ReviewsPrecise Lathe Process Part

Meinl 15\ Hihat (Hi Hat) Cymbal Pair - Classics Custom Dark - Made in Germany, 2-YEAR WARRANTY (CC15DAH)

  • 15” Classics Custom Dark hihats — when playing these hihats closed, you get all of the definition you need for blazing singles and doubles — playing the hats open sends out a powerful crashing effect to drive through distortion charged amps.
  • Dark finish with extra hammering — a highly specialized finishing process leaves these cymbals with shadowy tones and plenty of volume — extra deep hammering adds complexity to their character by shaping warmth and dryness into their intense attack.
  • Explosive cymbals for power players — Classics Custom Dark cymbals open up to deliver an energetic drive at loud dynamics, making them a sure bet for high octane styles like rock and metal.
  • Made from B10 bronze alloy — consisting of 90% copper and 10% tin, B10 bronze has a uniform sound that packs a punch and cuts through dense mixes easily — the natural color of the bronze comes through in the lathe marks that accent the dark finish.
  • A finish unlike any other — the dark finish is a part of the cymbal making process, not just a coating that can wear off overtime — the look will last a lifetime of playing, traveling and buffing (for those of us who want our gear looking brand new).
  • Made in Germany with 100% renewable energy — Classics Custom Dark cymba....
Check Stock

Rockwell Delta 11' Wood Lathe Spindle Bearings Set of 2, SP-5360, Later 46-111 Models

  • Brand new wood lathe live center and spur center.
  • Enjoy true accurate wood turning on your wood lathe with no messy lubricants to stain or burn your project.
  • Please, check your part number before purchase.
  • Follow the safety guidelines when installing parts.
Check Stock

TECHTONGDA Inch Thread Metal Lathe 7X12\ Precision Bench Lathe 600W Brushless Motor Turning Machine

  • [Professional Lathe]: Techtongda lathe is used for turning, facing, drilling, boring and turning thread. Also can be used for precision parts processing, sample processing and model processing. With extensive use, simple operation and extensive processing..
  • [600W Brushless Motor]: The newly upgraded 600W brushless motor not only gives more power but also saves you the trouble of replacing the brush..
  • [All Metal]: All the gears are made of metal and the spindle is supported by precision taper roller bearing. High quality materials make its service life longer..
  • [Safety First]: The lathe is equipped with emergency stop switch and overload protection device, which can better protect the operator in emergency..
  • [Infinitely Variable Speed]: This lathe allows both forward and reverse, with the spindle speed can be adjusted in the range of 50-2500rpm which give you the convenience to process the workpiece at will..
Check Stock

Mophorn K72-100 Lathe Chuck 4 Inch 4-Jaw,Lathe Chuck Independent Reversible Jaw,Metal Lathe Chuck Turning Machine Accessories,for Lathes Machine

  • Premium Material: Diameter: 100 mm (3.93 in). The 4-jaw mini lathe chuck body is made of cast iron that has passed rigorous quality tests. So it is rigid and durable..
  • Reversible Jaw Set: The lathe chuck is equipped with four reversible jaws that can be stepped inward or outward to hold raw materials of different sizes..
  • Enhanced Flexibility: The T chuck key of the lathe part allows the installation of various workpieces. And easy operation reduces changeover time for your convenience..
  • Of High Precision: The 4-jaw lathe chuck works accurately, bearing tolerance of ≤0.07 mm (0.003 in) to ensure satisfying metal processing..
  • Remarkable Versatility: This chuck has a compact construction. It is suitable for installation on a metal lathe chuck and clamping workpieces of various shapes..
Check Stock

On The Art Of Cutting Metals (Home Shop Machinist Book 1)

  • MINI YET MIGHTY: Only 30x12 inches, this CO-Z mini metal lathe still cranks out 600W (0.8 hp) and is great for handling small to medium projects.
  • it provides an 8.3 inch (21 cm) swing over bed and 13.8 inch (35 cm) distance between its centers with a 0.8 inch (21 mm) spindle bore.
  • PRECISE ENGINEERING: Ideal for professionals, this mini metal lathe's high-precision 4-inch 3-jaw chuck handles both square and round objects with equal aplomb.
  • its granular precision is especially useful for jobs requiring high accuracy such as threading.
  • COMPLETE CONTROL: The lathe's rotational speed can be set from 50 to 2250 rpm and monitored through the digital display.
  • the well-crafted head and tailstocks, large through-hole, and 4-way tool post also contribute to providing greater control of your work.
  • ULTRA-STURDY & SAFE: The all metal construction assures you of a long service life.
  • the transparent chuck guard protects you from swarf or broken tools while also permitting visibility into the point of operation.
  • WIDE APPLICATION: This mini woodworking lathe from CO-Z comes suitable for many processing tasks needing extreme precision, including turning, drilling, threading, and cutting.
Check Stock

Meinl Cymbals Classics Custom Dark 12\ Splash Cymbal — Made in Germany — for Rock, Metal and Fusion, 2-Year Warranty (CC12DAS)

  • ...s Custom Dark splash cymbal — the Classics Custom Dark splash is a top choice for players who want a dark sounding, heavier rock splash that speaks up without high pitch overtones — great cutting attack on the front end without a glassy sustain.
  • Dark finish with extra hammering — a highly specialized finishing process leaves this cymbal with shadowy tones and plenty of volume — extra deep hammering adds complexity to its character by shaping warmth and dryness into its intense attack.
  • Explosive cymbals for power players — Classics Custom Dark cymbals open up to deliver an energetic drive at loud dynamics, making them a sure bet for high octane styles like rock and metal.
  • Made from B10 bronze alloy — consisting of 90% copper and 10% tin, B10 bronze has a uniform sound that packs a punch and cuts through dense mixes easily — the natural color of the bronze comes through in the lathe marks that accent the dark finish.
  • A finish unlike any other — the dark finish is a part of the cymbal making process, not just a coating that can wear off overtime — the look will last a lifetime of playing, traveling and buffing (for those of us who want our gear looking brand new).
  • Made in Germany with 100% renewable energy — Classics Custom Dark cymbals a....
Check Stock

Hurricane Turning Tools, HSS, 3 Piece Bowl Gouge Set (1/4\

  • ...,square arcs(3)easy to replace the head of the T15 wrench,all parts are made of special hard sponge full fitted wrap,in the box..
  • 【5 SECONDS QUICK DISASSEMBLY】 - No tools required,simply loosen the knurled chuck and insert the wood lathe tools,then screw on the collet and you can immediately go to work,the whole process takes five seconds.The wood turning tools for lathe screw self-locking collet fits snugly into the top thread,so you can experience visible robustness..
  • 【HIGH CUTTING EFFICIENCY】 - Sharp high-density tungsten wood lathe cutting edge allows you to handle any wood lightly,and is more durable than other typical carbon and high-speed steel material wood turning tools.It is less likely to deform and stick during cutting,and if the cutting edge becomes dull,simply change the direction of the cutting edge with the included T15 wrench and you will have a fresh,clean cutting edge again..
  • 【EASY TO CONTROL】 - Whether pure aluminum solid handle,or the tool bar of high-speed steel material,mirror polishing treatment to ensure that you can move on the frame without obstacles,square axis wood lathe tools and the tool frame contact is not easy to roll,1.15 pounds of solid aluminum bar handle to minimize the phenomenon of warping,the handle o....
Check Stock

CREWORKS Mini Metal Lathe 8\×16\ 1100W 1.5HP Metal Gear Brushless 2250RPM 2 Chucks

  • MINI YET MIGHTY: This Creworks mini metal lathe still cranks out 1100W (1.5 hp) and is great for handling small to medium projects.
  • it provides an 8.3 inch (21 cm) swing over bed and 16 inch (40 cm) distance between its centers with a 1.5 inch (38 mm) spindle bore.
  • PRECISE ENGINEERING: Ideal for professionals, this mini metal lathe's high-precision 5-inch 3-jaw chuck handles both square and round objects with equal aplomb.
  • its granular precision is especially useful for jobs requiring high accuracy such as threading.
  • COMPLETE CONTROL: The lathe's rotational speed can be set from 50 to 2250 rpm and monitored through the digital display.
  • the well-crafted head and tailstocks, large through-hole, and 4-way tool post also contribute to providing greater control of your work.
  • ULTRA-STURDY & SAFE: The all metal construction assures you of a long service life.
  • the transparent chuck guard protects you from swarf or broken tools while also permitting visibility into the point of operation.
  • WIDE APPLICATION: This mini woodworking lathe comes suitable for many processing tasks needing extreme precision, including turning, drilling, threading, and cutting.
Check Stock

Meinl Cymbals Classics Custom Heavy Dark 18\ Big Bell Ride — Made in Germany, 2-Year Warranty (CC18HBBDAR)

  • 18” Classics Custom Heavy Dark big bell ride — an extra large bell dominates this ride with a heavy metal sound punctuated by a darker mosaic for power players who need a heavy metal ride that cuts with a shadowy tone.
  • Dark finish with extra hammering — a highly specialized finishing process leaves these cymbals with shadowy tones and plenty of volume — extra deep hammering adds complexity to their character by shaping warmth and dryness into their intense attack.
  • Heavy weight — the heavier weight gives Classics Custom Heavy Dark cymbals an added dose of power, punch and articulation for harder hitting players that rely on more volume from their cymbals.
  • Explosive cymbals for power players — Classics Custom Dark cymbals open up to deliver an energetic drive at loud dynamics, making them a sure bet for high octane styles like rock and metal.
  • Made from B10 bronze alloy — consisting of 90% copper and 10% tin, B10 bronze has a uniform sound that packs a punch and cuts through dense mixes easily — the natural color of the bronze comes through in the lathe marks that accent the dark finish.
  • A finish unlike any other — the dark finish is a part of the cymbal making process, not just a coating that can wear off overtime — the look will last a ....
Check Stock

PSI Woodworking PKLPRESS Between Centers Pen Press for Lathe Woodturning Projects

  • Assemble your pen making parts together directly on your lathe with this standalone press.
  • Requires a #2 morse taper opening on your lathe's headstock and tailstock spindle.
  • Headstock end part is spring-loaded with hard plastic to protect pen components.
  • Center hole on the plastic face to secure the pen nib while pressure is being exterted from the tailstock end.
  • Ideal for most penturning and woodturning projects that require parts to be pressed togther.
  • Maximum workpiece length depends on your lathe's distance between centers.
Check Stock

10Pcs Center Drill Bit Set High Speed Steel 4341 Straight Shank Center Drill Bit Combo Drilling Tools 2.5mm for Hole Processing

  • ★High Precise Positioning: This high speed steel center drill bits is mainly used for the prefabricated precise positioning of hole machining, guiding twist drills for hole machining, thereby effectively reducing errors.
  • ★Used for: Use a center drill to make a conical hole for the center of the lathe as a starting point for a standard twist drill. Can be used as a starting hole to prevent the drill bit from deviating from the original route. Used for center cages that need to be processed between parts or workpieces.
  • ★High Performance: This center drill bit is made of high‑quality high-speed steel material, with high hardness and good wear resistance, strong and durable, has a long service life. With good applicability, stability, high processing efficiency, long life expectancy, etc..
  • ★Widely Used: This center countersink drill bit are good for most general purpose applications, which can not only be used on a lathe, but also can be installed at the end of the workpiece in the center of the lathe.
  • ★Note: Please allow slight error due to manual measurement. Thanks for your understanding.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
Check Stock