ReviewsPrecise Printing Surface

Superhero Phone Case Compatible with iPhone 12 & iPhone 12 Pro Case 6.1 Inch TPU Soft Slim Protective Back Cover

  • Precise Fit: Compatible With Iphone 12 / Iphone 12 Pro (6.1 Inch). Precise Cutouts Ensure Easy Access To All Buttons, Ports, Speaker, Camera And Other Openings.
  • Shockproof & Anti-Scratch: Made Of Impact-Resistant And Flexible Tpu, This Case Protects Your Cell Phone Against Scratches And Bumps Without Adding Bulk To Your Phone.
  • Clear Cartoon Pattern: Cute And Personality Phone Case. Made With An Unique Printing Technique, No Rub Off, Fade Or Smudge.
  • Lightweight: The Thin, Slim Case Ensures Lightweight Portability. Comfortable To Touch. Its Raised Edges Keep Screen And Camera Lifted To Prevent Surface Scratches.
  • Wireless Charging: Compatible With Wireless Charging Devices. You Can Charge It Even When You Don'T Want To Plug It In.
Check Stock

The Greater of Two Evils: Mystery Thriller (Crime by Design Book 3)

  • [IDEAL COMPATIBILITY] Designed specially ONLY for iPhone 13 Pro Max. Not fit other models from iPhone series. Package Include: 6.1" iPhone 13 Case x 1, Glass Screen Protector x 1.
  • [PERFECT PROTECTION] No longer worry about drops/bumps/shocks your iphone in daily usage thanks to the impact-resistant TPU backing and the soft bumper edge which can keep your iPhone safe and sound..
  • [UNIQUE DESIGN] Raised edges keep screen and camera lifted to prevent surface scratches and smudges. High-Grade TPU material resist dirt and sweat efficiently, ensure long lasting clarity and prevent yellowing over time..
  • [ADVANCED PRINTING] High-quality printing technology makes the cute pattern vivid and uneasy to fade away..
  • [EASY TO USE] Precise cutouts ensure easy access to the charging port, headphone jack, volume buttons and silent button, perfect fit for your phone. Durable TPU material is lightweight and prevents the iPhone slip from your hand..
Check Stock

ELEGOO 3D Printer Neptune 2 FDM 3D Printer with Silent Motherboard, Safety Power Supply,Resume Printing and Removable Build Plate, Impresora 3D with 220x220x250mm Printing Size

  • 【Filament Detection】Aries is equipped with a filament runout sensor. Running out of filament during printing no longer ruins a job, your print will pause until you load the filament and resume. Aries 3d printer with 4.3in colorful touch screen, simply click the touch screen to achieve precise printing, giving you a better 3D printing experience!.
  • 【Industrial Structure】Aries follows the Creator and Guider design concepts and has an outstanding industrial structure, which it’s different from DIY 3D printer structure. It is more stable and accurate when you print large models, the printing size is 200×200×200mm..
  • 【Intimate Design】LED lights design illuminates your printing field of vision, allowing you to easily monitor your printing work. Double Z-axis driver ensures more stable and more precise printing quality. Resume printing after power outage or other unexpected stoppage..
  • 【Out of Box to Print】Enjoy 3D print fun right out of the box. After unboxing, you can start printing in just 3 steps: 1, Install glass build platform. 2, Assemble filament spool. 3, Insert the filament to extruder ptef tube..
  • 【After-sale Service】All Voxelab 3d printers are provided lifetime technical assistance. If you have any questions regarding product ope....
Check Stock

CREALITY Ender 3 S1 3D Printer (Upgraded Ender 3 V2) with Sprite Dual-Gear Direct Drive Extruder CR Touch Auto Bed Leveling Silent Board Filament Sensor Dual Z-axis High Precision 8.6x8.6x10.6inch

  • Sprite Direct Dual-Gear Extruder: The "Sprite" direct dual gear extruder developed by Creality 3D has two chrome steel gears that are switched with a gear ratio of 1: 3.5. With a force of up to 80N, the extruder achieves a smooth and even feed and extrusion of filaments without slipping and is ideal for printing flexible filaments such as TPU. With a weight of only 210g, the "Sprite" is lighter than other direct extruders and is characterised by lower inertia and more precise positioning..
  • CR Touch Auto Bed Levelling: The CRTouch 16-point auto levelling technology saves you from the effort of manual levelling. The intelligent levelling system automatically compensates for the print height of various points on the heated bed..
  • Removable PC Spring Steel Platform: The innovative printing platform is a combination of a PC coating, a spring steel plate and a magnetic plate that immediately adheres to the surface when it is detached. The PC coating ensures good adhesion and easy removal of the printed models by bending the surface..
  • Ultra-Quiet 32 Bit Motherboard：The brand new 32-bit silent board runs at low....
Check Stock

Large RGB Gaming Mouse Pad Spray Paint Skull Face Graffiti Cartoon Character Vector Glowing Extended Mousepad 31.5x11.8in, Soft Anti-Slip Rubber Base Luminous Mouse Mat for Pc Laptop, Gaming, Office,

  • 14 lighting effects: The gaming mouse pad provides 14 lighting effects modes, including 7 static modes and 7 dynamic modes, creating a cool gaming environment..
  • Printing design: single-sided printing. We provide a variety of styles of design patterns. Compared with the monotonous black, the rich printing patterns and lighting effects produce amazing visual art, which is very suitable for computer games..
  • Perfectly large size: 31.5x11.8in/35.4x15.7in, two large-size mouse and keyboard pads, suitable for all types of keyboards and mice, providing ample space for professional games or office work..
  • Smooth surface and non-slip rubber base: The large mouse pad has a micro-texture and smooth surface to achieve precise mouse control and smooth sliding. The durable natural rubber base firmly grasps the desktop and provides excellent desktop stability, allowing you to enjoy the ultimate experience in the most passionate games..
  • Easy to use: plug and play, no need to drive, click the switch button to turn on, long press the switch button for 3 seconds to turn off, the power-off memory function will remember the lighting mode you selected last time. Washing instructions: Do not wash with water, wipe with a damp cloth..
Check Stock

Spirit Classic Transfer Paper 8 1/2" x 14"

  • THE #1 STENCIL PAPER FOR INKJET STENCILS:Designed to be the perfect match for your InkJet Stencils system, the InkJet Stencils tracing paper is the best choice you can make for printing any artwork and transferring it to the client's skin. Custom cut to fit desktop InkJet printers, every stencil will look perfect. No jamming, no issues..
  • FLEXIBLE PAPER FOR ANY PART OF THE BODY: This tracing paper's thin and flexible design contours to the curves of the body to smoothly transfer the stencil to your client's skin. Suitable for hands, arms, legs, sleeves, backs, calves, fingers, shoulders, or any other part of the body for precise and detailed stencils..
  • GREAT VALUE PACK OF 500 STENCIL SHEETS: Perfect even for the busiest tattoo parlors and shops, these low-cost printing stencil paper packs include 500 sheets for many unforgettable tattoos. You may even print more stencils in advance and have them ready for your clients – just keep them stored on a clean, dry, and flat surface..
  • AVAILABLE IN 2 SIZES FOR SMALL & LARGER TATTOOS: Our 8.5x11" paper features the standard copy paper size - perfect for flash....
Check Stock

Aluminum 3D Printer Parts Filament Break Module Detector Sensor Run Out Pause Monitor for Creality CR-10 V3 V2 / SV03 / CR-10S Pro V2 / CR10 Max/Ender 3 Max/Ender-6 /CR-3040 Pro (Filament Sensor)

  • This 1.75mm filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing..
  • This Filament breakage sensor save your filaments when a strike occures. Its cover is made from Aluminum material, red surface treatment, looks beautiful..
  • Filament breakage detection device contains micro switch, using the principle of mechanical proximity switch, no friction, can ensure the smooth feeding of filaments..
  • Precise Detection: Blue LED indicates normal filament feed-in.
  • Blue LED turns off when filament runs out..
  • Original from Creality, can be used without any adjustment for Creality CR-10 V3 / SV03 / CR-10 V2/ CR-10S Pro /CR-10S Pro V2 / CR-10 Max /CR-10 Max /Ender-3 Max / Ender-6 /CR-3040 Pro /CR-5Pro 3D Printer.
Check Stock

Official Creality Ender 3 S1 Pro 3D Printer with 300°C High-Temperature Nozzles,Sprite Metal Direct Extruder,Removable PEI Spring Platform,CR Touch Auto Leveling,LED Light,Print Size 8.6×8.6×10.6in

  • 【300°C High-Temperature Nozzles】: The Ender 3 S1 Pro 3d printer's nozzle made of brass can stand up to 300℃ printing. It is compatible with multiple filaments, such as PLA, ABS, PVA, Wood, TPU, PETG, and PA, creating numerous possibilities for the imagination. There is no need to change the nozzle even printing with different filaments, which is time-saving with enhanced efficiency..
  • 【"Sprite" Full-Metal Dual-Gear Direct Extruder】: Ender 3 S1 Pro uses the self-developed “Sprite” full Metal Dual-gear Direct Extruder. Same as its name, “Sprite”, it is small but powerful - weighing only 334g, but the extrusion force can be up to 80N. It enables smooth feeding when printing with diverse filaments, including those flexible materials, providing users with a stable and reliable printing journey..
  • 【CR Touch Auto Leveling & 4.3-inch Color Touch Screen】: Equipped with CR Touch, the 16-points automatic leveling ensures perfect leveling by measuring the distance between the nozzle and the heat bed and accurately completes compensation. The 4.3-inch color touch screen enables click-to-control. It supports the switch among nine languages, making the printer more manageable for people from various regions worldwide. Therefore, Ender 3 S1 Pro is....
Check Stock

JG MAKER Large 3D Printer Artist-D IDEX Dual Extruder 3D Printers Direct Drive Extruder Linear Rail Large Build Volume 11.81x11.81x13.38in 98% ABS PLA PETG TPU Flexible 1.75mm (Artist-D 3D Printer)

  • WORKS OUT OF THE BOX: 3 steps to set up ANYCUBIC Mega S 3D printer with 8 screws and 3 cables for minutes, not only meets fast assembly needs for expert users but also friendly use to beginners. Printing volume reaches 8.27 x 8.27 x 8.07 inches..
  • UPGRADED EXTRUDER DESIGN: Titan extruder provides precise extrusion for your 3D printing with solid filament drive and overall mechanical design compatible with most filaments, greatly reducing the clogging risk and improving printing accuracy. Works with 1.75mm 3D Printer Filament such as TPU, PLA, ABS, HIPS, WOOD, etc..
  • RESUME PRINT & SENSOR DETECTION: Mega S 3D Printer can resume printing after power outage or any other unexpected stoppage.One click to resume from the last recorded position when suffering power outages. And the sensor pauses prints and sets off an alarm when you run out of filament which greatly saves time and cost , printing volume reaches 8.27 x 8.27 x 8.07 inches..
  • ANYCUBIC ULTRABASE: Patented 3D printer printing platform surface coated with patented microporous coating, with excellent adhesion when printing and then effortlessly falls off the bed when it cools to room temp at the end of the print..
  • MORE FUNCTION: ①ANYCUBIC MEGA S is an all-in-one frame 3D printer. The rigid metal frame ....
Check Stock

Anycubic Kobra 3D Printer Auto Leveling, FDM 3D Printers with Self-Developed ANYCUBIC LeviQ Leveling and Removable Magnetic Platform for DIY Home School Printing Size 8.7x8.7x9.84 inch

  • Intelligent Auto Leveling 3d printer: ANYCUBIC KOBRA captured with the Self-developed Anycubic LeviQ Leveling Function equipped with 25-point precise leveling up, which can compensate the unevenness of the heated bed automatically, to achieve easy, fast and precise leveling, providing you with a more intelligent printing experience..
  • Ultra Smooth Printing: Direct drive extruder provides greater conveying force and preciser filament control. Compatible with PLA/ABS/PETG/TPU flexible materials. It can reduce jitter in filament transmission and ensure printing precision..
  • Removable Magnetic Platform: The models can be removed by bending the spring magnetic platform gently after printing. The platform can withstand high-intensity printing and is corrosion free, saving you a lot of maintenance cost..
  • Fast Printing & Large Printing Size: ANYCUBIC KOBRA 3D Printer maximum printing speed is 180mm/s, Average speed is 80mm/s, 167% faster than industry standard, enable you save more time on waiting. Large build volume of 8.7×8.7×9.84in / 220x220x250mm, which has enough space and freedom to realize your fantastic creativity..
Check Stock

WEEFUN Mini 3D Printer FDM 3D Printer with Resume Printing Function Quick Guide Fully Assembled Fully Open Source Auto Leveling Removable Flexible Magnetic Build Plate Build Volume 100x120x100mm

  • 【Fully Assembled】Out of the box, the user-friendly beginner 3D printer is easy to operate with 2.4" LCD Display. Come with a sample PLA filament....
  • 【Auto Bed Leveling】WEEFUN mini 3D printers don't need manual adjustments, one-touch auto-leveling for more simple and more precise printing. It's....
  • 【Pause & Resume Printing】WEEFUN 3D printers with sensor detection can resume printing after suffering power outage or any other unexpected....
  • 【High-Precision Printing】 Dual Z-axis and Dual Y-axis Rails design and auto-leveling make the 3D printing more stable and precise, greatly....
  • 【Compact Design】 This desktop 3D printer is lightweight and compact for space-saving. The removable magnetic build plate has great adhesion as....
Check Stock