ReviewsPrecise Nozzle Temperature Control

Hose Nozzle Garden Hose Nozzle Hose Spray Nozzle Thumb Control with 8 Adjustable Patterns Hose Sprayer Hose Nozzle Sprayer Water Hose Nozzle for Cleaning, Watering Garden, Washing Cars, Bathing Pets

  • 【ANTI-SLIP & ANTI-FALL HOSE SPRAYER】 The hose nozzle is ergonomic humanized control design, soft rubber coated handle enable this garden hose nozzle to be used for a long time without getting tired. The handle of the hose spray nozzle is coated with soft ABS, not only to insulate the hand from the temperature of the water, but also played a role in anti-skid. When the water hose nozzle sprayer accidentally falls down, it also plays a role of anti-fall and increases the life of the hose nozzle..
  • 【LEAK-FREE & SAVE WATER】 No adapters necessary! When you buy this hose nozzle, you can use it directly. Equipped with rubber gasket washers, it can provide an extreme water-tight seal, make the hose spray nozzle leak-free and save unnecessary water. One piece design of this garden hose nozzle and internal rubber o-ring washers provides a durable tight seal to eliminate leaks. This hose sprayer provides an ideal combination of comfort and durability, now hurry to bring the hose nozzle home..
Check Stock

Hose Nozzle Hose Sprayer Garden Hose Nozzle Thumb Control Hose Spray Nozzle Heavy Duty with 8 Patterns Water Hose Nozzle Sprayer Hose Nozzles in Lawn and Garden for Cleaning, Watering, Washing

  • 【ANTI-SLIP & ANTI-FALL HOSE SPRAYER】 The garden hose nozzle is ergonomic humanized control design, soft rubber coated handle enable this hose nozzle to be used for a long time without getting tired. The handle of the hose spray nozzle is coated with soft ABS, not only to insulate the hand from the temperature of the water, but also played a role in anti-skid. When the water hose nozzle sprayer accidentally falls down, it also plays a role of anti-fall and increases the life of the hose nozzle..
Check Stock

Paper Lanterns

  • ▶ 【Strong Power With 2 Modes】 SEEKONE 1800W heat gun provides strong power quickly heat up to 1202℉(650℃) in 1.5 seconds. Two modes: I: 50-450℃, 190-210L/min.
  • ▶ 【Variable Temp Control & Overload Protection】 Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 122℉ to 1202℉.
  • Our heat gun also possess overload protector to avoid damaging your heat gun and circuit.
  • ▶ 【Scientific Ergonomic Design & Wide Applications】 Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders.
  • Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose.
  • ▶ 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface.
  • Two concentrator nozzles direct a concentrated heat flow to the work surface.
  • Reflector nozzle disperses heat flow evenly around the whole work surface..
Check Stock

Wagner 0529085 FLEXiO 3000 HVLP Paint Sprayer

  • X-Boost power dial with 9 settings for various coatings & precise control.
  • 1-1/2 Qt cup covers up to a 10 Ft. x 12 Ft. wall in one fill also comes with Detail Finish Nozzle - for small projects & a smooth finish.
  • Material adjustment with numbered settings.
  • Cleans up in 5 minutes and comes with sturdy carrying case for easy storage.
Check Stock

Enertwist 1500W Dual Temperature Heat Gun Kit with 4 Nozzle Attachments for Shrink Wrapping, Paint Removal, Rusted Bolt Stripping, Wire Shrinking, Crafting, ET-HG-1500R

  • ★ Dual Temperature★ 2 Temp settings 662℉& 1112℉(350℃ & 600℃) features High/ Mid/ Off control [ II: 500 L/min,I: 300 L/min, Off] can satisfy all your utility..
  • ★ Powerful & Reliable★ Heavy duty heating gun with 12.5 Amp motor heats up to maximum temperature 1112℉(600℃) quickly in few seconds and performs stable. Professional heater gives outstanding performance by keeping running 500 hours in max temperature (data from lab)..
  • ★ Ergonomic & Safety★ Ergonomic design for comfort and balance to reduce fatigue, integrated hands free support stand allows the gun sit upright for safe hand-free operation. With professional built-in overload protection prevents hot air gun from over heating due to misuse..
  • ★ Versatile Accessories★ 4 Nozzle deflectors extend heat gun utility, Reduction nozzle for welding plastics, solering/ de-soldering, shrink wrapping, loosening seized bolts & nuts. Glass protection nozzle for paint removing or adhesive stripping neat heat-sensitive materials. Wide jet surface nozzle for paint or adhesive removal. Reflector nozzle for heat shrinking tubing, shaping PVC tubes, thawing frozen pipes..
  • ★ What You Get★ Enertwist Electric heat gun and 4 nozzle attachment kit, user manual, warranty card. Any Issues kindly....
Check Stock

Tattoos

  • ... nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing temperature and minimize the risk of printing errors. In addition, the printers kit has a layer resolution of up to 0.05 mmr, guarantees the accuracy of the print model. Dual fans provide better heat dissipation for faster and more even modeling.(Note: This mini 3D printer doesn't have the Resume Print Function, if there is a power failure it will print from the beginning .).
  • ✪【FAST HEATING AND PRINTING】: X1 printers machine are much easier to use for beginners. It comes with a unique key system that allows you to start, stop and easily control the printing process. The nozzle is heated evenly, it only takes 5 minutes, and the temperature of the nozzle can reach 180 degrees, which can meet the temperature requirements of the PLA material pressure. (Do not touch the nozzle with your hands, if the nozzle has excess filaments, please remove it with the help of other tools).
Check Stock

Wagner Spraytech 0529013 Detail Finish Front End Kit, Fine, Applies a Fine Finish on Furniture, Cabinets and Trim, Use with most Wagner HVLP Sprayers

  • FINE FINISHING FRONT END NOZZLE: The Detail Finish Front End nozzle accessory provides a smooth finish without brush marks. This is perfect for fine finishing projects like trim, cabinets and furniture.
  • DESIGNED FOR WAGNER PAINT SPRAYERS: This nozzle attachment can be paired with Wagner HVLP sprayers including all FLEXiO Sprayers, PaintREADY Sprayer, PaintREADY Station, Control Painter, Control Spray Double Duty and Control Spray Max.
  • FOR USE WITH THIN COATING MATERIALS: Can be used with water or oil based materials such as paints, stains, sealers, and polyurethane coatings. Thinning may be required for thicker materials.
  • ADJUSTABLE PATTERN SETTINGS: This front end features an adjustable flow control knob for precise spraying to match your speed and project needs. The sprayer also features three spray patterns (horizontal, vertical, and round) to suit any project.
  • EASY TO ASSEMBLE WITH SPRAYER: Exclusive Lock-n-Go technology allows users to quickly change front ends for color changes and easy disassembly for clean-up.
Check Stock

Assark Glue Gun Mini Hot Glue Gun Kit with 30 Glue Sticks for School Crafts DIY Arts Quick Home Repairs 20W Blue

  • 【Super-Fast Heating】: This Glue Gun takes 3 to 5 minutes to warm up and fits for 7mm-diameter glue sticks, keeps the temperature constant automatically..
  • 【Anti-drip and Heat Resistant】: Thermal Insulated Cap on glue gun is covered by heat-resistant rubber to prevent burns. Anti-drip nozzle releases glue smoothly with no drips or glops and is easy to control and place a small amount of glue..
  • 【Easy to Use and Operate】: Press the trigger of glue gun to release melted glue, safety fuse offers overheating protection. The Longer Anti-drip nozzle allows you to be more precise when it comes to hot glueing something..
  • 【Ultimate Convenience and Safe】: This glue gun has the Fold-up holder and it makes the glue gun stand steady on bench top for better use. The on and off power switch makes it safe for your children..
  • 【Set Creativity Free】: This mini glue gun is capable of bonding multiple materials together, which is ideal for DIY crafts and arts with unlimited imagination and endless fun..
Check Stock

The Cheap Detective

  • ... nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing temperature and minimize the risk of printing errors. In addition, the printers kit has a layer resolution of up to 0.05 mmr, guarantees the accuracy of the print model. Dual fans provide better heat dissipation for faster and more even modeling.(Note: This mini 3D printer doesn't have the Resume Print Function, if there is a power failure it will print from the beginning .).
  • ✪【FAST HEATING AND PRINTING】: X1 printers machine are much easier to use for beginners. It comes with a unique key system that allows you to start, stop and easily control the printing process. The nozzle is heated evenly, it only takes 5 minutes, and the temperature of the nozzle can reach 180 degrees, which can meet the temperature requirements of the PLA material pressure. (Do not touch the nozzle with your hands, if the nozzle has excess filaments, please remove it with the help of other tools).
Check Stock

Introduction to Play Analysis

  • ... nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing temperature and minimize the risk of printing errors. In addition, the printers kit has a layer resolution of up to 0.05 mmr, guarantees the accuracy of the print model. Dual fans provide better heat dissipation for faster and more even modeling.(Note: This mini 3D printer doesn't have the Resume Print Function, if there is a power failure it will print from the beginning .).
  • ✪【FAST HEATING AND PRINTING】: X1 printers machine are much easier to use for beginners. It comes with a unique key system that allows you to start, stop and easily control the printing process. The nozzle is heated evenly, it only takes 5 minutes, and the temperature of the nozzle can reach 180 degrees, which can meet the temperature requirements of the PLA material pressure. (Do not touch the nozzle with your hands, if the nozzle has excess filaments, please remove it with the help of other tools).
Check Stock

Iwata-Medea High Performance Plus C Dual Action/Large Gravity Feed Cup

  • Dual-purpose, cutaway and pre-set handle for easy clean up and precise control of paint flow.
  • Larger threads on the nozzle offer a more secure fit and better centering of the nozzle.
  • Single-piece auxiliary lever/needle-chucking guide provides easy assembly.
  • Its larger 1/3 oz (9 ml) gravity-feed cup and larger (0.3-mm) needle/nozzle configuration allow for use with most media. Hairline to 1" (25-mm) Round Spray Pattern.
  • The gravity-feed cup is useful for mixing custom colors and allows for quick color changes.
Check Stock