ReviewsProbe Bnc

Goupchn Universal P6100 Oscilloscope Clip Probes 100MHz with Accessories Kit 1X 10X 2 Pack

  • Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
  • Oscilloscope probe attenuation can be adjusted with a 1X or 10X sliding switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
  • The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
  • Adjustable oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
  • Package includes: 2 x probes, 8 x marker rings, 2 x ground wires, 2 x ic test protection caps, 1 x adjustment tool, 1 x user manual..
Check Stock

Goupchn Oscilloscope Clip Probes 200MHz Fully Insulated BNC End Probe with Accessories Kit 1X 10X

  • Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
  • Oscilloscope probe attenuation can be adjusted with a 1X or 10X sliding switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
  • The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
  • Adjustable oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
  • Package includes: 2 x probes, 16 x marker rings, 2 x ground wires, 4 x locating sleeves, 1 x adjustment tools, 1 x ground springs, 1 x user manuals, 1 x oscilloscope link adapters..
Check Stock

Hantek CC-65 AC/DC Current Clamp Meter Transducer for Digital Multimeter Oscilloscope with BNC Type Connector

  • Hantek amp clamp AC/DC frequency range: Up to 20 kHz.
  • hantek cc65 Effective Measurement Range: 20mA to 65A DC.
  • The oscilloscope current probe is with Accurate circuit measurement and suitable for DSO.
  • Hantek CC-65 amp clamp is Friendly in use: turn on, clamp it over a conductor, and get a reading.
  • The current probe is with Output: BNC connector.
Check Stock

OWON Current Clamp Meter Multimeter CP-05+ Clamp Current Probe 200KHz 400A for Oscilloscope 4A 40A 200A 200-400A Test Range with BNC Connector

  • ¡¾BNC connector¡¿The current clamp Multimeter features a BNC connector and can be plugged directly use. After connected well, switch the current clamp on (power LED should light) and then clamp the jaws around the current carrying conductor as shown. Typical Uses The AC/DC Current Probe simply offers the best value for money without compromising resolution..
  • ¡¾Multiple Test Ranges¡¿The OWON CP-05+ current clamp is ideal for use with automotive oscilloscopes for measuring currents between 1 mA and 400 A. Various current test range, 4A, 40A, 200A, 200-400A test range are available.Low noise level, and high detection accuracy..
  • ¡¾Easy to Use¡¿The current clamp has range selection settings, set by a slider switch on the handle of the probe. In use there is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current carrying conductor. No electrical contact is required. These current clamps have been designed for use with oscilloscopes..
  • ¡¾Portable¡¿Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra....
Check Stock

Bluelab PROBPH pH Probe for Water, Replacement Electrode for Meter, Monitor, and Controller with Easy Calibration, Tool for Hydroponic System and Indoor Plant Grow

  • Measures pH in nutrient solution (acid or alkaline) for precise up and down adjustment and is used with meters.
  • General uses include growing tent, reservoir, water tank, and hydroponics.
  • 2 meter / 6.56 foot standard cable, easy calibration, fully waterproof including cable joint, easy to clean and maintain.
  • Double junction probe has a longer lifespan compared to standard probes due to less contamination and is more accurate and reliable than comparable pens, test strips, drops, and more.
  • Combine with Bluelab tester, meter and other controllers for full garden nutrinets monitoring in water and soil.
  • KIT INCLUDES: Cable, probe holder, storage cap, BNC connector, probe care kit is sold separately.
  • Supplied by Bluelab, the industry leader in hydroponic testing equipment, built for growers.
  • 6-Month Limited Warranty with proof of purchase.
Check Stock

Cal Test Electronics CT2838A 9 Piece Oscilloscope Probe Accessory Kit

  • Kit includes: (1) BNC adaptor, (1) sprung hook, (1) replacement tip, (1) tip insulator, (1) IC lead tip insulator, (1) tip ground, (1) trimmer tool, (2) identifier rings.
  • 9 Piece kit of the most common 5 mm scope probe accessories.
  • Excellent for getting started or replacement for worn or lost original devices.
Check Stock

OWON HDS272S 3.5\ LCD 2CH Handheld Oscilloscope 70MHz Bandwidth 20000 Counts Multiumeter OSC + DMM+ Signal Generator 3 in 1 Suitable for Automobile Maintenance and Power Detection

  • OWON HDS272S 2.8" LCD 2CH Handheld Oscilloscope 70MHz Bandwidth 20000 Counts Multiumeter OSC + DMM 3 in 1 Suitable for Automobile Maintenance and Power Detection.
  • Package includes: 1 x Main device 1 x Bag 1 x Probe 1 x Power Plug(EU type) 1 x Probe Adjust 1 x USB Cable 2 x Multimeter Leads 1 x Instructions 1 x CD Rom 1 x BNC to Alligator Clip Note: We will send you a plug adapter according to your country..
Check Stock

AEMC Instruments 2112.48 - 3000-36-1-1 AmpFlex Flexible Current Probe - 36\ 3000A w/1mV/A Output

  • Accuracy: +/-(1.5 percent +20mA basic accuracy).
  • Adapter output: 10mV per 1A or 100mV per 1A.
  • BNC connector with removable banana plug adapter output connection type.
Check Stock

AUTOUTLET P6100 Universal Oscilloscope Probe with Accessories Kit 100MHz Oscilloscope Clip Probes with BNC to Minigrabber Test Lead Kit

  • Universal Oscilloscope Probes 10:1 and 1:1 Switchable Bandwidth 100MHz.
  • Usable with Scopes having Bandwidth up to 100 MHz.
  • Interchangeable Probe Tip. High Sensitivity, Excellent Performance and Reliable Function.
  • Used with Oscilloscopes from All Manufacturers , Equipped with The Standard BNC Connector..
Check Stock

Parco Scientific PB00131 Bacterial Model | 10000X Enlarged | Prokaryotic Bacteria Cell | Shows Cell Wall, Cytoplasmic Membrane, Cytoplasm, Nucleoid, Ribosomes, PILI and Flagella | Manual Included

  • Apera's unique platinum black conductivity sensor, ensuring high accuracy in a wide range.
  • Equipped with a probe storage cap, keeping the sensor hydrated when not in use.
  • Works with any conductivity meters with BNC connector.
  • K=1.0, measurement range: 0.5µS/cm to 200 mS/cm.
Check Stock

2-in-1 Combo pH & Temperature Meter Water Quality Tester Replaceable BNC pH Electrode for Aquariums Hydroponics Tanks Aquaculture Laboratory

  • MEASURING RANGE: 0.00~14.00pH and 0~55°C (32~131°F) Temperature with ATC so temperature change can't affect on pH level measurement..
  • APPLICATIONS: Great for student, professional and even personal used in achieving the correct pH and temperature level in water quality monitoring and analysis..
  • FEATURES: Separate electrode to avoid contamination, composed of replaceable BNC type electrode and fixed temperature probe.
  • POWER SUPPLY: 4 x 1.5V AG13 button battery or 6V DC power adaptor ideal for continuous monitoring.
Check Stock