ReviewsPress Brake Punches

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Blue

  • 【2 Groups Of Push Boards Wider Application】This brake caliper press tool has 2 sets spreading plates, the bigger ones more fit for some sextuplet pistons fixed calipers, smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers, is designed to "push" the piston back, cannot twist and compress at the same time..
  • 【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
  • 【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
  • 【Comfortable And Durable】This brake....
Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Red

  • 【2 Groups Of Push Boards Wider Application】This brake caliper press tool has 2 sets spreading plates, the bigger ones more fit for some sextuplet pistons fixed calipers, smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers, is designed to "push" the piston back, cannot twist and compress at the same time..
  • 【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
  • 【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
  • 【Comfortable And Durable】This brake....
Check Stock

EWK Brake Caliper Press Tool Piston Spreader Pad 360 Degree Swing Ratchet with 2 Pcs Steel Plates

  • 【 Versatile Tool 】 EWK brake caliper press tool comes with two pairs of press plates: 4.53x2.24 inches and 5.79x3.36 inches. Ideal for most large trucks and commercial vehicles with single, double, and four side pistons brake caliper..
  • 【 Time & Effort Saver 】 360-degree swing design makes the brake caliper compression tool easy to insert into the caliper and use from any direction..
  • 【Easy to Use】 Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components..
  • 【 Ratcheting Design 】 Because of the ratcheting mechanism, you will need to apply some pressure to squeeze the spreaders inward, then you are able to spread the brake tool to fit into your caliper. Fully retract: 1.59”.
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance..
Check Stock

Lang Tools 277 Brake Caliper Press

  • 【Fit for Disc Brake】 The brake caliper press tool is equipped with two groups of push boards: 7.01x2.36 inches and 4.53x2.17 inches, Suitable for....
  • 【Working Principle】The spreader can spreading to push the boards or retracting when finished it. (Ajust by the switch). In expanded mode, the....
  • 【How to use】Make the push boards both sides Centralized Alignment the pistons, let both sides of the push boards be forced at the same time (press....
  • 【Size Reference】Two groups of push boards size: 7.01x2.36 inches and 4.53x2.17 inches.
  • Telescopic range: fully retracted: 1.88”, fully expanded:....
  • Two-Year Customer Service for Five Bananas Brake Caliper Tool. Pls email us first when you have any problem, we promise will provide the best....
Check Stock

THOROAD Brake Caliper Press Tool, Brake Caliper Compression Tool,Car Ratcheting Brake Caliper Piston Spreader Press Tool with 2 pcs Steel Plates (Red)

  • 【】THOROAD Brake Caliper Press Tool uses high quality spreading plates with 1/8" thickness steel,corrosion resistance, economical and practical, with long service life. The ratchet brake piston is equipped with 2 additional steel plates. The bigger spreading plates with build-in small magnets and cylindrical pins, can install and unload quickly and easily from the compressor..
  • 【】THOROAD Brake repair brake spreading tool adopts 360 degree ratchet design, it is easy to get into place and use from any direction, also your hands will not get fatigued from the constant squeezing. Ratchet technology provides 360 degree full rotation so that the spreader can be placed in any position. The centering ratchet screw produces a uniform force as it compresses the piston to ensure proper alignment and prevent damage to the brake assembly..
  • 【 】THOROAD brake caliper compression tool ideal for most large trucks and commercial vehicles with quad piston calipers.Easy to install, easy to remove. Ratchet technology gives a full 360-degree swing so that the spreader may be placed at any position.Suits for disc brake, NOT for drum brake..
Check Stock

10 Pieces Craft Hole Punch Mini Craft Paper Punch Single Crafting Scrapbook Punch Shape Hole Puncher for DIY Craft, Scrapbook, Cards, Handmade Project, 10 Shapes

  • Package quantity: you will receive 10 pieces craft hole punches in 10 different shapes, heart shape, snowflake, pentacle, circle, butterfly, crown, little girl, spray, tulip, dove.
  • A variety of shapes can meet any of your manual needs.
  • Size information: the mini craft paper punch is approx. 2.5 x 1.5 x 2 inches.
  • It is designed with handle, fast and easy to punch out shapes.
  • Friendly advice: just use plain paper, glitter paper, color cardboard, EVA foam, foil paper, kraft paper, and more.
  • Otherwise, the long time will affect the using life of the embossing machine.
  • In addition, the shape hole puncher is applied as a paper pressing tool, so cloth products can't be applied.
  • Meticulous craftsmanship: these single crafting scrapbook punches are made of ABS plastic and zinc alloy.
  • Easy to use and trim through the cardstock, spring-action makes the punch easier and more comfortable to use and gentle your hands, cute and sturdy, with no burr or pointed edges.
  • Easy to trim: our scrapbook punch can punch your paper cleanly with no hurt on the edges.
  • No need to stop the foil to get the job done well.
  • If the pattern pressed by the embossing device can not be taken out, do not ho....
Check Stock

DASBET 4 in1 Ball Joint Service Auto Tool Kit 2WD & 4WD Car Repair Remover Installer

  • Function: The ball joint press removal tool with four wheel drive adapter allows easy removal of crimped parts including ball joints, universal joints, brake fixing pins, etc. You don't need to remove the control arm from the vehicle at all during operation, improving work efficiency..
  • Durable Structure: The ball point press kit is made of heavy forged steel with black oxide finish adapters.The ball joint service auto tool kit has great strength and service life, while rust and corrosion resistant.And the ball joint separator tool can withstand long-term and massive use..
  • Easy to Operate: The ball joint service auto tool kit is ideal for removing/installing vehicle parts. You can remove all lock ring retainers from the brake anchor pins, then place the C-frame press on the brake spider, and tighten the forcing screws until the mounting pins are removed. .
  • Wide Compatibility: The ball joint press & U joint removal tool kit is suitable for most two wheel drive (2WD) and four whee....
Check Stock

Metal Stamping Kit with Hammer and Steel Bench Block 36 Piece Punch Set - Letter Stamps for Metal Jewelry Wood Leather & More

  • PROFESSIONAL GRADE - This Crutello Metal Stamps Set Includes 26 Uppercase Basic Sans Serif Font Letter Punches, 8 Number Punches (6 and 9 are the same....
  • DESIGNED TO LAST - These 3mm Steel Punches Designed to Last up to 10,000 Punches. All Stamps are made of High Quality Hrc 58-62 Alloy Steel. Punches....
  • 20 STAMPING BLANKS - Kit includes 20 aluminum practice blanks. Aluminum is a Soft Metal Perfect for Creating Beautiful Handmade Jewelry or Beautiful....
  • NO REBOUND STEEL BENCH BLOCK - Crutello's 2x2” Steel Stamping Block Features Non-Skid Rubber Feet to Absorb Shock, Stay in Place, and Create a Solid....
Check Stock

AR-15 Complete Assembly Guide

  • 【Replaceable Hammer Head】The hammer head is bigger and heavier, making it easier to strike. And the two ends of the hammer are detachable. We provide you with 4 interchangeable hammer heads (rubber, brass, steel and nylon), you can choose the right hammer head according to your needs..
  • 【Newly Upgraded Punches】The newly upgraded steel punches have been specially treated to make them stronger. The needle is the most easily broken part of the entire kit. We provide quality pins, so you can avoid giving up the entire gunsmith's hole punch kit due to one pin breaking..
  • 【Size】Includes 5 3/16”, 7/32”, 1/4”, 9/32” and 5/16” brass punches, and 3 high-quality steel punches 1/8” and 9/64” , 5/32”, 4 hollow punches 1/16", 5/64", 3/32", 1/8", 4 specially processed punches, 2 each of 1/16" and 3/32",2Pcs sturdy plastic punches including 15/64", 3/8",.
  • 【High-Huality Materials】XOOL Gunsmithing Tools is sturdy and durable. The high material cost and advanced technology make our products have a longer service life. The high-strength steel is not easy to bend, and the brass punch can not leave scratches during use. The best choice for gun owners to repair their guns.
  • 【Easy to Carry】Comes with a convenient plastic molded storage box for....
Check Stock

BIGTUR Brake Caliper Press Tool, Car Ratcheting Brake Caliper Piston Spreader Press Tool with 2 pcs Steel Plates/2 pcs Hangers

  • ...car parts while the brakes are being repaired..
  • Easy to use: Ratchet technology gives a full 360° swing so that the spreader may be placed at any position.The extended reversing lever allows for easy change from spreading to retracting. Fully retracted: 1.88”, Fully expanded: 3.03”.
  • High quality:Brake caliper compressor uses high strength spreading plates with 1/6" thickness steel, which is not easy to deform and is durable. The ergonomically designed reinforced handle is efficient, comfortable and non-slip..
  • Wide range of applications: Our professional brake caliper press is suitable for all disc brake caliper press ratchets. Suitable for most large trucks and commercial vehicles. Used for dual-piston and four-piston fixed calipers, and single-piston and double-piston floating calipers.The bigger ones more fit for some sextuplet pistons fixed calipers..
  • Professional after-sales team: All kits are provided with lifetime technical support and one-year limited warranty.If there is any problem during the purchase period, please contact us at any time, and we will provide the most professional and timely service..
Check Stock

ABN Caliper Piston Compressor Tool 16-pc Pneumatic Brake Caliper Tool Air Brake Tools Brake Caliper Compressor Tool

  • MAKE BRAKE JOBS EASY: Use the ABN Brake Compressor on left or right hand thread brake system wheel cylinder piston brake calipers (wind back calipers and some push back single piston calipers) with the 1/4-inch air hose adapter to simplify brake jobs.
  • Choose an adapter, connect your existing shop air line, press pressure button and rotating lever to wind back brake piston, press release button, and pull rotating lever to move push piston axle backwards for dismounting tool caliper.
  • FITS YOUR VEHICLE: Drive key adapters for GM, Citroen XM & Zantia, Citroen CXM, Citroen C5, Alfa Romeo, Alfa Romeo 164 2.0 Saab 9000, Audi, Audi 80/90 & V8, BMW, Ford, Honda, Honda Prelude Isuzu, Jaguar, Jaguar XI40, Mercedes, Mitsubishi, Nissan, Nissan Bluebird, Nissan Silvia, Nissan Maxima Rover, Toyota, Toyota Celica & Corolla GR & MR2, Volkswagen (VW), VW Golf/Pas-Sat Corrado/GTX 16V/Scirroco, Volvo, Mazda 323.626, Primera 2.0L VW Golf IV, Rover 800, Subaru L & 2 Series, Opel, Ford Mondeo.
  • BUILT TO LAST: Pneumatic body constructed from solid heat-treated cast anodized aluminum.
  • Moving parts constructed from chrome alloy steel (chrome finished rotating lever, phosphate finished holder, and anodized aluminum handle).
  • Each adapter is permanently etched with size for quick i....
Check Stock