ReviewsProfile Cutting Machine

IRWIN Tools Coping Saw Blades, Coarse, 3-pack (2014500)

  • Designed for use with your existing ProTouch coping saw.
  • Replace damaged or worn-out coping saw blades.
  • These coarse coping saw blades have a tooth count of 17 pt..
  • Use a coping saw for cutting the curved profile on crown, base or chair-rail molding.
Check Stock

Masmoc 4\ Metal Handwheel Fit 1/2\ Shaft of Table Saw Drill Press Lathe Turning CNC, Round Hand Wheel Crank Come with Set Screws and Disassemble Handle

  • This handwheel is designed with consumer convenience in mind,the item provides everything you all need including 4pcs SET SCREWS (2PCS is the backup one) and installing hex key wrench. Insert the shaft into the hole in the handle hub and tighten the provided set screw and a solid construction immediately is finished.It doesn't matter if the shaft is star, key-way, hexagonal, or smaller than 1/2”.
  • Handwheel Total Diameter: 100 mm / 4 inch, Center Bore Diameter (approx.): 12 mm / 1/2 inch. The package comes with 1 pcs round handwheel, 1pcs handle,4PCS SET SCREWS, 1pcs hex key wrench.
  • The hand crank wheel is made of metal material and the handle is made of high quality phenolic resin, with strong insulation and durability.
  • Masmoc handwheels is fit for 1/2” or smaller shaft but it can be expanded to expand the scope of use.
  • Widely used in industrial machine tools, such as Universal or horizontal - handle crank wheel on CNC milling machine bed.Universal or horizontal - handle crank wheel on CNC milling machine bed,Surface rotary Grinder Machine, Cylindical grinder, sharing machine,Boring machine, profile cutting machine, Turning CNC,Table saw, Band saw, Radial arm saw, Contractor saw, Cabinet Saw.
Check Stock

Imachinist S981214 Band Saw Blades Cutting Soft Ferrous Metal 98\ X 1/2\ X 14tpi M42 Bi-Metal

  • Bi-metal type, HSS M42 grade, 98" long, 1/2" wide, 0.025" thick, 14TPI teeth profile.
  • 14tpi is suitable for cutting thin pipe tube profiles etc.
  • 14tpi is fixed teeth profile, teeth distance is 1.8mm per teeth.
  • Suits all bandsaws which use 98" long, 1/2" wide bandsaw blade.
Check Stock

4.25" Bench Vise, Drill Press Vice Heavy Duty with 110° Swivel Base and Quick Release for Low-Profile Woodworking, 4-3/8 inch Max Opening 1-1/8 inch Jaw Depth

  • ...jaws together to quickly position and clamp. No need to turn screws to tighten! There are four 1/2" shoulder slots for quick, easy positioning on the machine table..
  • 【110° Rotation】Built with a 110 degree swivel base, this drill press vise is versatile. The smooth guide rail makes for effortless use and the low profile clearance provides increased working space on the machine table..
  • ✌️【Universal Vise】Maximum opening up to 4-3/8'', jaw width 4.25''. Base clamping range increased to 1.18'' for various Low-Profile Drills. Designed for workshop, professional use, general purpose and light work, and ideal for woodworking, cutting conduit, drilling, gluing, metalworking, tapping, reaming, sawing and more!.
  • 【High Quality】Made of high-grade cast steel - The surface is sprayed to enhance corrosion-resistance and to make it more smooth to the touch. The jaw is hardened and hammered to increase its hardness and strength, providing long-lasting durability and reliable grip saving you time and effort..
  • 【Satisfied Service】Accessory kit includes 4 screws. Products come with a 3 year manufacturer’s warranty. For any problems or issues, simply call our 800 number and we will provide you with timely five star service..
Check Stock

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....
Check Stock

Imachinist S64514 Bi-Metal Band Saw Blades 64-1/2\ X 1/2\ X 14tpi for Cutting Soft Ferrous Metal

  • Bi-metal type, HSS M42 grade, 64-1/2" long, 1/2" wide, 0.025" thick, 14TPI teeth profile.
  • 14TPI is suitable for cutting thin pipe tube profiles etc.
  • 14tpi is fixed teeth profile, teeth distance is 1.8mm per teeth.
  • Suits all bandsaws which use 64-1/2" long, 1/2" wide band saw blade.
Check Stock

Invisible Man

  • A small investment can make a huge improvement in the cutting performance of your machine.
  • Getting the best cutting performance from your Prestige Pro machine can be as simple as changing the PR standard cutting pad.
  • This PR Standard Cutting Pad measures 9 7/8" x 18"..
  • The many significant advantages of the extended length of this PVC vinyl Cutting Pad are an increased work surface, the ability to shuttle multiple dies through the machine for quicker cutting and for easy registration of ClearCrop Dies..
  • Cutting pads need replacement generally after 4-6 months.
Check Stock

NEXT BY DANCO Zero Cut Bolts | Brass Toilet Mounting Bolts | Toilet Repair | White Bolt Caps |Toilet Bolts Screws (10770)

  • ADJUSTABLE HEIGHT BOLTS WITHOUT CUTTING – extension of up to 3 inches for just the right height with NO CUTTING required and comes with ALIGNMENT bullets that guides you to position toilet with ease. UPPER BOLT screws into doble threaded body while the LOWER BOLT retracts and tightens from below with extender included so bolts work with any toilet.
  • WORKS FOR ANY TOILET INSTALLATION – if toilet bowl flange is above, below or flush with the floor our Zero Cut toilet mounting bolts can adjust to most situations.
  • SLIDING ADAPTERS tighten the bolts and attach the low-profile bolt caps.
  • NO TOOLS OR CUTTING REQUIRED and will not damage or scratch the enamel..
  • PACKAGE INCLUDES (2) stainless steel bolts, (2) lock nuts, (2) brass tee bolts, (2) alignment bullets, (2) brass extenders, (2) slide adapters, and (2) low profile caps.
Check Stock

Imachinist S62121418 62\ Long, 1/2\ Wide, 0.025\ Thick, Bi-Metal Band Saw Blades for Metal Variable Teeth (14/18TPI)

  • Bi-metal type, HSS M42 grade, 62" long, 1/2" wide, 0.025" thick, 14/18TPI.
  • 14/18TPI is suitable for cutting tube and profile, do not cut any non-ferrous metal like aluminum etc..
  • Suits all bandsaws which use 62" long, 1/2" wide bandsaw blade.
Check Stock

Imachinist S62121014 62\ Long, 1/2\ Wide, 0.025\ Thick, Variable Teeth Bi-Metal Band Saw Blades for Soft Ferrous Metal (10/14TPI)

  • Bi-metal type, HSS M42 grade, 62" long, 1/2" wide, 0.025" thick, 10/14TPI.
  • 10/14TPI are suitable for cutting tube and profile.
  • Suits all bandsaws which use 62" long, 1/2" wide band saw blade.
Check Stock

DITKOK Galvanized Steel Window Dryer Vent for 4" Dryer Vent Hose, Fit 26" - 36" Vertical Sliding Window Adjustable

  • The 4 inch adjustable air intake window vent by DITKOK was designed to provide the perfect solution for those that need to vent out of a window..
  • The window dryer vent is made with 24 gauge galvanized steel and has an aluminum back draft damper to prevent drafting from outdoors,and also prevent birds from nesting in the vent..
  • Simply place the vent in the open window, slide the side panels to fit the window opening (26" - 36" windows), and close the window. We designed this vent with an enlarged shroud to minimize airflow resistance. Don't worry the standard low profile dryer vent cover adds considerable resistance to airflow..
  • This window vent isn't just for the dryers, it can be used in paint booths, laser engravers, exhaust fan blowers, and just about any other device with a 4" circular exhaust..
  • We provide one year warranty. Note: The scratches on the surface are caused by the laser cutting machine during the cutting process, which is unavoidable, please understand..
Check Stock