ReviewsProgrammable Power Supply Module

ARCELI ESP-12E ESP8266 UART WiFi Wireless Shield Compatible with Arduino UNO R3

Standard pin interface to achieve full compatibility with the pitch Arduino Uno, Mega and so on. (Unless the standard size arduino, such as Nano, Mini).
3.3V power supply using advanced chip (with the official expansion board power chip CC3000 same), so 3.3V Arduino board provided more accurate, so ESP8266 as official cc3000 chip work as normal, there is no gap..
It leads to a WiFi module power supply / service interface to facilitate developers to extend the power supply and maintenance..
Onboard ESP8266-12 stable industrial grade serial WiFi module, using an enhanced PCB antenna, signal better..

Check Stock

AITRIP 2PCS Type-C USB CH340 5V 16MHz for Nano Board CH340/ATmega+328P , Type-C Connection Compatible with Arduino Nano V3.0

The Nano can be powered via the Type-C USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
Support for external 5V~12V DC power supply, Support power supply by 9V battery..
The Nano is using the chips ATmega328P and CH340, Replace FT232RL.
The Nano-C is breadboard-friendly and can be powered by USB, regulated 5V supply or unregulated 7-12V source. Connectors shipped unsoldered to fit the smallest of spaces.
Comes with 2packs of Nano V3.0 Micro Controller Module, each Nano V3.0 Micro Controller module is equipped with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers), no welding needed..

Check Stock

4Pcs INA219 I2C Bi-Directional DC Current Power Supply Sensor Breakout Board Module I2C IIC Interface

INA219 module is an I2C interface with a drift, bi-directional current / power monitor integrated circuit (IC), and further expand the energy-saving....
INA219 I2C Bi-directional DC Current Power Supply Sensor, Working Voltage 3~5V.
INA219 module small size, low cost, high accuracy. It not only can monitor the voltage drop across a shunt resistor on the sensing shunt supply....
INA219 can be achieved within the maximum error accuracy of +1% from -40° C to 85° C temperature range, the maximum offset is 100 uV. The....
Appliaction:The module is used for I2C port zero drift / bidirectional current / power monitoring sensor module. The device is available in a SOT23....

Check Stock

Pokemon Box Ruby & Sapphire (w/ GBA Link Cable & Memory Card 59) [Japan Import]

【Programmable Sound Module】Provide more possibilities to develop a module completely fit for your own project. You can select different trigger mode (button/TTL trigger) by connecting with different soldering pads..
【Button Control】 Install it in your project/gift, and then push the button. Your music which you put in it will be played once and automatically stop when the song finishes. This item comes with the button and default mode: 000..
【8M Memory】Built-in 8M memory with micro USB port, you can update the music just by a smart phone USB cable. It is recognized by computer as a USB drive, just like a MP3 player, and you’re free to add any MP3 audio file to the internal storage as long as it doesn’t go over the 8MB limit..
【With Battery Box and USB Cable】This Kit contains with a AAA Battery Box and USB Cable, with which you can easier to supply 4.5-5V power and also used for different USB devices to download the MP3 audio file to the internal storage..
【Perfect Creative Gift】It is ideal to make a DIY music box, musical greeting cards, photo frames, album, gift box and the other creative gifts for Christmas’s Day, Mother’s Day, Valentine’s Day. Any further question please don’t hesitate to contact us via E-mail to get te....

Check Stock

Heayzoki Power Supply Module for Raspberry Pi 4B / 3B + Ethernet POE Fan Electronic Component,for Raspberry Pi Ethernet POE Fan Power Supply Module

This product provides a convenient and cost-effective way to power equipment..
This module allows you to apply DC voltage to specific pairs of Ethernet cables so that devices connected to the network can use it as a power source..
This module is ideal for any PoE application with limited space, such as IP cameras, biometrics, readers, network audio, etc..
For Raspberry Pi Ethernet POE fan power supply module, supports for Raspberry Pi 4B/3B+, provides clean and reliable power supply..
With small size, easy to carry and store, convenient to use and with good performance..

Check Stock

DollaTek 5Pcs SW-420 NC Type Vibration Sensor Module Vibration Switch

Shipping list: 1 channel 24V vibration sensor plus relay module with 1 meter long shock sensor.
6-24V wide voltage power supply stable version With 1 meter long vibration sensor module, this module has no vibration delay function..

Check Stock

NOYITO 2-Channel 5V Computer USB Control Switch Relay Module Drive-free relay module Plug and Play Suitable for PC Smart Controller

The module uses HID technology, without any driver, plug and play. Support WIN7,10, XP 32-bit, 64-bit system, easy to use simple..
Onboard square USB interface, stable connection.
use of high-performance USB control chip.
use dedicated relay driver chip ULN2803, relay work more stable.
Power outlet and terminal, two access power mode convenient and flexible. After connecting the power, even if the computer shut down or USB from the computer pull out, the relay can also maintain the set state..
【NOTE: The 1-Channel 2-Channel module does not require an external power supply. 4-Channel 8-Channel modules require an external module power supply. 】PCB size: 56.5mm * 40.6mm, fixed hole size: 3mm, fixed hole center moment: 52.2mm * 36.6mm..

Check Stock

9V Power Supply for Korg Volca Syth Bass, Beats Rhythm, Keys Loop Synthesizer, Korg KA350 KROSS-61 KROSS-88 Replacement Korg Volca Power Supply Cord

Replacement Korg power supply specifications: worldwide input voltage range: 100-240V 50/60HZ.
Output: 9V 2A, Power 18W Max. Long power cord with 6.5FT total. The extremely long power cord of Korg volca power supply is sufficient for indoor use. Strain-eliminated tail cards for greater usability and resistance to flexing..
Replacement Korg KA350 Power Supply Compatible with: Korg KA350, KROSS，KROSS2，RK-100S，microKORG S，microKORG XL+，KAOSSILATOR PRO+，KAOSS PAD KP3+，volca keys，volca bass，volca beats，volca sample，volca sample OK GO edition，volca fm，volca kick，volca mix，volca modular，volca drum，volca nubass.【Please confirm the specifications, if you cannot make sure, please kindly contact us.】.
Korg volca power supply compatible with: Korg KROSS-61 KROSS-88，minilogue，minilogue xd，minilogue xd module，monologue，ARP ODYSSEY，ARP ODYSSEY Module，MS-20 mini，electribe，electribe sampler，WAVEDRUM Global Edition，WAVEDRUM Mini，KR-55 Pro，KR mni，CLIPHIT，tinyPIANO，microPIANO，Pitchblack Pro，RK-100S 2.
SAFETY & RELIABILITY: All Korg volca ac power adapter undergo mulitple tests to ensure safe and available. We guarantee our this korg ka350 power adapter will charge your device as efficiently as the or....

Check Stock

HC-05 Wireless Bluetooth Receiver RF Transceiver Module Serial Port Transmitter Module

RXD: the receiver, Bluetooth module receives from another device sent data.
normally connected to other devices transmitting end TXD?.
TXD: sending end, the Bluetooth module to send data to other devices.
receiving terminal is normally connected to other devices RXD.

Check Stock

Isolation Amplifiers 4.5 - 5.5 SV 8 dB (10 pieces)

【QUALITY GUARANTEE】The Digital Audio Amplifier Power Module is made by a professional manufacturer and has undergone multiple tests. It has a very good quality guarantee and a 100% brand new high-quality brand..
【HAVE A DIGITAL CHIP】The Digital Audio Amplifier Power Module is equipped with PAM8403 digital chip, which is a small digital amplifier chip, which can highlight the advantages of digital chip and bring you a good experience..
【POWERFUL FUNCTIONS】The circuit of the Digital Audio Amplifier Power Module adopts reasonable configuration, the power filter is upgraded to 470 uf, and with 1.6 mm glass fiber board, it has excellent performance and powerful functions..
【HI-FI SOUND QUALITY】The Digital Audio Amplifier Power Module outputs 3 w + 3 w high-fidelity sound quality, which can restore the most realistic scenes and bring you a good experience. It is a rare good choice for you.
【THE ANTI-METER BODY】The Digital Audio Amplifier Power Module adopts the original anti-meter body, and the potentiometer with counterclockwise switch can directly cut off the power supply. It is safe and you can buy it with confidence..

Check Stock

JacobsParts USB C PD DC Voltage Trigger Test Module 9V 12V 20V Adjustable Power 5A 100W E-Mark Type-C

Power all kinds of electronic devices with USB-C PD chargers and power banks • Test power supply capabilities.
Performs real PD power negotiation • Supports up to 5A / 100W • Has the e-Mark chip necessary to unlock 5A output on 100W power supplies.
Trigger 5V, 9V, 12V, 15V, or 20V output (not all USB-C power supplies support all voltages) • The module just performs the PD negotiation and passes the output.
LED voltage indicators • Retains setting after power loss.
Power supply must be connected to the male end of the module.

Check Stock