ReviewsPre assembled Hotend

Ewigkeit 24V 40W Heater Cartridge 620 Ceramic Hotend for 3D Printer Prusa Mendel (Pack of 5pcs)

  • 24v cartridge Heater is made of 304 stainless steel material,Diameter: 6mm.
  • Voltage: 24v, Power: 40w, Conveniently pre-wired with 1 meter long high temperature resistant wire.
  • Easy installation, wide temperature range, good stability, high reliability provide a high corrosion prevention.
  • Heating cartridges work with Creality CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro 3d printer,Anet E10 etc.
  • 5pcs of 24V 40W 620 ceramic cartridge heater for 3D printer hotend.
Check Stock

Official Creality Sprite Extruder Pro Upgrade Kit for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 MAX/Ender 3 S1/Ender 3 S1 Pro 3D Printers, Support Printing Flexible Filament, BL Touch/CR Touch

  • ...tible With Creality Ender 3 Series 3D Printer - Creality Sprite extruder pro is compatible with creality Ender 3, creality Ender 3 v2, creality Ender 3 pro, creality Ender 3 s1, creality Ender 3 max, creality ender 3 s1 pro, creality ender 3 s1 plus 3d printer...
  • All Metal Hotend Kit - All-metal Hotend Kit with heating block, titanium throat and cooling block, allows you to print high temperature materials at 300°C. This ender 3 v2 upgrades perfectly combine dual gear extruder and all metal hotend, enables all the Ender-3 series 3D printers a direct extrusion and high temperature printing conditions..
  • Large Torque, Extrusion Force Up to 80N - The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N (depending on filaments). More precise control of feeding withdrawal..
  • Dual Gear Feeding, More Stable Printing -The ender 3 direct drive adapts double-toothed structure which does not damage filaments, allowing more reliable and stable feeding. With adjustable tensioner, allows you to fine-tune the pressure exerted by the drive gears onto the filament to print more exquisite models....
Check Stock

WEEDO TINA2S 3D Printers for Kids and Beginners, Mini 3D Printer with Wi-Fi Printing and Auto Leveling, Fully Assembled Small 3D Printer with Open Source Firmware, Work with PLA/PLA+/TPU

  • 3D Printers for Kids & Beginners: Fully assembled, Auto bed leveling, Massive pre-sliced files. You can get the mini printer up and running in minutes. It is a perfect entry level FDM printer! The size of the small printer is 210*210*290mm, the print size is 100*105*100mm, it rarely takes any room..
  • WIFI Printing: The printer can print by SD card/ USB/ WIFI. It compatibles with Wiibuilder, Cura, Simplify3d and PoloPrint Pro App. You can control print wirelessly and remotely. TINA2S upgrade wifi module to ensure faster and more stable transmission..
  • APP Model Library: Awesome pre-sliced models are available at your fingertips in our Poloprint Cloud app. You also can slice your own model with the easy to use Wiibuilder Software. Printing is a breeze. It is a perfect gift for kids on Christmas, Birthday, Thanksgiving, Halloween..
  • Excellent Print Quality & Reduce Clogs: Auto bed leveling improves bed adhesion and accuracy. Dual Z-axis design makes printing more stable. Bring you high print quality. Upgraded high speed cooling fan and hotend reduce the clogs. Clip-on design allows you to replace the nozzle easily and qui....
Check Stock

Honbay 6pcs Aluminum E3d V6 Heat Block for Makerbot 3D Printer Extruder

  • Material: Made of premium quality silicone gel, the heater block silicone cover features non-stick..
  • Perfect fit, will not fall off or come loose during prints..
  • Helps to keep the hotend temperature extremely stable..
  • Package includes: 3pieces silicone cover for E3D V6 3D printer HotEnd..
Check Stock

[Gulfcoast Robotics] Bowden Collet and Clip Set for 1.75mm Creality All Metal Hotend 5 Pack

  • Bowden collet and clip set are designed for and compatible with the [Gulfcoast Robotics] All Metal Hotend for Creality 3D Printers..
  • Also compatible with the Micro Swiss All Metal Hotend and similar products on the market..
  • Package includes (5) sets of black bowden collets and matching collet clips..
Check Stock

Creality 3D Capricorn Bowden PTFE Tubing 1 Meter Tube Cutter XS Series with 5 pcs Nozzles for 1.75mm Filament Ender 3 Ender 3 Pro, Ender 5, CR-10,CR-10S 3D Printer

  • Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend..
  • Capricorn PTFE tubing ensures the highest quality prints at any given temperature. This XS series tubing is rated for high temperature printing, and also boasts greater lubricity leading to less friction, less slippage, and less wear. Great for flexible filaments! Also guaranteed with to have an inner diameter accurate to within 0.05mm, enabling fine tune retraction settings with more precision than ever before!.
  • The perfect replacement kit if the your stock hotend has failed or constantly jams.Capricorn tubing provides enhanced precision for retraction settings, meaning less stringing on prints once calibrated..
  • Comes with 1 Meter Tubing, five Brass nozzles and one cutter.
Check Stock

FLSUN V400 3D Printer, 400mm/s High Race FDM Printer, 300x300x410mm Large Building Size, Auto Leveling, 7-inch Touch Screen Delta 3D Printer Direct Extruder

  • V400 maximum printing speed is 400mm/s which saving more than 70% of the printing time.
  • Double linear guides ensure unparalleled stability.
  • Amazing Build Colume & Direct Drive Extruder.
  • With an extraordinary print size of 300 x 410 mm.
  • The hotend and the extruder housing have been combined, resulting in compact and lightweight system.
  • High Temperature Nozzle & Various Filament.
  • A bi-metallic heatbreak allows you to print up to 300 °C, which ensures widely filament compatibility.
  • V400 features the function of resume printing after power outage or any other unexpected stoppage, save time and filament.
  • User-friendly display & Pre-installed Klipper firmware.
  • An easy-to-use 7-inch LCD touchscreen makes handling particularly user-friendly.
  • The V400 comes with Klipper firmware pre-installed.
Check Stock

Sovol SV06 All Metal Planetary Direct Drive Extruder Coming with Stepper Motor Without Fans and Auto Leveling

  • This half kit of extruder comes without hotend, fans and auto leveling..
  • We also sell the hotend and PEI build plate of SV06 on Amazon now. If you have spare needs you can order them..
  • More SV06 accessories will be listed for sale on Amazon. If you want to order any accessories we have not sell on Amazon temporarily please let us know through Amazon message. All accessories of SV06 can be ordered from us..
Check Stock

Official Creality 3D Capricorn XS Series Bowden Tube, PTFE Bowden Tube (2 Meters) with 4Pcs PC4-M6 Fittings and 4Pcs PC4-M10 Fittings for 3D Printer 1.75mm Filament

  • Authentic Guaranteed: The Capricorn Premium XS Bowden Tubing is enhanced with a proprietary blend of high performance additives, it is well regarded as the highest quality PTFE tubing in all of 3D printing..
  • Best Performance: Capricorn bowden tubing is designed specifically for 1.75mm filament with extremely precise inner & outer diameter, the filament is loaded smoothly to the hotend with as little room for error as possible between the extruder and the hotend..
  • Advanced Material: Capricorn PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. This Capricorn XS tubing can keep working at high temperatures up to 260℃..
  • Perfect Package: Package comes with two PC4-M6 fitting for extruder and two PC4-M10 fitting for hotend, one PTFE tube cutter, which can cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting..
  • Specifications: 2M Capricorn Bowden PTFE Tubing (1.95mm ± 0.05mm inner diameter, 4mm outer diameter). Reducing the "wiggle room" or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems..
Check Stock

3D Printer Heatbreak Throat 2 PCS Titanium Alloy Compatible with E3D V6 Hotend Extruder Threaded Thermal Barrel Feeding Tube - M7 1.75mm-Red

  • ✯ PACKAGE INCLUDES- 2 pieces V6 heatbreak for 1.75mm filament.
  • ✯ PREMIUM MATERIAL- This 2 pcs heat break is made of high-quality titanium alloy, sturdy, durable, withstanding high temperature up to 420℃.
  • ✯ APPLICATION- Compatible with E3D V6 Long Hotend Extruder.
  • ✯ FEATURE- V6 hotend thread heatbreak with integrated design to prevent jamming, improve printing efficiency! The interior of the tube is smooth,....
Check Stock

BIGTREETECH Direct Metal Hotend with MK8 Nozzle CR10 Extruder Heatsink for CR10 Ender 3 Upgraded 3D Printer Parts

  • ⭐【Item Name】: All Metal MK8 Hotend CR10 Extruder Conversion Kit compatible with Creality Printers..
  • ⭐【CR10 Heatsink Hotend】: Strong and durable, imported aluminum quality, efficient heat transfer,Compatible with CR10S, Ender 3 Series and BIQU....
  • ⭐【Package Including】: 2 * 4mm PTFE Tube.
  • Compatible with 100K NTC 3950 thermistors.
  • Uses MK8 Nozzle and 6 * 20mm Heater Cartridge..
  • ⭐【Warm Notice】When replace the honted, should preheat the honted, setting the nozzle to 234°..
  • ⭐【Technical Support】If you have any question, please feel free to QA or tell us through Amazon, we will get back to you within 24h..
Check Stock