ReviewsPrecision Drilling Tool

3/8 REV AIR DRILL AST-525C

Improve Working Efficiency: It Will Help You To Achieve High Efficiency And High Precision Drilling..
Easy To Operate: This HumanCentered Designed Drill Is Flexible And Convenient For HandHeld Operation..
Wide Application: Widely Used For Furniture, Machine Production, Maintenance, Drilling, Tapping..
Great Accessory: It Is A Great Tool For Drilling On Wall, Floors, Iron Plate, Etc..
High Performance: Reversible Rotation Switch Is Convenient And Practical, With High Sensitivity..

Check Stock

uxcell PCB Drill Bits 4mm Tungsten Carbide Spiral Flute Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8\ Shank

Specifications: Cutting edge diameter (CED): 4mm / 0.157".
Long Tool Life: Made from tungsten carbide, high hardness, high wear resistance, high strength, resistance to bending, anti-impairment, long service life..
Spiral Flute Bits: Spiral flute drill bits reduce cutting force and prevent drill broken, improve the drilling accuracy. Large drill bit chip space, chip resistance, chip smooth, small drilling heat..
Precision: With sharper cutting edge, milling groove and clean surface, the carbide PCB drill bits can work quickly and cleanly, no glitches or scrap left..
Applications: Great for PC boards, plastics, fiberglass, wood, soft metals. Suitable for PCB drilling machines, engraving machine, CNC and high precision special drilling equipment..

Check Stock

Micro Drill Bits -10Pcs Tungsten Carbide Macro Drill Bits Set, PCB Drill Bit Set, Mini Drill Bit 1/8\ Shank for Print Circuit Board, Amber, Jewelry, CNC Punching Engraving(1.1-2.0mm)

Specification: Cutting edge diameter (CED): 0.2mm.
shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.).
Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience.
Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy.
High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.
Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment.

Check Stock

uxcell PCB Drill Bits 3.5mm Tungsten Carbide Spiral Flute Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8\ Shank

Specifications: Cutting edge diameter (CED): 3.5mm / 0.138".
Long Tool Life: Made from tungsten carbide, high hardness, high wear resistance, high strength, resistance to bending, anti-impairment, long service life..
Spiral Flute Bits: Spiral flute drill bits reduce cutting force and prevent drill broken, improve the drilling accuracy. Large drill bit chip space, chip resistance, chip smooth, small drilling heat..
Precision: With sharper cutting edge, milling groove and clean surface, the carbide PCB drill bits can work quickly and cleanly, no glitches or scrap left..
Applications: Great for PC boards, plastics, fiberglass, wood, soft metals. Suitable for PCB drilling machines, engraving machine, CNC and high precision special drilling equipment..

Check Stock

uxcell PCB Drill Bits 4.45mm Tungsten Carbide Spiral Flute Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8\ Shank

Specifications: Cutting edge diameter (CED): 4.45mm / 0.175".
Long Tool Life: Made from tungsten carbide, high hardness, high wear resistance, high strength, resistance to bending, anti-impairment, long service life..
Spiral Flute Bits: Spiral flute drill bits reduce cutting force and prevent drill broken, improve the drilling accuracy. Large drill bit chip space, chip resistance, chip smooth, small drilling heat..
Precision: With sharper cutting edge, milling groove and clean surface, the carbide PCB drill bits can work quickly and cleanly, no glitches or scrap left..
Applications: Great for PC boards, plastics, fiberglass, wood, soft metals. Suitable for PCB drilling machines, engraving machine, CNC and high precision special drilling equipment..

Check Stock

uxcell PCB Drill Bits 1.1mm-2.0mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 1 Set (10 Pcs)

Specification: Cutting edge diameter (CED): 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm.
Cutting Edge Length: 10.5mm, 10.5mm, 12mm, 10.5mm, 12mm, 10.5mm, 12mm, 12mm, 12mm, 12mm.
shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.).
Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience.
Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy.
High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.
Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment.

Check Stock

Fowler 52-475-050-0, All-Angle V-Block and Clamp with 1.3125\ Capacity

Angle Clamp: The sides of this clamp set are parallel while the V is central and ground with a central hole provided for drilling or removing pins.
Machinist Tool: V-block set has four 3/8"-16 tapped holes, two in the bottom and one on each side for angle non-clamping.
Durable Construction: Made of hardened and precision ground tool steel, this angle V-block is perfect for grinding, milling, or drilling.
Dimensions: This V-clamp is 3-5/8" long, 1-7/8" wide, and 1-7/8" high (including clamp) with a holding capacity of 1-5/16".
High Accuracy: Sides are parallel and V is central and ground to .0003".

Check Stock

Mophorn High Precision Milling Vice 6 Inch,Bench Clamp Vise Nodular Cast Iron Material,Flat Clamp Vise Mill Vise for Milling Drilling Machine and Precision Parts Finishing

Clamp Capacity: High precision clamp vise with a jaw width of 5.9 inch (150 mm). Jaw opening: 6.3 inch (160 mm).
Main Parameter: Super-lock clamp vise height: 4.7 inch (120 mm). Jaw height: 1.8 inch (45 mm).
Stable Operation: Integrated clamp body and fixed jaw. Such design enables more stable clamping.
Quality Material: Accurately grinded flat vise will connect precisely with machine tool, thus reaching accuracy requirement of 0.0008" (0.02 mm).
High Precision: Precision milling drilling vise, able to accomplish sawing, filing, chiseling and some assembly and removal jobs in milling, drilling machine and precision parts finishing.

Check Stock

Diamond Drill Bit Set 1.5mm 20 Pieces Compatible with Dremel Collets Included Twist Tip Jewelry Beach Sea Glass Shells Gemstones Lapidary Ornament Bracelet Necklace Arts Crafts

PREMIUM QUALITY 20 pcs Set of 1.5mm Drilax Diamond Drill Bits..
PRECISION TOOLS for drilling holes in sea shell, sea glass, beads, tough stones, gemstones, pebbles, precious and semi-precious stones, porcelain, optical material, composites and even rocks..
TOOLS for Jewelry Designers for drilling clean holes for making Earrings, Pendents and Bracelets. They have multiple layers of industrial diamond particles bonded to body which provides longer drill life..
FITS Dremel-Type Rotary Tool or Small Precision Drill Press with an adjustable collet..
COOLING WATER NEEDED – High Quality Diamond Coated Drill Bits 20 pieces – Wet Type (water to be used during drilling).

Check Stock

SUZYN Drill 3Pcs Hss 1/4 Hex Shank Blue Coated Step Drill Bit Cutting Tool Smoother Drill Bit Set Pagoda Drill Bit

Open holes neat, smooth, no broken edge, will not produce tremor phenomenon.
Incision resistance is small, opening speed, chip removal easily.
High strength and great drilling performance for long term hard drilling work, also durable enough for serving a long life.
it is quite practical to help stabling the drilling process, make sure the tip point won’t move when you are drilling.
High quality, precision tool，Offers better economy, quality and performance.

Check Stock

Dowel Jig for Woodworking, Self Centering Doweling Jig, Professional Dowel Jig Kit Bushings Set, Stainless Steel Self Centering Dowel Jig, Perfect for Building Wood Frames, Making Shelves, and DIY

☬Fast and Precise Drilling☬The dowel jig has 4 ultra-precise pilot holes to ensure accurate drilling. Fixing the self centering doweling jig to the board allows precise positioning without measuring or calculating for easy and convenient precision drilling.
☬Multiple Applications☬The dowel jig kit can be used for mortise and tenon holes, building wood frames, and some home construction projects. The drill jig for straight holes is perfect for making shelves, cabinets, tables, chairs, and mounting railings. The self-centering woodworking dowling jig is a must-have tool in every carpenter’s toolbox.
☬Available in Different Drill Sizes☬In addition to the four holes in the drill jig, the self centering dowel jig comes with different-sized bushings for more accurate positioning. The drill sizes of the dowel jig kit woodworking include 1/4″, 3/8″, 5/16″, 7/16″, and 1/2″ to meet your different needs.
☬Built to Last☬The dowel jig is made of precision-hardened stainless steel, which is rust-resistant and offers extreme strength and long service life. The doweling jig is built with high-quality steel and is not easily damaged.
☬Adjustable Design☬The jaw width of the self centering dowel jig kit can be adjusted according to the thick....

Check Stock