ReviewsProfiling Tool Holder

Micro 100 UP-50062-24 Grooving Tool - Undercut, 1/16\ Width, 1/8\ Proj.195\ Angled Proj.490\ Min Bore Dia, 1-1/2\ Max Bore Depth.240\ Offset, 1/2\ Shank Dia, 3\ OAL, Uncoated

Designed for plunging full radius undercut grooves and profiling.
Polished split face for improved edge retention and chip evacuation while reducing galling.
Lockdown flat automatically locates tool on center.
AlTiN coated option provides added lubricity and increased wear resistance in difficult to machine materials.

Check Stock

Datacolor Spyder Print S4SR100,Black

Profiling Speed and Accuracy - The strip reading Spectrocolorimeter creates custom profiles in minutes with easy-to-read targets for color and black and white. Includes the improved SpyderGuide for convenience in creating profiles easily and accurately..
Easy-to-use Profiling Software - Usability is so improved in this step-by-step process you don't need an extra manual - it's quite intuitive!.
Softproof within the Application - Unique SpyderProof function gives you a series of carefully selected images to evaluate detail from a photographer's point of view. Profile Softproof available for each unique printer profile..
Total control for gallery quality prints and extensive editing capabilities..
Datacolor and Adobe work hand-in-hand to offer the complete package for your photography workflow. Get a complimentary Adobe Creative Cloud Photography plan - 90 day trial with your Spyder purchase. A redemption code will be sent upon Spyder activation..

Check Stock

Mangar Leg Lifter for Elderly - Attachable & Detachable to Bed Mattress, Lightweight, Portable & Discreet

LEG LIFTER FOR SENIOR: Suitable for people with reduced mobility and those who from injury or surgery, including knee and hip replacement surgery. It can also be used as an auxiliary tool for patients with arthritis and leg weakness..
HEARTWARMING DESIGN: Fits most beds, (including profiling beds). Lifts legs into bed independently. Detachable cover supplied. Portable, lightweight and discreet..
FUNCTION & CARE: Minimizes risk of back injury to carer by reducing or eliminating moving & handling..
RELIABLE HEALTH CARE: It is straightforward to fit or remove and requires no permanent installation. When not in use the Leg Lifter sits discreetly against the side of the bed..
DAILY LIVING AIDS: Lifting legs into bed can often prove difficult. Our inflatable Leglifter provides valuable assistance with lifting legs into bed. The Leglifter is attached to the bed underneath the mattress..

Check Stock

Maxmartt 5pcs ISO30 Tool Holder Clamp Cradle Claw Set CNC Machines Automatic Tool Changer

tool holder 100% brand new and high quality..
cnc tool holder Designed for any type of ISO30 tool holder and automatic tool change system..
iso30 tool holder clip Professional manufacturing, perfect match with the tool holder..
iso30 tool holder clamp Made of high quality PVC material, wear resistant, heat resistant..
clamp tool holder Stable performance, anti-aging, acid and alkali resistant..

Check Stock

CDBP GTN-2 (SP200) CNC Grooving Carbide Inserts Steel Fit for SPB226/232 Lathe Grooving Cutting Tools, CVD Yellow Coating, 10pcs

Size, SP200,Width(B): 2.18mm, Radius(R): 0.2mm, Longth(L): 8.9mm, fit for Korloy grooving holder..
CVD coated yellow color grade, universal grade, suitable for steel and cast iron continuous cutting and interrupted cutting.
Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. A high the thermal shock resistance, suitable for light interrupted cuts..
CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..

Check Stock

Wkstool Φ6mm,Micro Solid Carbide Drill Bits,Straight Shank,TiAlN Coated,Metric,for Stainless Steel,Alloy and Hard Steel (Ø6mm -30mm Flute Length-60mm Full Length, for Steel)

T.I.R.(Total Indicator Reading):Maximum 10um(0.01mm).
Made of Solid Micro carbide(Tungsten Steel,HRC55),High quality TiAlN coating,getting long tool life..
Suitable for profiling Alloys,Aluminium,Copper,Stainless steel,Iron and Hard steel....
High hardness,High Performance.Good surface roughness.can be high-speed machine processing..

Check Stock

New Sekonic L-478DR-U-PX Lightmeter With Exclusive 3-Year Warranty

Full featured Ambient-Flash modes including new T-F mode. Measure, compare, and mix ambient and flash displayed on a color, touch screen for beautiful, controlled, results. DTS Exposure Profiling matches the meter to the performance of your camera. Precise exposure and lighting starts with precise, repeatable metering. Radio triggering and Flash Power Setting w/ flashes with Sky port receivers. Flash Group selection and power control with a touch of a finger/HD Cine modes for today's HDSLR and Video Cine cameras. Effortlessly switch between HDSLR and Cine for exact exposure settings in exact increments for both. Infinite frame rate and shutter angle selection. Create special settings for special applications. Video cine cameras are becoming boundless. Unique, light-source filtration compensation mode. Finally, precise control lighting using industry standard CTO/CTB/ND types at the touch of a finger. Illumination measurement and extended ISO range. Lighting design and exposure in a single tool. ISO and exposure settings to match today's digital cameras. Exclusive 3-Year USA Warranty..

Check Stock

CLC Custom LeatherCraft 5-Pocket Cell Phone/Tool Holder - 1105

EVERYTHING YOU NEED: With this cell phone, tool, and accessory holder you can hang, strap, or clip on work belts, web suspenders, pants, etc..
COMPACT PHONES: This cell phone and tool holder holds most brands of compact phones.
VERSATILE TOOL HOLDER: This cell phone holder and tool holder 3-way attachment for pants, web suspenders, work aprons, and more..

Check Stock

Niagara Cutter 17016418 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, TiCN Finish, Finishing Cut, 30 Degree Helix, 4 Flutes, 3.25' Overall Length, 0.500' Cutting Diameter, 0.500' Shank Diameter

4 Flute design for creating finer finishes and creating a higher metal removal rate.
General purpose end mill for working on all types of materials.
Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
Titanium Carbonitride(TiCN) allows for optimal end mill and machine tool performance with it's ability to increase material removal rates 3 to 5 times that of uncoated tools.
Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling and slotting.

Check Stock

CDBP GTN-4 (SP400) CNC Grooving Carbide Inserts Steel Fit for SPB426/32 Lathe Grooving Cutting Tools, CVD Yellow Coating, 10pcs (BP400-P)

Size, SP400,Width(B): 4.14mm, Radius(R): 0.25mm, Longth(L): 11mm, fit for Korloy grooving holder..
CVD coated yellow color grade, universal grade, suitable for steel and cast iron continuous cutting and interrupted cutting finishing to roughing. Grade with a wide range of applications. Stainless steel continuous cutting and interrupted cutting..
Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. A high the thermal shock resistance, suitable for light interrupted cuts..
CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..

Check Stock

Custom Leathercraft DEWALT DG5173 Heavy-duty Construction Tool Holder, 4 Pocket Black, fits belts up to 2-3/4\ wide

MULTI POCKET TOOL HOLDER: This tool holder is designed for pliers, snips, cutters, pencils, markers, etc..
STORAGE FOR ADDITIONAL ACCESSORIES: This DEWALT tool holder has a steel measuring tape clip, webbing loop, and a loop to hang keys on..
DURABLE TOOL HOLDER: This tool holder is made with ballistic poly material for added durability..

Check Stock