ReviewsPressure treated Lumber

Freeman SSNS18-125 18-Gauge 1-1/4 Glue Collated Narrow Crown Staples 1000 Count

Perfect for base boards, crown moulding, trim, door and window casing, cabinetry, and furniture construction.
Compatible with most 18 gauge staplers capable of firing 1-1/4" glue collated staples with a 1/4" narrow crown, such as Freeman's PE4118GF, PE2118G, PXL31, PST9040Q, PST9040, PST9032Q, and PST9032.
304 solid stainless steel for strength and durability.
Stainless steel narrow crown staples won't corrode and stain natural finish wood or pressure treated lumber.

Check out our Threads! Our patented thread serration technology allows the screw to be driven faster, reduces splitting in wood, and reduces driving torque by 40 percent. Let the SPAX FACTOR take some of the hassle out of your next project.
The ideal replacement for the conventional lag. IRC/IBC Code Compliant: TER-No. 1912-08.
True to size thread diameters, grade 5 heat treat, and the washer head style are just some of this fasteners distinct advantages. Tested under the toughest scenarios to give you confidence in every connection.
The HCR (High Corrosion Resistant) double barrier coating is tested and recognized for use in ground contact and pressure treated lumber for exterior fresh water general construction applications.
SPAX 1/4-in. Hex PowerLags require a 3/8-in. Hex Driver.

Silicone coat allows the blade to slice easier through material reducing pitch and resin buildup when cutting pressure-treated lumber..
Construction-grade carbide teeth deliver longer blade life. Every other tooth is thinner for faster cuts..
The innovative heat vent/expansion slot design reduces vibration for longer life and straighter cuts. Plate is fully hardened to run truer, longer..
120 tooth count with optimized, symmetric 60-degree tooth design is ideal for cuts to gutters, vinyl siding and PVC piping..

Efficiency - 10% more nails per collated strip means less reloading.
Durability - Offers high corrosion resistance in LVL, including ACQ and MCQ.
Low Maintenance - Polymer coating on round nailhead reduces staining and streaking by 80% compared to traditional Hot Dipped Galvanized framing nails.
Increased Productivity - Paper tape collation means no job site debris to clean up.
Expert Approval - IRC R319.3 code approved for use in pressure-treated lumber in accordance with ASTM A 154.

Ideal for base boards, crown moulding, furniture construction, chair rails, door and window casing, and cabinetry.
Compatible with most 16-gauge nail guns capable of firing 2-1/2" glue collated straight finish nails, such as Freeman's PE20VFN64, PE20VT64, G2FN64, PFN64, and PFN64NQ.
Solid stainless steel for strength and durability.
304 stainless steel straight finish nails won't corrode and stain natural finish wood or pressure treated lumber.

Silicone coat allows the blade to slice easier through material reducing pitch and resin buildup when cutting pressure-treated lumber..
Construction-grade carbide teeth deliver longer blade life. Every other tooth is thinner for faster cuts..
The innovative heat vent/expansion slot design reduces vibration for longer life and straighter cuts. Plate is fully hardened to run truer, longer..
24 tooth count blades are ideally suited for framing, ripping, and deck jobs..

Opaque Finish Completely Hides Wood Grain & Provides Maximum Protection Against Fading & Graying Caused by Damaging UV Rays.
Acts as Both a Stain and Sealer for Your Wood - Use Over Top of Existing, Solid Color Wood Stains (that still have good adhesion).
Available in 6 Beautiful, Solid Color Finishes That Dry to a Flat, Natural Looking Finish.
Low Odor Stain, Water-Based Cleanup - Low VOCs (.
For Use on all Horizontal and Vertical Wood Surfaces Including Pressure Treated Lumber, Pine, Cedar, Fir, Redwood, Mahogany, & More.

ITW Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durability that enable them to....
Coated to improve corrosion resistance in treated lumber and other applications.
Washer increases bearing surface against the material to be fastened.
Designed for use in treated lumber applications.
Meets the requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel.

Opaque Finish Completely Hides Wood Grain & Provides Maximum Protection Against Fading & Graying Caused by Damaging UV Rays.
Acts as Both a Stain and Sealer for Your Wood - Use Over Top of Existing, Solid Color Wood Stains (that still have good adhesion).
Available in 6 Beautiful, Solid Color Finishes That Dry to a Flat, Natural Looking Finish.
Low Odor Stain, Water-Based Cleanup - Low VOCs (.
For Use on all Horizontal and Vertical Wood Surfaces Including Pressure Treated Lumber, Pine, Cedar, Fir, Redwood, Mahogany, & More.

Your purchase includes one Dewalt table saw, 10inch 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches, blade guard assembly manual.
Other Specs: Max rip to left of blade – 22inch | Max rip to right of blade – 32-1/2inch | Max width of Dado – 13/16inch | Arbor size – 5/8inch | Amps – 15 | Depth of cut at 45inch – 2-1/4inch | Depth of cut at 90° – 3-1/8inch | No Load Speed: 4800 RPM.
Rolling stand designed for easy set up and breakdown with excellent stability.
Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate.
Features a 15.0A high torque motor with the power to cut pressure treated lumber and hardwoods.

Your purchase includes one Dewalt table saw, 10inch 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches, blade guard assembly manual.
Other Specs: Max rip to left of blade – 22inch | Max rip to right of blade – 32-1/2inch | Max width of Dado – 13/16inch | Arbor size – 5/8inch | Amps – 15 | Depth of cut at 45inch – 2-1/4inch | Depth of cut at 90° – 3-1/8inch | No Load Speed: 4800 RPM.
Rolling stand designed for easy set up and breakdown with excellent stability.
Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate.
Features a 15.0A high torque motor with the power to cut pressure treated lumber and hardwoods.