ReviewsPre insulated Copper Tube

QLOUNI 80Pcs 7-21mm 304 Stainless Steel Single Ear Stepless Hose Clamps with Clamp Crimper Tool Kit,For Water Pipe, Plumbing, Automotive and Mechanical Application

  • 10T Crimping Power: Fits 1/2"(12.7mm), 3/4"(19.05mm), 1"(25.4mm) copper tubes. Our hydraulic pipe crimping tool features excellent crimping performance, offering 10 Tons compressive force, more labor-saving, and crimping pipes in seconds..
  • Changeable Dies 1/2", 3/4", 1": With ball-bearing springs inside the head, simply slide in and out to change crimping dies of different sizes. This hydraulic copper tube fittings crimper meets your various demand fast for pipe maintenance and repair..
  • Hydraulic System: The hydraulic pipe crimper is constructed of 40CR steel with punching & forging process and powder-coated treatment. It is an integral hydraulic pipe crimping tool with a standard manual hydraulic pump..
  • Easy & Reliable: Thickened and insulated handles give you a comfortable and secure user experience. Fitted with an oil return valve, this hydraulic pipe tube crimping tool will release pressure automatically when reaching the max pressure..
  • Wide Application: The hydraulic copper pipe crimping tool is suitable for copper pipes, copper fittings & joints, copper sleeves. It is widely applied in electric power, traffic, petroleum, chemical engineering, mining, metallurgy, and shipbuilding areas..
Check Stock

XUUAP 100 pcs Female Spade Connectors F2 6.3mm 1/4 16-14 AWG Blue Heat-Shrink Insulated Quick-Disconnect Electrical Crimp Terminals

  • Quick durable and reliable heat shrink insulated spade crimp-type wire connector..
  • Upgraded copper thickness: Thicker copper spade connectors can be crimped tightly on any wire. strong crimp, corrosion resistant, good electrical conductivity..
  • Insulated Heat shrinkable tube wrapped: Polyethylene(PE) heat shrink tubing has hot melt adhesive inside, Provides good sealing, insulation and vibration resistance..
  • Easy to connect and disconnect: Spades are most often used to connect wires to relays and components. Ideal for use in household electrical wire connections, trucks, automotive and marine boat repairs..
  • Compliant with ROHS, ISO 9001:2008, SGS and CE standards. Friendly after sales service: contact us for any questions..
Check Stock

3M(TM) Scotchlok(TM) Butt Connector, Heat Shrink Seamless MH10BCK, 12-10 AWG

  • Yellow pre-insulated tubing covers the connector’s seamless barrel for a stable fit.
  • Helps resist corrosion from water and salt thanks to pre-insulated adhesive-lined polyolefin construction.
  • Slides to correct position with help of built-in wire stop.
  • Appropriate for use with wires sized from 12 to 10 AWG.
  • Helps provide excellent conductivity due to electrolytic copper construction and resists corrosion thanks to tin plating.
Check Stock

3M(TM) Scotchlok(TM) Butt Connector, Heat Shrink Seamless MH14BCK, 16-14 AWG

  • Fits firmly over wires thanks to the pre-insulated, heat shrink tubing so it remains secure over time.
  • Pre-insulated polyolefin protects wires from salt and water when this connector is shrunk and crimped.
  • The built-in wire stop helps you position it correctly every time.
  • This butt connector is for wire sizes 16 to 14 AWG.
  • The electrolytic copper contributes to outstanding conductivity while the tin plating is corrosion-resistant.
Check Stock

RIDGID 62862 RT-175 Electric Soldering Gun

  • The product is 62862 TORCH, RT175 FLAMELESS 115V.
  • This product manufacture by United States.
  • Lightweight Rugged Electric Soldering Gun.
  • This Gun Sweats Joints on Copper Tube up to 3".
  • The RT-175 Can Be Operated on a Standard 115v, 15amp Outlet.
  • There is No Open Flame to Worry about Igniting Wallboard, Insulation or Studs and Joists in the Walls.
  • Easy to Operate, Just Place the Carbon Tips on the Copper Fitting and Remove When the Solder Begins to Flow.
Check Stock

HEATIT HISD 18-feet Pipe Heating Cable with Built-in Thermostat

  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
Check Stock

HEATIT HISD 15-feet Pipe Heating Cable with Built-in Thermostat

  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
Check Stock

haisstronica 76PCS Tinned Copper Wire Lugs Kit,Heavy Duty Battery Cable Lugs AWG 6 4 2 1,Battery Terminals Connectors with 3:1 Heat Shrink Tube

  • 76PCS TINNED BATTERY CABLE ENDS KIT:This 3/8",5/16" ring eyelets copper ring terminals kit includes 36pcs battery terminals will work with 8,6,4,2gauge wires.40pcs 3:1 heat shrink tube(red/black)..
  • APPLICATION:Wiring projects such as Christmas lights,ships with high waterproof requirements,off-road vehicles,ship bottom pumps, lawn tractors,RVs,fish finder,etc.We offer a 30-day money-back guarantee,and a 12-month replacement warranty giving customers a 100% Satisfaction Guarantee for risk-free purchases!.
  • EXCELLENT CRAFTSMANSHIP COPPER RING TERMINALS:The flaring design of the battery terminals makes it easy to insert the wires and complete the crimping and can firmly crimp the cable.UL tested for TOP safety..
  • HIGH AMPERAGE APPLICATIONS:Haisstronica heavy-duty pure copper battery cable lug ends.Thick and sturdy.Manufactured using 100% pure annealed copper with strong and reliable electrical conductivity.It is an excellent choice for any demand for heavy-duty high amperage connectors..
  • 3:1 HEAT SHRINK TUBING:The high-quality adhesive-lined heat shrink tube forms a safe and flexible protective layer.Provide great insulation..
Check Stock

HEATIT HISD 12-feet Pipe Heating with Built-in Thermostat, Black

  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
Check Stock

MUJI Bento/Lunch Box Aluminium Small Oval

  • Safe Food Jar Stainless Steel -- BPA free, no PVC, 304 stainless steel, food grade material. Please enjoy this hot food jar without any worries..
  • Vacuum Insulation Technology -- Double wall stainless steel, besides, great copper coated insulation and seamless welding technology, great beautiful....
  • Long Time Insulation -- Important Tips: Please pour in hot & cold water to preheat & pre-cool for 5~10 minutes before packing food. Keeps liquids hot....
  • Wide Mouth with Spoon -- The extra wide mouth can help you easy eating with the shipping stainless steel folding spoon, also easy to fill food into....
  • Double Lids Design -- The food grade material outer lid can be used to hold food, also be greater for insulation and leak proof, you will like the....
Check Stock

Bosch Automotive (7905) Copper with Nickel Spark Plug - Single

  • Heavy-duty nickel center electrode ensures longer life than standard copper plugs.
  • Copper core provides better heat transfer for resistance to pre-ignition and fouling.
  • Metal glass fused resistor maximizes interference suppression.
  • Ribbed insulator design prevents misfire due to current leakage.
  • Nickel-plated rolled threads provide superior resistance to corrosion and do not require anti-seize.
Check Stock