ReviewsPressure Ball Valve

EDOU DIRECT Ball Valve for High Pressure Washer Hose | 3/8" Male Plug & 3/8" Female Quick-Connect | 4,500 PSI Max Working Pressure | Easily and quickly switch between wands, tips, or hoses.

Professional Ball Valve Kit - Includes 3/8” quick coupler plug and 3/8” quick coupler socket. The ball valve kit is designed for using with a high pressure hose..
Premium Quality - Made of stainless steel and designed for a maximum working pressure of 4,500 PSI..
Leak Free - Apply Teflon tape to the ball valve for a superior, leak-free experience..
Highly Convenient - The ball valve is easy to turn on & off, and provides good leverage under high pressure. Switch wands, tips, or hoses quickly and easily..
Superior Value and Excellent Customer Service - Includes lifetime professional customer support within 24 hours..

Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female 1/4 Inch NPT.
Stainless Steel 1PC Ball Valve Handle: Handle with blue vinyl insulation.
Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need full-bore ball valve, please check the related products in Product Description..

1-1/2" NPT Female Threaded IPS Brass Full Port Water Stop Shut Off Ball Valve ,Heavy Duty Lead Free ,Quarter Turn.
Heavy duty: forged Brass ball valve pressure is rated 150 psi wsp for steam and 600 psi woc for water, oil and gas.
1-1/2" NPT Threaded IPS Lead Free Brass Water Cut off Ball Valve.
Size: 1-1/2" NPT IPS Brass Ball Valve Max Pressure (PSIG):150 Max. temperature: 200°F.
IAPMO Listed to cUPC - Certified to NSF 61-G - "Lead-Free" Compliant.

Carbon steel ball valve kit designed for high-pressure hoses..
Switch wands, tips, or hoses quickly and easily..
Valve is easy to turn and provides good leverage under high pressure..
Inlet: 3/8 in. Male Quick Connect Plug — Valve: 3/8 in. High-Pressure Ball Valve.
Outlet: 3/8 in. Female Quick Connect — Max PSI: 3,000 PSI.

High-pressure ball valve has a 3/8 in. male plug and a 3/8 in. female quick connector.
Zinc-plated ball valve kit designed for high-pressure hoses..
Valve is easy to turn and provides good leverage under high pressure..

The Aquatic Life Float Valve Kit allows you to fill large tanks.
1/4″ Tube Float Valve Kit Connects to Faucet.
Minimum Operating Pressure: 40 PSI,Maximum Operating Pressure: 80 PSI.
Contains: 3 meters tubing, PVC ball float 1 pcs, all around valve 1pcs, manual ball valve 1 pcs,One check valve 1 pcs.
RO Water Reverse Osmosis System water filter Push to Connect Pipe Hose Tube Fittings.

Reduced pressure principle backﬂow preventer consisting of a pressure differential relief valve located between twoindependently operated spring-loaded center guided check valves, “Y” pattern body.
Complete with two full port resilient seated ball valves for shut-off and four resilient seated ball valve test cocks.
Pre-plumbed backﬂow station. Assembly can be of the reduced pressure principle or of the double check type.

RAGE SLAM BALL is encased in an ultra-durable heavy-duty rubber shell.
It is high endurance impact approved and performs in ways a medicine ball cannot.
TEXTURED SURFACE - Allows for a high quality grip even when wet.
NO BOUNCE DESIGN - Ideal for various throwing and Slamming routines.
equipped with an air valve that releases pressure to prevent bursting.
EQUIPPED WITH AIR VALVE - Releases pressure to prevent bursting.
This air valve also makes it possible to adjust the air capacity and overall firmness of the slam ball.

...MENT --- R134a valve core remover installer designs for using of servicing valves to remove and install the valve core R134 or R12 from a 1/4-inch male flare access fitting in AC systems without the loss of refrigerant. Excellent for replacing valve cores without discharging or reclaiming the system..
☀ HIGH & LOW PRESSURE QUICK COUPLER --- High pressure coupler (Red), with inner diameter 16 mm, and Low Pressure coupler (Blue) with inner diameter 13 mm..
☀ ADJUSTABLE --- The R12 valve core quick remover installer is adjustable to fit the different valve core. Good for vehicle/car/auto air condition, household air conditioner, HVAC Maintenance or repairing..
☀ WELL-DESIGN --- Built-in stainless-steel ball valve: the well-designed ball valve and threaded remover lets the user block off the system while changing the valves cores, allowing for no refrigerant loss..
☀ 1 YEAR WARRANTY --- Valve Core Quick Remover Installer sets are made by high quality brass alloy, last long.
easy to operate and install, strong sealing for durability and safety. We offter 12 months warranty, if it can’t work normally during the warranty time or any other question, please feel free to contact us, we will refund or reship for you without any reason..

Dial type pressure gauge ensures accurate inflation of all types of athletic & recreation balls..
Gives reading in both Kg per square centimeter and PSI scales.Maximum pressure range up to 15 psi or 1 kg/cm².
Solid full metal body construction that is built to last.Chrome plated brass stem with USA type needle.
Push-type air release valve to easily release pressure to prevent over-inflation..
Simply insert the needle into the ball valve and you can take a reading in seconds. It works for all inflatable balls: soccer ball, football, rugby ball, basketball, volleyball, water polo ball, etc..

Commercial Dual Gauge Primary Keg Beer Regulator.
CO2, 60# & 2000# Gauge, 5/16b Shutoff (W/Ck Valve) Plastic Bonnet for Easy Pressure Adjustment Ball Check Valve.
High Pressure Gauge (Side) Indicates Co2 Tank Pressure Remaining (0-2000 psi).
Low Pressure Gauge (Top) Indicates Output Pressure to Keg (0-60 psi).