ReviewsPressed Thrust Ball Bearing

SKF F4B 108-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-1/2\ Bore, 4\ Bolt Hole Spacing, 6900lbf Dynamic Load Capacity

• Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
• Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
• Set screw locking for secure attachment to shaft.
• Contact seals on both sides of the bearing keep lubricant in and contaminants out.
• Grease fitting on the housing for reapplying lubricant.

SKF F4B 104-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-1/4\ Bore, 3-5/8\ Bolt Hole Spacing, 5730lbf Dynamic Load Capacity

• Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
• Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
• Set screw locking for secure attachment to shaft.
• Contact seals on both sides of the bearing keep lubricant in and contaminants out.
• Grease fitting on the housing for reapplying lubricant.

SKF F4B 103-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-3/16\ Bore, 3-1/4\ Bolt Hole Spacing, 4380lbf Dynamic Load Capacity

• Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
• Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
• Set screw locking for secure attachment to shaft.
• Contact seals on both sides of the bearing keep lubricant in and contaminants out.
• Grease fitting on the housing for reapplying lubricant.

SKF F4B 204-TF Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Seals with Flingers, Cast Iron, 2-1/4\ Bore, 5-5/8\ Bolt Hole Spacing, 11840lbf Dynamic Capacity

• Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
• Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
• Set screw locking for secure attachment to shaft.
• Contact seals and flingers on both sides of the bearing keep lubricant in and contaminants out.
• Grease fitting on the housing for reapplying lubricant.

SKF F4BM 300-TF Ball Bearing Flange Unit, 4 Bolts, Medium Duty, Set Screw Locking, Seals with Flingers, Cast Iron, 3\ Bore, 6\ Bolt Hole Spacing, 16360lbf Dynamic Capacity

• Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
• Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
• Set screw locking for secure attachment to shaft.
• Contact seals and flingers on both sides of the bearing keep lubricant in and contaminants out.
• Grease fitting on the housing for reapplying lubricant.

Ventilator, Turbine, 6in

• Price For: Each Overall Width - Roof Ventilators: 12-3/4" Overall Width (In.): 12-3/4 CFM @ 4 MPH Wind: 147 Requires: Base for New Installations, Flashing Item: Turbine Ventilator Item - Roof Ventilators: Turbine Ventilator Construction Material: Galvanized steel With Aluminum Bracing Includes: - Type: Wind Driven.
• Bearing System: Features Oiless Bronze Upper Bearing and Lower Thrust Type ball bearing Overall Height - Roof Ventilators: 14-1/2" Throat Dia.: 6" Overall Height (In.): 14-1/2 Bracing - Roof Ventilators: External Bracing: External Country of Origin (subject to change): United States.

RIKON Power Tools 10-324 14\ Open Stand Bandsaw

• Ball-Bearing Blade Guides - Upper and lower ball-bearing blade guides and thrust bearings reduce friction, increase blade life and contribute to the smooth operation of the machine during cuts.
• Rack and Pinion Guide Post – Adjust the cutting depth easily with the turn of a knob. New inch scale helps set guide heights.
• Extra Tall Rip Fence – Increased fence and re-saw bar heights of 6" give added support of lumber being ripped or re-sawn.
• Rear 115V Power Outlet – Handy electrical outlet for plugging in lights, radios, phone chargers and more.
• Takes 111” Blades – Band saw accepts all styles of 111” long blades from 3/16” to 3/4” in width.

Sealmaster NP-26 Pillow Block Ball Bearing, Non-Expansion Type, Normal-Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast Iron Housing, 1-5/8" Bore, 2-1/8" Base to Center Height, 5-3/4" Bolt Hole Spacing Width

• Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
• Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
• Set screw locking for secure attachment to shaft.
• Contact seals and flingers on both sides of the bearing keep lubricant in and contaminants out.
• Grease fitting on the housing for reapplying lubricant.

Bettomshin 2Pcs F3-8M Thrust Ball Bearing 3mm Bore 8mm OD 3.5mm Width P0Z1 GCr15 Axial Ball Thrust Bearings

• 【Dimension】Bore Diameter : 3mm / 0.12".
• 【CAPABILITY】High precision, fast speed, long life, uniformly load distributed, can withstand high thrust loads.
• 【MATERIAL】Made of GCr15, durability and resistance to deformity under loads, have great wear-resistant, high temperature resistance and high hardness.
• 【APPLICATION】Can be used for jack, pump, rotating applications, machine tools ect.
• 【FEATURES】The separable components of thrust ball bearings are interchangeable. Low noise and long service life, easy to maintain. Keep the bearing working environment clean and bearing lubricated in time.

Thrust Ball Bearings Chrome Steel ABEC3 Single Row Roller (51101 12mm x 26mm x 9mm, 2)

Micro Traders 8pcs Miniature Plane Thrust Ball Bearings F10-18M Single Direction Chrome Steel for Oven Turntable Jack Pump 10x18x5.5mm

• Size: Bore Diameter10mm, Outer Diameter18mm, Thickness5.5mm..
• Material: Made of Chrome Steel(AISI 52100), have great wear-resistant, high temperature resistance and high hardness..
• Capability: Dynamic Load Rating (Cr): 2.23kN.
• Limiting Speed (Grease): 2500rpm, designed for low speed operation and axial loads only, can withstand high thrust loads..
• Application: Can be used for oven turntable, jack, pump, rotating applications, machine tools, automobiles, motors, generators, gear devices and compressors, ect..
• Feture: The separable components of thrust ball bearings are interchangeable. Low noise and long service life, easy to maintain. Keep the bearing working environment clean and bearing lubricated in time..