ReviewsProfessional Tubing Flaring Tool Kit

4LIFETIMELINES Flaring Tool – Professional Turret Brake Line Flare Tool – 5 Tubing Sizes – Compatible with Stainless Steel Copper Coils

  • 5 TUBING SIZES: The 4LIFETIMELINES heavy duty turret brake line flare tool allows you to create 45 degree highly precise double, single and bubble flares in 5 sizes of tubing, 3/16″, 1/4″, 5/16″, 3/8″ and 4.75mm..
  • COMPATIBLE MATERIALS: This brake flaring tool can work with stainless steel, steel and nickel copper tubing, being a smart and practical solution for brake lines, fuel lines and transmission cooler lines..
  • EASY TO USE: Unlike similar products on the market, this professional flaring tool features a quick-release T handle ensuring fast holder die changeovers for a smooth and user-friendly experience..
  • CONVENIENT TURRET CARRIER: Keep all your dies ready, available and within immediate reach with the convenient turret carrier, which saves you the hassle of groping for small parts or losing them!.
  • PRECISION IS KEY: Keep your brake flares and brake system safe and at optimal length with this highly precise and accurate flaring tool, which requires minimal time, effort and cost!.
Check Stock

Prima Causa HVAC Flaring and Swaging Tool Kit Flares Soft Refrigeration Copper Pipe with Tubing Cutter & Ratchet Wrench

  • Easy operation, save time and energy. Versatile tool kit in a combination tubing flaring and swaging to fit all your needs.
  • For 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. Tubing. 5 Swage Adapters For: 3-in-1 (3/16",1/4",3/8") ,5/16",1/2",5/8"& 3/4" O.D.Tubing.....
  • The special cone eccentric revolution allows the internal opening gradually and accurate from 45° and regual flare without effor, preventing tube....
  • Eccentric cone will be rebound automatically after the work is finished, make the idle top head in revolution again for 1-2 times and have the flare....
  • Flaring tool kit is supplied in a Blow Mold Case.
Check Stock

VEVOR Hydraulic Flaring Tool Kit 45° Double Flaring Tool Brake Repair Brake Flaring Tools for 3/16 -1/2 Brake Flare Tool with Tube Cutter and Deburrer 32 PCS Tube Flaring Tools for Copper Lines

  • Tube Expanding Functions: This hydraulic flaring tool is equipped with a 45° flaring cone and φ 3/16 - 1/2 inch expanding dies and adapters, including, push connects, GM fuel lines, GM transmission cooling line, 45° and double flares, ISO bubble flares..
  • Manual Hydraulic Mechanism: This hydraulic flare kit achieves the pipe expanding with a hydraulic mechanism. The hydraulic tool is designed with exquisite details, such as a pressure relief valve and no-leakage oil cylinder. You can easily operate this tool without effort..
  • Pipe Cutting & Deburring: The double flaring tool comes with a mini pipe cutter and deburrer, which can help to flare pipe. The cutter cuts tubes ranging from 1/8" -5/8" quickly with a solid and sharp blade. The deburring tool is used for cleaning the interior and exterior of tubing..
  • Durability & Portability: The flaring tool is durable 40 CR steel, which is reliable and built to last. Besides, the flaring tool kit is stored in a plastic toolbox, reducing the possibility of missing parts. It is compact and easy to carry..
  • Wide Application: This hydraulic flaring tool kit is suitable for expanding copper piping. It is an excellent tool for repairs on vehicles or making lines off a vehicle, ideal for the refrigeration and ai....
Check Stock

ABN Bubble Flare Tool & Double Flaring Kit – Tubing Bender Flare Tool & Pipe Cutter (1/8in to 5/8in / 3-16mm)

  • MAKE DOUBLE & BUBBLE FLARES: The ABN Double Flare Kit & Bubble Flaring Tool create flares for bending brake and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration, and more.
  • Fixed head and angles make clean, precise flares.
  • Yoke type compressor with T-bar handle for firm grip.
  • For 3/16″, 1/4″, 5/16″, 3/8″, 1/2”, 4mm, 4.75mm, 6mm, 8mm, 10mm steel, aluminum, and copper tubing.
  • QUICK & PRECISE CUTS: Use the included small pipe cutter to cut 1/8-inch to 5/8-inch (3-16mm) steel, aluminum, and copper tubing.
  • Pull back the blade and revolve the pipe while compressing.
  • 2 rollers prevent skipping and jumping for most consistent tracking.
  • Cutting wheel life and adjustment amount for each turn of tool is directly proportionate to the hardness of material being cut.
  • BUILT TO LAST: Swivel constructed from chrome-plated alloy steel to reduce friction.
  • Yoke forged from heat-treated steel for maximum strength and longevity that resists corrosion.
  • EASY STORAGE: Heavy-duty 11.9” x 2.8” x 9.2” inch (30.2cm x 7.1cm x 23.4cm) plastic blow-molded carrying case with latches and handle for easy transportation, safe storage, and quick organization.
  • Includes double flaring and bubble flaring instruct....
Check Stock

Amerbm Professional Brake Line Flaring Tool 45 Degree Set Single Double and Bubble Flares Tool Kit for Steel Copper Tube

  • 45-degree tool set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
  • For 3/16", 1/4", 5/16", 3/8" diameter lines..
  • This flaring tool is designed to be mounted in a vise, and the T-handle screw clamp securely keeps the die and tubing in place, so you can create flares quickly and easily..
  • The "turret-style" design allows you to make those precision flares in a minimal time, which saves you the hassle of groping for small parts or losing them..
  • When building car brake lines, the brake flaring tool kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises..
  • The flaring tool set is made of durable steel for reliable and long-lasting performance, high precision and safe to use. With a plastic case, compact and convenient to carry and store..
Check Stock

HVAC Flaring Tool Kit for 1/4 - 3/4 Copper Pipe Flare Tool 45°Eccentric Single Tubing Flaring Tool with Pipe Cutter & Deburring Tool for Copper Aluminum Pipes Refrigeration Air Conditioner Repair

  • The accuracy eccentric cone flaring tool produces 45 Degree flares in soft copper, brass, aluminum or stainless steel pipes. Widely used in HVAC, air conditioners, air heaters, refrigerators maintenance, etc..
  • Our HVAC Flaring Tool Kit comes with 2 types of flaring clamps applicable pipe O.D.Inch: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" Metric: 6mm, 9mm, 10mm 12mm, 16mm, 19mm)..
  • The eccentric flaring cone provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort (NOTE: It will only do single flare - not double flare!).
  • The flare tool is designed with a clutch in the rotating handle, which will automatically disconnect when the flaring is completed..
  • Package includes 1x Flaring Tool, 2x Clamp(inch & metric type), 1x Deburring Tool, 1x Tube Cutter for O.D. 6-50mm tubes, 1x Manual Book, 1x Suitcase..
Check Stock

YAETEK Swaging Tool Kit – Flaring Tool Kit - Tube Cutter Rachet Wrench Swag Tool - 45 Degree Brake Line Tubing Brass Aluminum Copper Extrusion 1/8 to 3/4 for HVAC Water Gas Pipe Automotive Plumbing

  • Sizes of This YaeTek Swaging Flaring Tool Kit: Flare adapters 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" OD.
  • Material: Swivel is made of alloy steel, chrome-plated to assist in reducing friction.
  • Yoke is heat-treated forged steel with max strength and....
  • Do your Brake Line Job: This YaeTek Flaring Swaging Tool Kit 10pc Tubing Flaring Kit includes 2 bars (9 sizes) with a self-centering, slip-on yoke to....
  • A CompleteFlaring Tool kit with necessary tools to complete your job.
  • This Tool makes 45 Degree Flares on soft copper, brass, aluminum and mild steel....
  • Package includes flare adapters, swage fittings, refrigeration wrench to open square valves on hose bibs and acetylene tanks, with a Plastic carrying....
Check Stock

Double Flaring Tool Kit 7 Dies with Tubing Bender (Flare Tool) and Pipe Cutter (1/8” to 1-1/8” Inch / 3-30mm) For Automotive Brake Line Copper Brass Aluminum

  • Complete kit: the flaring kit is all that is included, complete with dual flaring capabilities, allowing the mechanic to focus on the job rather than looking for parts..
  • Extensive torch adapter: double flaring toolset features 7 adapter sizes 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" and 5/8" to help artisan complete the entire range of brake line flaring tool projects..
  • Precision and durability: this twin torch kit is made of the strongest steel material and chrome-plated for easy handling and precision..
  • Double flaring tool: this multi-purpose flaring tool has double flaring function, providing users with a wide range of applications and versatility..
  • Self-centering yoke: the brake line reamer tool consists of two rods covering seven diameters, with self-centering, slideable forged steel yoke to help form a professional and high quality yoke..
Check Stock

Rustark 14Pcs Double Flares Adapters Tool Kit Replacement Head Fit 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8 Inch OD Tubing Expander Double Flaring Tool for Tubing Expander Flaring Replacement

  • ★1.【What You Get】 — We have prepared you with 14pcs double flaring adapters kit in a variety of sizes for your choice, measures 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″ and 5/8″ O.D. tubing, Each size come in 2 pieces. Full range of sizes is convenient for you to choose the appropriate one for your projects..
  • ★2.【Premium Quality】— Made of heavy duty alloy steel material, sturdy and tough, these flaring tool adapters are heat treated for greater durability and excellent performance, which will last for a long time. Besides, the surface is clearly marked the size for quick and easy identification..
  • ★3.【Precise Design】 — Our flaring adapters are precise in size, and have no burr that is easy to fit the compatible flaring tools. It is convenient for you to choose the right size that fit for your specific needs. Give them a try!.
  • ★4.【Widely Used】These flaring adapters are great for brake line, fuel line, air condition and refrigeration repair applications. Widely applied when flaring in copper, aluminum, magnesium, and brass tubing as well as soft steel brake line tubing..
  • ★5.【After-Sale Service】 – If you have any questions about our products or any problems with your packages, please feel free to contact us. ....
Check Stock

MASTERCOOL 70058-A Black 45˚ Eccentric Flaring Tool Kit

  • ALUMINUM DESIGN ensures durability while also being light weight for easy portability.
  • CREATE 45˚ FLARES in soft copper, brass, aluminum and mild steel tubing.
  • FLARES SIX SIZES including 1/4, 5/16, 3/8, 1/2, 5/8 and 3/4″ O.D. Tubing.
  • KIT COMES IN BLOW MOLDED PLASTIC CASE with eccentric flaring tool, inner-outer reamer and heavy duty tube cutter for 1/8 – 1 1/8” O.D. Tubing.
Check Stock

LORESO Brake Line Flaring Tool Kit with Swaging Tool Set for 45° Single Flares on Copper Aluminum Brass and Soft Steel Lines Professional Repair and Replacement

  • Professional Flaring and Swaging Tool Kit – A full-service brake line kit with swage tool and other essential accessories this brake line repair kit....
  • Versatile Equipment Compatibility – Our brake line and swage tool kit can be used in copper, aluminum, brass, magnesium, and soft steel lines to....
  • Expanded Sizes to Suit Every Job – This 45° flaring and swaging kit with cones, bars, fittings, tube cutter, and ratchet wrench features sizes....
  • Compact, Portable Storage Case – Each flaring and swage tool set comes with a heavy-duty storage organizer to make it easier to use in a....
  • Trusted Quality, Durability, and Resilience – Here at LORESO we make tools that support rugged jobs and precision craftsmanship which is why every....
Check Stock