ReviewsPrecision Potentiometers

ANNIMOS 20KG Digital Servo High Torque Full Metal Gear Waterproof for RC Model DIY, DS3218MG,Control Angle 270°

▶Upgraded Version - advanced linearity and accuracy with precision potentiometers,stable,low noise,water-proof.
▶Large Torque - maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V.
▶High Quality - equipped with strong copper & aluminum gears,CNC aluminium middle Shell.
▶High Rotation - well-controlled, 270 degree rotation. 360 degree rotation when power-off, perfect for robot joint activities.
▶Dimensions - 1.58x0.79x1.60inch (40x20x40.5mm).

8-channel independent servo interface and 8 high-precision potentiometers..
Support manual mode,centering mode,which can be switched by function keys.
Terminal block （5-8.4V）power supply port,with Over-Current Protection. Compatible with any 5V-8.4V servos..
Control accuracy: 0.09 degrees(PWM limit small change value 1us).
Wide range of applications.No need any codes, servo can be controlled by buttons or the adjustable knobs..

✔Upgraded Version - advanced linearity and accuracy with precision potentiometers,stable,low noise,water-proof.
✔Large Torque - maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V.
✔High Quality - equipped with strong copper & aluminum gears,CNC aluminium middle Shell.
✔High Rotation - well-controlled, 270 degree rotation. 360 degree rotation when power-off, perfect for robot joint activities.
✔Dimensions - 1.58x0.79x1.60inch (40x20x40.5mm).

500 x 2 Peak @ 4 Ohm. 150 x 2 RMS @ 4 Ohm. 100 x 2 RMS @ 8 Ohm. A and B parallel speaker outputs supports (4) 8 ohm speakers or (2) 8 ohm speakers or....
USB input will play music files from a thumb drive or hard drive (32gb max). SD card playback will play music files stored on a memory card (32gb....
Full controls over echo effects: volume, 2 band echo EQ, repeat, and delay parameters. Selectable mono/stereo echo effect. Dual 7 band master EQ....
Remote control for USB/SD playback and Bluetooth Full function. Built in pre-amplifier. Built in quiet cooling fan. Digital VFD display. Perfect for....
Precision tuning with high quality professional potentiometers and knobs. 115V/230V switchable for worldwide use. Unit weight: 14 lbs (6.35). Shipping....

▶New Model: DS3225MG More torque higher speed.
▶Power cord is longer up to 15.75inches(40cm),and also send with a 25T adjustable metal servo arm.
▶Best for your DIY Project:compatible with 1/8 and 1/10 scale crawler,truck,buggy,robotic arm,and any application where standard servos are used.
▶Equipped with high precision potentiometers and high-resolution digital chip, ensure stable performance, fast response, strong anti-interference ability,low noise, fast heat dissipation.
▶Dimensions:1.57 x 0.78 x 1.59in (40 x 20 x 40.5 mm).

Upgraded Version - advanced linearity and accuracy with precision potentiometers,stable,low noise,water-proof.
Large Torque - maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V.
High Quality - equipped with strong copper & aluminum gears,CNC aluminium middle Shell.
High Rotation - well-controlled, 270 degree rotation. 360 degree rotation when power-off, perfect for robot joint activities.
Dimensions - 1.58x0.79x1.60inch (40x20x40.5mm).

✔New Model:DS3225MG 25kg Servos.More torque,higher speed.
✔Power cord is longer up to 17.7inches(45cm),and also send with a 25T adjustable metal servo arm.
✔Equipped with high precision potentiometers and high-resolution digital chip,ensure stable performance, fast response, strong anti-interference ability,low noise,fast heat dissipation.
✔Best for your DIY Project:compatible with 1/8 and 1/10 scale crawler,truck,buggy,robotic arm,and any application where standard servos are used.
✔Dimensions:1.57 x 0.78 x 1.59in (40 x 20 x 40.5 mm).

Stall Torque (5V): 21 kg/cm (291.5oz/in), Stall Torque (6.8V): 23.5 kg/cm (326.2 oz/in),Speed : 0.12 sec/60°(5V) / 0.09 sec/60°(6.8V).
standard servo size:40 x 20 x 40.5 mm ( 1.58 x 0.79 x 1.60 in) Compatible with 1:10 and 1:8 scale Crawler/Buggy/Truck RC Car, mechanical arm, Quadcopter Drone and other remote control equipment..
High speed stainless steel gear ,accuracy and service life has been greatly increased Accuracy and linearity have been greatly improved! Accurate movement can satisfy the needs of making robots..
Waterproof performance: IP66 any application where waterproof standard servos are used.
High precision potentiometers and High-resolution digital chip, stable performance, strong anti-interference ability, fast response, high precision, control is more delicate and smooth operation..

Solidly-built and precise, the TH8A is crafted of 100% metal.
Featuring H.E.A.R.T HallEffect AccuRate Technology technology (patent pending), the TH8A‘s precision won’t decrease over time, thanks to its contactless magnetic sensors: no tact switches or potentiometers, for an unlimited product lifespan.
Unique design allowing for two different driving styles: “H”-pattern (7-plus-1) and sequential (plus/minus).
Multiplatform: on PC (Windows 7/8/10), the TH8A Add-On Shifter is compatible with all racing wheels available in the video game accessories market. On PS4 the TH8A is compatible with the T150 Series, the T300 Series, and the T-GT (USB and/or DIN connections), while on Xbox One it is compatible with the TMX Series, the TX Series and the TS-XW Series (DIN connection).
The TH8A can be attached to any support surface: tables or shelves.

Solidly-built and precise, the TH8A is crafted of 100% metal.
Featuring H.E.A.R.T HallEffect AccuRate Technology technology (patent pending), the TH8A‘s precision won’t decrease over time, thanks to its contactless magnetic sensors: no tact switches or potentiometers, for an unlimited product lifespan.
Unique design allowing for two different driving styles: “H”-pattern (7-plus-1) and sequential (plus/minus).
Multiplatform: on PC (Windows 7/8/10), the TH8A Add-On Shifter is compatible with all racing wheels available in the video game accessories market. On PS4 the TH8A is compatible with the T150 Series, the T300 Series, and the T-GT (USB and/or DIN connections), while on Xbox One it is compatible with the TMX Series, the TX Series and the TS-XW Series (DIN connection).
The TH8A can be attached to any support surface: tables or shelves.