ReviewsPrecision Saw Fence

Fulton Universal Aluminum Miter Gauge Fence with an Aluminum Flip Stop 18” Left Reading Tape 18” Right Reading Tape

  • ...u always want to make sure that have enough support of your stock when feeding it through the blade. The table saw blade is rotating toward you at a high rate of speed and if your workpiece moves to the side, the result can be scary and downright dangerous. With the help of a miter gauge and with our Aluminum Miter Fence secured to it, you will have full support all the way up to the blade on most of your miter angle cuts..
  • The Aluminum Miter Fence has been cut at 45 degrees on both ends of the fence. Doing this allows you to get as close to the blade as possible so your workpiece is fully supported throughout the cutting process. Straight cut or 90 degree cut fences have a large gap between the fence and the blade because it can not get as close with the straight cut ends on the fence..
  • Many times when we make miter cuts on our table saw, we need 2 or more pieces that are the exactly same length. While using the included measuring tapes that are included are pretty good at this, we have also included a handy flip stop that locks into any location along the length of the fence. This allows you to make repetitive length cuts without worrying if the pieces will end up the same. The flip stop can can simply be flipped it up and out of your way when not in....
Check Stock

VEVOR Table Saw Fence System, 57'×57' Classic Table Saw Fence Rail, Metric/Imperial Scale, Adjustable Hole Saw Fence System, w/Front Guide Bar Table Saw Fence, Tablesaw Fence Slide for Easy Gliding

  • Heavy-Duty Rip Fence: The miter saw fence system features a self-adhesive scale and magnified cursor to provide fast and accurate fence positioning. The self-stick measuring tape mounts directly to the fence and features high visibility numerals and in both metric and imperial scales..
  • Sturdy and Secure: Simple cam lever action locks the fence solidly in position, and torsion box design means no deflections while guiding wood. The paint baking process is wearing resistance and gloss..
  • Smooth Sliding: Long rails provide a huge 57-Inch maximum rip to the right of the blade. Adjustable slider pads ensure a precise fit and smooth adjustments with minimal effort..
  • Complete Tools: This table saw sled is easy to install and set up on any brand of saw. It comes with a guiding rule, front guide rail and rear guide rail, and a set of accessories to facilitate your work..
  • Extensive Uses: Table saw fence system and rail fit a variety of saws. The Steel construction Ensures that the fence is parallel to the blade. It offers quick ripping and straight cuts..
Check Stock

VEVOR Table Saw Fence System, 37'×57' Classic Table Saw Fence Rail, Metric/Imperial Scale, Adjustable Hole Saw Fence System, w/Front Guide Bar Table Saw Fence, Tablesaw Fence Slide for Easy Gliding

  • Heavy-Duty Rip Fence: The miter saw fence system features a self-adhesive scale and magnified cursor to provide fast and accurate fence positioning. The self-stick measuring tape mounts directly to the fence and features high visibility numerals and in both metric and imperial scales..
  • Sturdy and Secure: Simple cam lever action locks the fence solidly in position, and torsion box design means no deflections while guiding wood. The paint baking process is wearing resistance and gloss..
  • Smooth Sliding: Long rails provide a huge 37-Inch maximum rip to the right of the blade. Adjustable slider pads ensure a precise fit and smooth adjustments with minimal effort..
  • Complete Tools: This table saw sled is easy to install and set up on any brand of saw. It comes with a guiding rule, front guide rail and rear guide rail, and a set of accessories to facilitate your work..
  • Extensive Uses: Table saw fence system and rail fit a variety of saws. The Steel construction Ensures that the fence is parallel to the blade. It offers quick ripping and straight cuts..
Check Stock

Genuine Ryobi 089037007707 Miter Gauge Assembly Fits RTS10

  • Precise Angle Cutting: This table saw accessory is 0.04 inch / 1 mm high precision. Metric and imperial scale makes your work more convenient. ​Additional trim blocks raises working efficiency. Both sides 60 angle adjustable, ideal for crosscutting wood at a specific angle..
  • Compatible Standeded Slot: Our table saw sled is suitable for a standard 0.75 x 0.38-inch miter slot. Laser marking technology is friction-resistance to ensure accuracy. It is an economical solution for your table saw crosscutting needs. The adjustable, solid aluminum head is machined with 11 positive stop holes. 1 hole is at 90 degrees while the 5 holes on both sides are at 10, 22.5, 30, 45, 60 and 90 degrees..
  • Premium Sturdy Construction: This woodworking tool is made of aluminum alloy, ensuring its durability and sturdiness. The steel miter bar is equipped with a removable metal retaining disc to prevent accidental lifting..
  • Simple & Secure Operation: An adjusting screw and guide wheel are added in the middle, which is more convenient to insert into the slot hole and fix the seat. The miter gauges are flat without burr, secure, and hands-free..
  • Wide Application: The table saw miter can improve the safety and accuracy of the table saw and the router table. It also can be used for....
Check Stock

Delta 3 HP Motor 10 in. UNISAW with 52 in. BIESEMEYER Fence System. (36-L352)

  • THIS ITEM SHIPS IN 4 BOXES. YOU SHOULD RECEIVE THE FOLLOWING COMPONENTS - 36-L300 3hp Saw Body (Crated) 78-138 Fence Rails (Boxed) 78-919 Fence & Legs (Boxed) 78-864 Extension Table (Boxed).
  • IF ANY COMPONENT IS MISSING FROM YOUR ORDER PLEASE ACCEPT THE SHIPMENT AND CONTACT AMAZON. DO NOT RETURN THE ENTIRE UNIT BECAUSE OF A MISSING PART. WE WILL EXPIDITE THE DELIVERY OF ANY MISSING COMPONENT. THANK YOU.
  • Powerful 3 horsepower, 220 volt, 60 Hz American Marathon motor designed to handle the most demanding production environments..
  • Unrivaled vibration control, for smooth operatIon and accuracy.
  • Bevel dial tunes blade bevel providing accuracy to within 1/4°.
  • Legendary Biesemeyer fence system allows for precision cuts every time and has a special designed allowing you to cut small pieces of stock.
  • A single-cast TRUNNION system results in incredible vibration control providing continuous smooth operation.
Check Stock

POWERTEC 71143 Deluxe Miter Gauge for Table Saw | Miter Guide with 120 Angle Stops

  • Function: a high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts.
  • Features: a lightweight design with a durable laser-cut aluminum construction, Large gauge handle, universal fence mounting bracket pivoting locking mechanism, A removal plate that allows the miter gauge to be used with t-slotted and non t-slotted miter slots, and adjustable Expansion discs that remove all side play from the bar, creating a perfect fit.
  • Precision: angle guide (with 120 total angle stops) in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts.
  • Universal design:suited for most standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular Brand table saws, band saws, Router tables, disk and belt sanders.
Check Stock

THE SMART CUT Aluminum Table Fence 18 ft with Universal Saw Attachment Mounts | For Any Portable Chop or Miter Saw Stand | Compact & Lightweight | Easy Setup Jobsite Table

  • LESS BOARD STRUGGLE: The Smart Cut Aluminum Table Fence universally attaches to any saw or stand (not included) giving you a flush fit to your saw back fence and base. Table sections can be configured left or right of the saw for cutting work pieces of any size. This table eliminates board struggle at the saw and keeps boards on plane for precise, accurate cutting..
  • COMPACT & LIGHTWEIGHT: The aluminum Table Fence is very lightweight, portable, and jobsite tough. Our miter saw accessories are heavy-duty, yet fast and easy to set up and tear down so you can go home at the end of the day. It’s a great addition to your miter saw stand, the table breaks down into (4) 4.5ft sections, it fits easily into your truck bed. Cost, quality, and versatility make this a superior product to other miter saw tables, miter saw fences, and miter saw accessories competitors..
  • SATISFACTION GUARANTEED: Made in the USA and Veteran Owned, we are confident you will love our miter saw products. We are committed to providing the highest level of customer satisfaction. If you are ever unsatisfied, reach out to us directly, and we will do all we can to make it right. Your satisfaction is our #1 priority..
Check Stock

WoodRiver Adjustable Fence Clamps, 2 Piece

  • This fence will improve your band saw instantly. Easy to adjust for blade lead with angle bracket design. Will fit most 14" band saws with tables up to about 16" square..
  • Bolts directly to existing holes in the 14" Delta, Jet, Ridgid, Powermatic (without extension table) & Porter Cable. May be able to be attached to other 14" band saws by drilling four holes, see instruction sheet..
  • The most rigid fence available. Two separate fence position locks at both ends and two separate blade lead locks as well..
  • See the HD Band Saw Circle Jigs - 7286-7290 too. Clamps to any band saw to cut circles or arcs from 3" diameter up to 189.
Check Stock

Kreg KMS7215 Micro-Adjuster for Band Saw and Router Table Fences

  • Provides precise adjustments, down to .005" (0.127mm).
  • Easy to adjust with the simple turn of a thumb wheel.
  • For use with Kreg Precision Band Saw Fence.
Check Stock

Saw

  • Stainless-steel miter detent plate of 12-inch miter saw blade comes with 14 positive stops.
  • The mitre saw features the precise miter system and machined base fence support.
  • Tall sliding fence of DEWALT miter saw supports 5-1/2-inch base vertically.
  • Bevels 0 degree - 48degree to the left and 0 degree- 3degree to the right. Tool height-15 inch.
  • 2-inch x 8-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 6-inch dimensional lumber at 45 degree.
Check Stock

Delta 36-5152T2 Contractor Table Saw with 52\ Rip Capacity and Cast Extension Wings

  • IF ANY COMPONENT IS MISSING FROM YOUR ORDER PLEASE ACCEPT THE SHIPMENT AND CONTACT AMAZON. DO NOT RETURN THE ENTIRE UNIT BECAUSE OF A MISSING PART. WE WILL EXPIDITE THE DELIVERY OF ANY MISSING COMPONENT. THANK YOU.
  • THIS ITEM SHIPS IN 3 BOXES. YOU SHOULD RECEIVE THE FOLLOWING COMPONENTS - 36-5 Saw Body 36-T52 52" Rails 36-T53 Extension Table.
  • Powerful 15 amp Contractor Grade motor easily handles hardwoods.
  • 52 Inch Rip Capacity handles large stock.
  • Legendary Biesmeyer Fence Accurate to 1/64”.
  • Smooth and dependable adjustable belt drive table saw.
  • Cast iron table top with 2 cast iron extension wings.
  • Heavy duty one piece rail system for precision cuts every time.
Check Stock