA Headphone Amplifier Pre Amplifier (Black)

  • ...luetooth, we abandon the built-in DAC of QCC5125 and connect its digital signal to ES9038Q2M to decode..
  • NFCA circuit ：The new DX3 Pro+ has the NFCA circuit optimized for this unit, giving the ultra low noise and distortion. It pairs with high sensitivity IEMs and power hungry high impedance headphones nicely..
  • Pre-amplifier function ：Adapt to different usage scenarios, DX3 Pro+ has 4 output modes: Headphone Amp, Headphone Amp+ Line out, DAC, and Pre amplifier..
  • PA3s is the best power amplifier for DX3 Pro+： PA3s has RCA+TRS balanced inputs. When used with DX3 Pro+, the TRS balanced input can be used to input other audio sources. The output power of 80W x [email protected]Ω, 10%THD+N, 65W X [email protected]Ω, 1%THD+N can be adapted to most situations where speakers are used..
  • Bluetooth headphone amp / Bluetooth DAC application： Connect the Bluetooth of the phone, tablet or notebook to DX3 Pro+, and connect the power amplifier, active speakers or headphones to the DX3 Pro+'s output, then DX3 Pro+ becomes your Bluetooth Headphone amp / Bluetooth DAC. If your device supports LDAC transmission, you will get even better experience..
Check Stock

Parts Express Cast Frame #10-32 Speaker Mounting Kit

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound....
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16....
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
Check Stock

SoundArtist PRE-1 Preamp HiFi Pre-Amplifier Vacuum TubeAmplifier with Remote Control Silver Panel

  • Sound characteristics: strong control, quiet music background, balanced sound quality in three stages, clear layer, thick and rich tone, full and....
  • This Preamp adopts the classic design of double E cattle power supply, bile rectification, etc..
  • Remote control operation design, more convenient to use..
  • The panel adopts 0.8 cm thick aluminum alloy brushing process, and the volume knob is made of solid aluminum.
  • This is a pre-amplifier, you need to connect a power amplifier or a Integrated amplifier.Instead of connecting the speakers directly..
Check Stock

4-Port Cable TV/Antenna/HDTV/Internet Digital Signal Amplifier/Booster/Splitter with Passive Return, F59 Terminators (Lindsay LSA84)

  • This is a TV signal amplifier which provides one input and four outputs, for connecting multiple TV sets or cable boxes. Allows multiple devices to connect to an antenna or cable system without losing signal quality..
  • Suitable for Antenna or Cable TV use. Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Not compatible with satellite systems..
  • Meets or exceeds all SCTE Standards. PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times. Amplifier has 6 kV ring wave surge design for protection against voltage spikes. Operating temperature: -40 to +60 ºC (-40ºF to +140ºF). 15 PSI weather-tight seal..
  • Prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception. Includes Amplifier, Power Supply, and two 75-ohm terminators..
Check Stock

KGUSS DAC-K3 PRO USB DAC Headphone Amplifier Mini HiFi Optical/Coaxial/USB DAC Decoder Audio 24Bit 192KHz DA Converter ESS9018K2M Decoder Multifunctional Preamp Desktop Amplifier (Black)

  • It is both"a headphone amplifier"and"a preamp" ▶️ The DAC-K3 Pro is not only a professional headphone amplifier, but also a pre-stage. When used as a pre-stage,it can also play the same excellent performance. It can be widely used with power amplifiers or active speakers.This is a great choice for your first USB-DAC!.
  • High-performance ▶️ Chips: TPA6120A2+LME49720AN+NE5532+ES9018K2M+SA9123L. TPA6120A2 is a high-fidelity audio power amplifier based on current feedback architecture.Its distortion far exceeds that of many op amps that only process small signals. The operation amplifier LME49720AN three sections are balanced and very thick,the dynamic and low frequency strength and quantity sense is very good, the sound field is broad,the high frequency to go is very smooth.The sound is pure and real..
  • Wide Compatibility--Various Inputs Supported ▶️ The unit supports PC-USB（Can also be connected to a cell phone）, fiber-optic, coaxial, and other digital audio inputs. In addition, it is widely compatible with Windows XP/W7/W8/W10/MAC/Linux, etc. Note: Depending on the PC, the driver may not install automatically, please contact our custo....
Check Stock

Rockville SK510 PACKAGE 10 1200w Loaded K5 Car Subwoofer Enclosure+DB11 Amp

  • Loaded Sub Enclosure Features: Rockville Single 10" K5 1200w Car Subwoofer Pre-loaded In Vented Sub Enclosure, Peak Power Handling: 1200 Watts, Program Power Handling: 600 Watts, CEA Rated RMS Power Handling: 300 Watts.
  • Vent dimensions (inches): 2" x 6.5" x 8", Tuning frequency of enclosure: 35 Hz, 2" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire.
  • Features of Amplifier: Rockville dB11 1400w/700w RMS 2-Ohm Class-D Mono Car Amplifier and Bass Remote, CEA Compliant Power Ratings.
  • Peak Power Rating: (The amount of power the amplifier can produce for a split second at the loudest part of a song) - 2 Ohm: 1400 Watts x 1 Channel, - 4 Ohm: 880 Watts x 1 Channel, High-Speed MOSFET Power Supply.
  • Features of wire kit:, Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit, (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable, 17 8 Gauge Translucent Blue SuperFlex Power Cables, 17 18 Gauge Blue Remote Cable.
Check Stock

Teac AX-501 Integrated Amplifier Silver

  • ALC0240 Class-D Power Amplifier by ABLETEC.
  • A fully-balanced approach used for the analog circuits on the pre-amplifier.
  • Maximum 120W + 120W of output power for practical use (at 4ohms impedance).
  • Dual analog level meters with dimmable backlight.
  • No Cooling-Fan, for Quiet Operation Efforts to eliminate noise and ensure high-quality audio.
Check Stock

4-Port Cable TV/Antenna/HDTV/Internet Digital Signal Amplifier/Booster/Splitter with Passive Return, Coax Cable, F59 Terminators (Antronix MRA4-8)

  • Four port amplifier with a passive return path provides an increase of +7.5 db per port. Reduces snow and prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception..
  • Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Exceeds all SCTE Standards..
  • 6 kV surge protection for protection against lightning strikes. The nickel plated housing provides the excellent corrosion resistant protection against salt fog and rust. 5 Year Warranty (amplifier only)..
  • 3 dB Noise Figure provides clean amplification of weak signals to overcome the poor noise figure in TV tuners and converters. 6 kV Combination Wave Surge Protection Unique surge protection on all ports..
  • PTC Short-Circuit Protected UL Listed Adaptor – Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times. Includes Amplifier, Power Supply, 36 inch coaxial cable and two 75-ohm port terminators..
Check Stock

Amplifier, Cable TV RF Broadband 8dB Gain Four Output 5-1002Mhz w/ Power Adapter

  • Four port amplifier with a passive return path provides an increase of +7.5 db per port. Reduces snow and prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception..
  • Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Exceeds all SCTE Standards. Coaxial cables are not included..
  • 6 kV surge protection for protection against lightning strikes. The nickel plated housing provides the excellent corrosion resistant protection against salt fog and rust. 5 Year Warranty (amplifier only).
  • 3 dB Noise Figure provides clean amplification of weak signals to overcome the poor noise figure in TV tuners and converters. 6 kV Combination Wave Surge Protection Unique surge protection on all ports..
  • PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times..
Check Stock

Audiolab 6000A 100-watt Stereo Integrated Amp/Bluetooth DAC - Black

  • Dared MP-5BT is a most popular tube amplifier, sales over 100 thousand units, top player in hi-fi vacuum tube amplifier industry, It is a favorite of music buffs for the past 20 years, with a number of patented technologies, with amazing sound and amazing appearance, it is a work of art!.
  • This vacuum tube amplifier adopts hand welding and with highest quality components and materials to ensure the true reality of the sound quality, The amplifier hybrid preamp section and class AB power amp section. The tubes deliver warm and subtle music to the preamp section, while the solid state components increases the efficiency and quality of the music..
  • 25 watts per channel output, power can drive most home stereo speakers, Support bluetooth wireless for android, iPhone, tablets, smartphones, other streaming devices (supports APTX), support direct line-in, friendly USB and Aux input, when you plug it in via DAC/USB. Speaker output, pre output and 3.5mm headphone personal listening output..
  • Vacuum tube amplifiers in that the glass vaccum tube section is on the exterior. The chassis is made of finest stainless steel and plated with a high quality rose gold finish, flanked by two 1 inch thick wood panels with a lacquered black piano finish. which looks great in any ....
Check Stock

Rockville SK58 Package 8 800w Loaded K5 Car Subwoofer Enclosure+DB10 Amplifier

  • Loaded Sub Enclosure Features:, Rockville Single 8" K5 800w Car Subwoofer Pre-loaded In Vented Sub Enclosure, Peak Power Handling: 800 Watts, Program....
  • Vent dimensions (inches): 1.25" x 4.75" x 7", Tuning frequency of enclosure: 37 Hz, 1.5" 4-Layer Black Aluminum Voice Coils Wound with OFC (100%....
  • Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone – This cone is very efficient which makes the speaker sound louder even without requiring....
  • Features of Amplifier: Rockville dB10 800 Watt/400 Watt RMS Mono Class-D 4-Ohm Amplifier, CEA Compliant Power Rating @ 4 Ohm: 200 Watts x 1 Channel,....
  • Features of wire kit: Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit, (1) 17 High Grade Twisted Pair of 100% Copper RCA....
Check Stock