ReviewsPrecise Fit Tail Light Assemblies

Gilson SS-15F Economy Sieve Shaker, 230V, 50 Hz, 11\ Length, 17\ Width, 30\ Height

  • Continuous or timed shaking up to 60 minutes in one-minute increments for ease of operation.
  • Adjustable mixing angle between 0 to 15˚ for precise results.
  • Rotary dial controls and amplitude adjustment arm for accurate mixing.
  • Side-arm assemblies with adjustable finger clamps holds eight 500mL or smaller flasks.
  • The Boekel 401000-2 Flask benchtop analog shaker uses 230V at speeds between 0 to 450 oscillations per minute, and has continuous or timed shaking, an adjustable mixing angle, and side-arm assemblies. This shaker reproduces the back and forth action of the human wrist. The unit has continuous or timed shaking up to 60 minutes in one-minute increments for ease of operation. An adjustable mixing angle between 0 to 15˚ provides precise results from a gentle swirl to vigorous agitation. Rotary dial controls and an amplitude adjustment arm provide accurate mixing. Two side-arm assemblies (included) hold eight 500mL or smaller flasks with adjustable finger clamps that can accommodate 1⁄4 to 2" diameter tubes and vessels. The shaker comes with a power cord, instructions, and two Allen wrenches: one 5/32" wrench for side arm installation and one 3/16" wrench for clamp adjustment. Laboratory shakers are used in many analytic procedures, including drug ....
Check Stock

DTR2017 Smoked LED Tail Light, Integrated Motorcycle Rear Brake License Plate Lights for Harley Dyna, Road King, Street Glide, Sportster 1200, Softail and Touring

  • Package includes 2 Pieces UTV tail lights Replacement for Polaris Ranger 570 900 1000 / Brutus HD / General rear tail lights. This new Led tail light can directly replace your stock tail light and fit both your driver side and passenger side. Replacement for Part Number: 2412774.
  • Each UTV tail light has 14 piece high quality 3528 LED chips with more than 30K working hours, two step lighting and can work as both running light/tail light and brake stop light.
  • Compatibility of the Rear tail light: Compatible with Polaris Ranger 570 full size tail light/Ranger 900 tail light/Ranger 1000 tail light/Compatible with Ranger Brutus HD tail light/Compatible with Polaris Ranger XP 1000 tail light/Compatible with Polaris Ranger XP 900 tail light/Compatible with Polaris Ranger Crew XP 1000 tail light/Compatible with Polaris Ranger Crew XP 900 tail light/Compatible with Polaris Ranger Crew 570 tail light/Compatible with Polaris Ranger Diesel tail light etc..
  • This tail light has some difference form the stock tail light. It does not have the reflective sticker on the side that your stock tail lamp has. Of course you can use the 3-M reflector tape for it. Also this tail light assembly does have inserts for bolts. You will need to ch....
Check Stock

WOLFSTORM Tail Light Assembly Fit for 2014-2018 Chevy Silverado 1500 and 2015-2018 Chevy Silverado 2500/3500HD,Not Fit Silverado with Factory LED Tail Light,1 Pair(Smoke Lens)

  • ✅FIT FOR:This led tail light assembly replacement fit for 2014 2015 2016 2017 2018 Chevy Silverado without any modification: NOTE: Not fit Silverado with factory led tail light..
  • ✅PERFORMANCE:This chevy silverado led tail light have the special design,have a unique visual effect make your silverado more charming..
  • ✅INSTALLATION:This silverado tail light install easily,have the fixed bracket to match,have the plug to connect with the vehicle original plugs..
  • ✅DIFFERENT:LED tail light assembly produced need many progress include the waterproof test and the lifetime of the whole light..
  • ✅CONFIDENCE:We are not only a seller, but also the manufacturer of vehicle lights for many years.If you are not satisfied,you could return free in 30 days and warranty for 12 months.
  • ✅DOT(US Department of Transportation)&SAE(US Society of Automotive Engineers) DOT/SAE COMPLIANCE:DOT(US Department of Transportation)&SAE(US Society of Automotive Engineers) ,this chevy silverado tail light assembly meet the street legal..
Check Stock

DWVO Taillights Tail Lamps Compatible with 2000 2001 2002 2003 2004 2005 2006 Chevy Suburban Tahoe GMC Yukon SLT (XL) Black Smoke (Do Not Fit Barn Door Models - ONLY FITS LIFT GATE MODELS)

  • Vehicle fitment: compatible with 2000-2006 Chevy Suburban/2000-2006 Chevy Tahoe/2000-2006 GMC Yukon SLT/2000-2006 GMC Yukon XL SLT. 1-YEAR WARRANTY.
  • Weather-tight construction: this pair of waterproof tail light assemblies are hermetically sealed to prevent moisture from getting trapped inside the housing.
  • the one-way vent ensures the condensation is expelled out.
  • Impact-resistant housing: the rugged weather-proof housing is thoroughly tested to ensure exceptional resistance to vibration, moisture, dust, UV, etc, delivering years of dependable performance and durability.
  • Functional for safe driving: the one-piece polycarbonate lens and metal plating improve lighting capabilities.
  • the sided safety reflector makes it easier for whose behind to see you and keep a safe distance.
  • Note: professional installation would be highly recommended and make sure the OE bulbs are in the center of tail lamps socket to avoid oblique bulbs melting the housing (taillight bulbs not included).
Check Stock

MZS Tail Light LED Integrated Turn Signal Blinker Smoke Compatible with CBR1000RR CBR 1000RR FIREBLADE 2008-2016

  • NOTICE - This is an aftermarket parts, not an OEM part, it will fit the models listed. Before purchase, please make sure it will fit your model and....
  • HIGH QUALITY COMPONENTS - MZS tail light use high quality ABS injection molded housing and UV protected lens element..
  • ADVANTAGE - The integrated LED Tail Light with Turn Signals have waterproof, dustproof, durable and high toughness..
  • ALL IN ONE - This tail light can be used as running light, brake light, turn signal light(turn left/right), Dual mode red/yellow LEDs, is used to....
  • INSTALLATION - Original tail lights have 7 wires inside and LED only have 5 wires, if connected the wrong one to make the light not light. So before....
Check Stock

Xprite Tail Light Covers Compatible with 2007-2018 Jeep Wrangler JK & JKU Unlimited, Guards for Rear Taillights Black Light Cage, Pair

  • 【HEAVY DUTY MATRIEL】Black tail light covers made of full polished stainless steel for stability and strength, have a high quality powder protective coating that resists rust and dirt ..
  • 【PROTECR TAILLIGHT】The rear taillight cover perfect fit your vehicle taillight, keeps the tail lights safe from damage. Enjoy the off-road feeling to the fullest..
  • 【EASY INSTALLION】No drilling required, no cutting required to install, install directly on the rear tail light of your car with screws for a perfect fit..
  • 【ADD A DIFFERENT LOOK】Xprite tail light cover changed the look of the rear end, more stylish and unique style for your car..
  • 【PERFECT FIT】Xprite black light guard for rear taillights cover compatible with 2007-2018 Wrangler JK & Wrangler Unlimited (One Pair) ..
Check Stock

Nilight - TL-07 6 Inch Oval Red Led Trailer Tail Lights 4PCS 10 Led with Flush Mount Grommets Plugs IP67 Waterproof Stop Brake Turn Trailer Lights for RV Truck

  • Awesome Brightness: Each tail light has 10 PCS high-quality SMD LEDs to output super bright red light, high brightness of Turn/Brake light, low brightness for Taillight, improving visibility and ensuring you a safer night.
  • Easy Installation: The taillight comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire. For installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. Hole size for surface mount is: 6. 6” x2. 5” x 1. 75”".
  • Upgraded Unique Design: Nilight's tail light has unique “ears” on its two sides, upgrade notches on the inside of grommet, and a tighter attaching ability between 3-prong plug and it. These help the light fit perfectly and firmly on the grommet, and the 3-prong plug attaches tightly on the light. Shake proof, there will be no worries of loosing light or wiresUpgraded Unique Design: Nilight's tail light has unique “ears” on its two sides, upgrade notches on the inside of the grommet, and a tighter attaching ability between the 3-prong plug and it. These help the light fit perfectly and firmly on the grommet, and the 3-prong plug attaches tightly to the light. Shake proof, there will be no worries....
Check Stock

2014-2019 C7 Corvette Morimoto Aventador-Style LED Tail Lights

  • Awesome Brightness: Each tail light has 10 PCS high-quality SMD LEDs to output super bright red light, high brightness of Turn/Brake light, low brightness for Taillight, improving visibility and ensuring you a safer night..
  • Easy Installation: The taillight comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire. For installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. Hole size for surface mount is: 6. 6” x2. 5” x 1. 75”.
  • Upgraded Unique Design: Niligh's tail light has unique “ears” on its two sides, upgrade notches on the inside of grommet, and a tighter attaching ability between 3-prong plug and it. These help the light fit perfectly and firmly on the grommet, and the 3-prong plug attaches tightly on the light. Shake proof, there will be no worries of loosing light or wires.
  • Ready For The Weather: Be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack.
  • Universal Application: Work on a 12 V DC system, function as turn/Brake light, tail light for all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, etc. Just m....
Check Stock

Tail Light [Eagle Claw Design] DOT Approved Brake Running Lights Motorcycle LED Taillight Compatible with Harley Sportster Dyna Softail Touring Road Glide Road King 1 PCS

  • 【EAGLE CLAW DESIGN】New and cool led tail light lay down style. Black with red lens, clear protective cover. The back shell of motorcycle led tail....
  • 【LIGHTING MODE & SPECIFICATIONS】Red(running), Bright red(brake), White(license plate), The tail light comes with Osram led chips, voltage - DC 12V....
  • 【EASY INSTALLATION】It's easy to install the led tail light. Wire connection: black-ground, blue-running light, red/yellow-brake light, Insert the....
  • 【REFUND IF NOT APPLICABLE】Fitment: [Sportster] XL1200C Custom(1999-2006), Custom (EFI) (2007-2010), XL 1200S sport(2000-2003), XL883 (2004-2006),....
  • 【PACKAGE INCLUDED】1 Pcs tail light + 1 Pcs electrical connector. 12 months warranty. SHOP WITH CONFIDENCE: (1) Not fit for your vehicle= Return it....
Check Stock

Free All Rust Eater Deep Penetrating Oil, 11 oz Aerosol

  • Penetrates rust, scale and corrosion to free parts and assemblies instantly.
  • Loosens red and white lead, tar, grease, carbon and graphite deposits.
  • Will free up all threaded pipe connections, rusted machine screws, bolts, nuts, clamps for mufflers and tail pipes, pillow blocks, universal joints and locks.
  • Contains no silicones, making it safe in paint and shop environments.
  • No more torching, drilling, hammering or chiseling.
Check Stock

Adjustable Motorcycle License Plate Mount Holder Bracket- Universal Fold License Plate Tail Light Holder

  • Wide Application: The rear tail light license plate holder is perfect suitable for dual sport applications, dirt bike, ATV or youth monkey bike. This holder can mount with tail light(not included) & regular license plate.
  • Universal Design: Tail light license plate holder will fit all motorcycles with conventional rear fender. Professional manufacturing, high characteristic and stable performance.
  • Premium Quality: Made of premium aluminum alloy material, this adjustable tail light license plate holder is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • Easy Installation: Simplify installation steps, no modification, cutting, or drilling required. This is a perfect choice if you are in need of folding tail light license plate holder kit.
  • What You Will Get: We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care! If you have any issue about the item, please contact us by e-mail, we will try our best within 24 hours to reply.
Check Stock