ReviewsPressure Flowmeter

ANCEL S3000 Smoke Machine Automotive, EVAP Smoke Machine Diagnostic Leak Tester, Dual-Mode Vacuum Fuel Pipe Leak Detector with Pressure Gauge&Adjustable Air Flowmeter for All Car/Motorcycle/Truck/Boat

... ANCEL S3000 automotive smoke machine has a hook for you to hanging on vehicle hoods, conveniently for leak diagnosis, also S3000 automotive smoke machine leak detector features a flow meter, which is easy to read, enable you to judge the size of a leak..
【Adjustable Air Flowmeter+ Viewable Pressure Gauge & Oil Level+Dual Test Modes】ANCEL S3000 automotive smoke machine leak detector equipped with pressure gauge helps you observing the change of the gauge value to find small leaks easily. Built-in air pump and smoke generator, does not rely on additional air pump machine, perfect for vehicle repair! Adjustable flowmeter help you controal the amount of smoke easily, viewable oil level let you know when to change oil timely..

Brand New BETOOLL Argon / CO2 regulator and flow meter..
Flow Meters are more accurate than the flow gauge regulators..
The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi..
And this flowmeter does not use a diaphragm, so it is more reliable than the flow-gauge style regulators..
The output flow is adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube..

...ine, perfect for Mobile Automotive Repair! The smoke can be produced within 7-15 seconds, dramatically reducing diagnostic time. Smoke output value: 1-6L/min..
【Flow Meter & Pressure Gauge】According to the pressure of the detection pipeline, it is controlled with a flowmeter to more effectively protect the pipeline from damage. By observing the pressure gauge, you can determine whether the pipeline is leaking more quickly and accurately. Usually the pressure gauge continues to rise, indicating that there is no problem with the pipeline. If the pressure gauge continues to decrease, Explain that the pipeline leak needs to be repaired..
【EVAP Detection】American cars that began production in 1996 are equipped with EVAP service ports.
in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system..

Genuine VICTOR Full Brass Flowmeter with High-Impact Lexan Flowtube..
CGA-580 Inlet Connection for Argon, Argon/CO2 mixtures and Helium. Designed for MIG and TIG Processes..
Maximum inlet pressure: 3000 psi. Precision needle valve. One piece flow tube cover..
Controlled Flow: 5 - 50 SCFH Argon / 20 - 150 SCFH Helium / 5 - 40 SCFH Carbon Dioxide (20% duty cycle) - Temperature: Operating -18 °C - 49 °C (0....
Also available with 5 feet or 10 feet hose. Select your option from the menu..

1.64in Male Thread: Good sealing performance, the water flow sensor can be installed well on the water pipe to measure the fluid flow in the water pipe..
High Sensitivity: The water flow sensor has high sensitivity, high temperature and pressure resistance, and can be started under low water pressure..
Wide Application: The flowmeter can be used in water heaters, drinking fountains, campus credit card machines and other fields..
Premium Quality: The sensor is made of nylon, corrosion resistant and wear resistant, not easy to oxidize, and has a long service life..
Easy To Install: The water flow sensor is light in weight, flexible in appearance, small in size and easy to install and store..

1.VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
2.Accurate Gas Flow Gague：Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube..
3.RELIABLE QUALITY - Our argon flow meter's body is made of high-quality brass, which can withstand harsh environments..
4.OUTPUT:Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting..
5.Hose Included: RX WELD 6.6Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects..

INLET - CGA580 Bottle Connection for argon and argon, CO2, and helium blend bottles.
OUTPUT - Female 9/16" x 18 nut and male 5/"8 UNF-18RH fitting.
The Square flow tube reads from 0 - 60 CFH ,which is indicated by a ball which moves up and down in the flow tube.And has large 1 1/2" diameter pressure gauge which reads from 0 - 4000 PSI. Easy to Read, Accurate.
100% HIGH QUALITY AND STURDY - Flowmeter regulator is made of high quality brass and came with 6.6 Ft argon regulator Hose.

DURABLE MATERIAL: Long-lasting durable brass components that will function for many years without rusting.
SPECIFICATIONS: 1.58″ high pressure gauge: 0-4000 PSI. Flowmeter: 0-15 scfh. Inlet connection: cga-320.
APPLICATION: Perfect for indoor grow rooms, grow tents, green houses, and hydroponics to enhance the amount of carbon dioxide to the growing environment and speed up growth rates and yields by up to 40%..
COMPONENTS :A precision regulator, flow gauge, and industrial solenoid valve, 5 meters free plastic dispensing tubing and USA standard 3-prong plug (Hose tail suit for 4.2 mm inside diameter hose. ).
MULTIPLE OPTIONS: This CO2 Regulator will allow you to maintain ideal CO2 levels for optimal growth.

200 Amp fully assembled 26V Series TIG Torch, designed for welders with Dinse or Stud Connectors or with separate TIG Module or TIG Box..
Choose between 5/16" Terminal, LC-40 cable connectors or Dinse Style Connectors, (Please check Picture #2 for dimensions and characteristics).
Available with 12.5 or 25 feet Cable and Straight or Flexible Head. Torch head with valve for a manual closure of argon flow..
2 Pieces, gas hose is separate from power cable for independent connection with welder gas outlet or directly to the argon flowmeter..
Accessory Kit and Heavy-Duty Nylon Cable Cover are Included. Other accessories might be needed to connect the argon line to your welder or flowmeter.....