ReviewsPressure Container

Tuttnauer 2340M Manual Autoclave

  • EASY TO OPERATE: Design of dual scale pressure gauge brings a convenient experience. This professional autoclave is basically a self-contained pressure canner with technical added accessories to make it easier to use as a pressure cooker..
  • PREVENT DRY BURNING - Upgrade of heating system to prevent dry burning. If the water volume is below a certain level, the machine will automatically power off. The steam autoclave is constructed from 304 stainless steel for superior durability and withstand temperature up to 1472°F..
  • DUAL HEATING SYSTEM OF ELECTRIC AND COAL: You can use fire heating to take effect without power. Rated working pressure of the pressure canner: 0.142~0.165MPa (20.59~23.92psi) and it’s rated working temperature is 126~128°C(259~262°F)..
  • 19 QT CAPACITY: The canning pot’s inner container capacity is 15.6 Quarts (11 in diameter*9.4 in high) makes it easy to create large batches, whether preparing make-ahead meals for the week or clean clothing and equipment..
  • TWO VALVE DESIGN: In order to avoid pressure explosion exceed, two pressure valves are designed on the lid to ensure the safety under high pressure. The safety valve will automatically open when the deflate valve fails..
Check Stock

Taidacent Non Contact Liquid Level Sensor Contactless Water Level Sensor Externally Attached Pipe Water Float Switch NPN Output Capacitive

  • The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container..
  • The liquid level sensor (probe) is installed above and below the outer wall of the container to be tested (the high and low positions of the liquid level). The non-metallic container does not need to be opened, and the installation is simple and does not affect the production..
  • The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected..
  • The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used..
  • NPN output: If there is induction, the output is low level.
Check Stock

M MINGLE Adjustable Chemical Injector Kit for Pressure Washer, Soap Injector, 3/8 Inch

  • ★Attention: Max pressure is 3200 PSI. Pressure washer downstream chemical injector kit includes chemical injector, 10 feet tubing (siphon hose), filter and black soap nozzle..
  • ★Used to siphon detergent out of separate container. The chemical or soap runs after pump, which will not damage pump. Great for cleaning or spraying..
  • ★Control metering valve to adjust dilution ratio of chemical and water. Chemical-resist and poly strainer reduces injector clogging..
  • ★Soap injector has universal 3/8’’ quick disconnect. It connects between pressure washer pump and hose..
  • ★Flow rate is from 2 GPM to 5 GPM. Works with most brands of gas and electric pressure washer, cold and hot water pressure washer..
Check Stock

Waring Commercial Stainless Steel Container, 64-Ounce

  • This container is constructed of stainless steel material for durability.
  • Features high-performance cloverleaf jar design which creates a high-power vortex and funneling food directly into the blade.
  • Includes easily removable container cover with removable clear cap for adding ingredients and pressure reduction during hot food blending.
  • It is designed to use with Xtreme hi-power blender model MX1000XTS.
Check Stock

Wztepeng 7.5L/2 Gallon Red Fuel Tank Gas Tank Fuel Container Square Spare Plastic No Spill Fuel Container Compatible With Motorcycle SUV ATV Off Road Vehicles

  • Widely Application : the fuel container can be used for motorcycles, off-road vehicles, UTV, ATV, when the fuel is insufficient, the spare fuel in the container can be used to supplement..
  • Material : The fuel container is made of density polyethylene plastic material, anti-corrosion, anti-static and anti-ultraviolet. It can ensure that the fuel will not ignite spontaneously in the fuel tank to avoid explosion..
  • Features : The fuel container has a build-in refueling hose. After turning on the knob, the refueling hose can be installed upside down on the outlet of the container , which is more convenient for pouring oil..
  • Package Included : There is no additional mounting bracket in the package, there is only 1 pcs fuel tank. You can buy brackets to fix it on your car, such as motorcycles and off-road vehicles..
  • Tip : The fuel container is designed with a vent hole to prevent the negative pressure generated during use from causing the fuel to flow back . So please open the vent hole while refueling.
Check Stock

Taidacent Non Contact Water Level Sensor Flow Sensor Float Switch Water Level Switch High and Low Level Output

  • The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container..
  • The liquid level sensor (probe) is installed above and below the outer wall of the container to be tested (the high and low positions of the liquid level). The non-metallic container does not need to be opened, and the installation is simple and does not affect the production..
  • The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected..
  • The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used..
  • High and low level output: If there is induction, the output is high level.
  • no induction, the output is low level. Specially designed for non-metallic pipe liquid level detection.
Check Stock

Waring Commercial The Raptor Copolyester Container, 64-Ounce, Clear

  • This all-purpose container is constructed of BPA-free copolyester material.
  • Features ultra-aggressive blade and jar design delivers smoother consistencies and faster results.
  • Includes easily removable container cover with removable clear cap for adding ingredients and pressure reduction during hot food blending.
  • It is designed to use with Xtreme hi-power blender model MX1000XTX.
Check Stock

Eagle 5 Gallon Type II Gas Can for Diesel with 12\ x 5/8\ Flexible Metal Spout, Made in USA, Galvanized Steel Flammable Storage Can, Yellow, U251SX5Y

  • Each metal gas can is made of 24-gauge hot dip galvanized steel using deep drawn construction so there is no top or side seam and has a double interlock no-weld bottom seam.
  • The gas container has 2 openings: a pressure-relief spring-closing lid for filling, and an actuated pour valve with a flexible 12 inch metal spout for safe, controlled dispensing.
  • The gasoline can has a leakproof, self-closing lid with a nitrile gasket that vents at 5 PSI internal pressure and a baked-on high gloss powder coat finish with trilingual labels.
  • The filler spout and flame arrestors in both openings of the metal safety can have a non-sparking design for flashback protection and a pressure relief cap that allows the container to automatically vent to prevent rupture or explosion in a fire.
  • Each Eagle Type II gas can is leak tested and made in the USA.
Check Stock

Twinkle Star Foam Cannon 1 L Bottle Snow Foam Lance with 1/4\ Quick Connector, 5 Nozzle Tips for Pressure Washer

  • Adjustable Foam Lance, foam cannon with 1/4" quick disconnection fitting, included 33 OZ (1 liter) container bottle..
  • 5 pressure washer nozzle tips, 1/4 Inch, 2.5 GPM, with different angels to clean the foam..
  • Please add 6 oz soap with some warm water to get the thick foam. The adjustable nozzle can adjust the pattern from a jet stream to a wide fan pattern..
  • All the connectors are made of quality brass. New Heavy Duty Design, ideal for enthusiast or professional use..
  • Requires Pressure Washer to Have 2.5GPM & Over 1000 PSI Pressure for use. ONLY SUITABLE FOR PRESSURE WASHER GUN, PRESSURE WASHER HOSE, PRESSURE WASHER..
Check Stock

DoubleWood 20Pcs Chicken Nipples Horizontal Side Mount Poultry Water Nipple Waterer Drinker Outdoors for Chicken Ducks Quail and Other Poultry (20)

  • MATERIAL- Made with durable plastic and stainless steel, last long time in outdoor exposure use..
  • EASY TO INSTALL- Just drill a hole in the side of your container and tighten the chicken nipple in by hand..
  • AUTOMATED- This horizontal chicken waterer will release water only if the steel rod is triggered by the flocks and then shuts off whenever no bird is striking into it. All you need to do is refill the bucket/container whenever water is runs out..
  • SUGGESTION- One nipple per every 4 chickens / poultry. Chicken nipples waterer require a low-pressure water source. When it is connecting to household water lines, a pressure regulator will be need..
Check Stock

SANOL Foam Cannon with 1/4 Quick Connect for Pressure Washer Gun and Wand with 1L Bottle 5 Pressure Washer Nozzle Tips

  • Adjustable Foam Lance, foam cannon with 1/4" quick disconnection fitting, included 33 OZ (1 liter) container bottle..
  • 5 pressure washer nozzle tips, 1/4 Inch, 2.5 GPM, with different angels to clean the foam..
  • Please add 6 oz soap with some warm water to get the thick foam. The adjustable nozzle can adjust the pattern from a jet stream to a wide fan pattern..
  • All the connectors are made of quality brass. New Heavy Duty Design, ideal for enthusiast or professional use..
  • Requires Pressure Washer to Have 2.5GPM & Over 1000 PSI Pressure for use. ONLY SUITABLE FOR PRESSURE WASHER GUN, PRESSURE WASHER HOSE, PRESSURE WASHER..
Check Stock