ReviewsProgramming Interface

OHP New K DCAN OBD2 USB Cable for BMW E-Chassis Models 1998-2016 | Windows Only

PROFESSIONAL-GRADE OBD2 PROGRAMMING TOOL: Top-quality 1.4 meter long interface cable with FTDI 232RL / 232RLRQ chip for full diagnostic and coding..
FLIP SWITCH FOR K-LINE AND DCAN: 2-in-1 interface functionality. Switch between (left flip) older models (1998-2007) using K-Line and (right flip) the newer models (2007-2018) using the DCAN interface..
E-SERIES MODELS FROM 1998-2016: Supports 1 Series, 3 Series, 5 Series, 6 Series, 7 Series, X Series, Z series, and other E chassis models between 1998-2018..
WINDOWS ONLY: Runs on Windows XP/7/8/10. Made for INPA, EDIABAS, NCSexpert, NCS Dummy, Rheingold, SSS Progman, Tool32, WinKFP, and many other available softwares..
CD ISSUE: Kindly message us for the complementary software. We're thanking you for the initial feedback regarding this. The obd2 works perfectly, though, and isn't affected...

Check Stock

ARCELI TL866II Plus USB High Performance EEPROM Flash BIOS Programmer for ATMEL AVR ATMEGA AT90 PIC GAL SRAM CMOS

It can automatically identify the operating system to install and run under WIN2000 / WIN XP /WIN 2003/ WIN 2008/ WIN VISTA / WIN7 / WIN8 / WIN10 (32BIit/64Bit).
The programming speed is greatly improved . It is suitable for small batch production and supports 4 programmers for one computer..
A wide range of chip support, supports the chip 15000+, supports a variety of 24 25 26 27 28 29 37 39 49 50 series of serial and parallel memory chips, microcontroller 51 series, ATMEL AVR ATMEGA AT90 series, MICROCHIP PIC10 PIC12 PIC16 PIC18 series microcontroller , GAL programmable logic device programming, SRAM test,54/74 and CMOS4000 integrated circuit integrated functional test..
Support NAND Flash chip, the function is complete and comprehensive, the capacity supports to 8Gbits. 25 series Nor Flash capacity support to 512Mbits..
Pin contact check function, poor contact pin can pinpoint.
Ultra-low power consumption: the entire programmer uses ultra-low-power chips, using USB interface, the first truly all chip programming without external power integrated programmer..

Check Stock

SATA 3.0 2Port PCIe Controller Card,PCI Express to SATA III 6Gbps with Fixed Brackets,Plug and Play

This PCI-e to SATA card is suitable for any chassis, whether it is ATX, M-ATX or ITX chassis..
The interface adopts 2XSATA interface, PCI-e slot can be used regardless of PCI-E (1X 4X 8X 16X), and full-speed 6GBPS bandwidth transmission..
Plug and play, support hot swap, PCI-E card supports IDE/AHCI programming interface, main control chip is suitable for ASM1061..
The package contains expansion card X1, bezel X1, CD X1, and the system is compatible with windows(R) XP/server2003/VISTA/7/8(32/64bit)/mac/linux..
After you purchase this product, if you have any questions about the product, please feel free to contact us. We will patiently answer it. When the product has quality problems, we will also properly handle it for you..

Check Stock

Xhorse VVDI Mini OBD Tool Work with Xhorse VVDI Key Tool Max Programming Tool

【VVDI Mini OBD Tool+ VVDI Key Tool Max】VVDI Mini OBD Tool, which can be used with VVDI Key Tool Max to perform remote function like Generate transponder, Transponder Clone, Generate Remote,Remote Clone, OBD matching transponder/remote/smart card..
【MINI OBD TOOL】MINI OBD TOOL is a multi-function vehicle programming tool with vehicle diagnosis、Immo Programming、Throttle program、Tire pressure light reset、maintenance light reset and etc..
【3 Way To Connect】MINI OBD TOOL can connect with speciﬁc software or hardware by WIFI、WLAN or interface..
【Easy To Use】Small size can use with VVDI Key Tool at anywhere..
【Service】For any question,pls contact us we have engineer can assist you..

Check Stock

BRP Buds / BUDS2 MPI-3 Diagnostic Scanner All-Dealer/Dealer Technician 4TEC/ETEC+DESSPOST for SEADOO Skidoo CANAM

BRP MPI-3 Interface (main unit, is used for diagnosis of all BRP vehicles).
Diagnostic Cable (for connection of MPI-3 Interface to 4-TEC/E-TEC vehicles.
BRP 4-Tec desspost unit for programming keys.
BRP B.U.D.S. Diagnostic software ALL-DEALER license (supports BRP vehicle till 2016).
BRP B.U.D.S.2 Diagnostic software DEALER TECHNICIAN license (supports BRP vehicle from 2016 and after).

Check Stock

Kymate USB Programming Cable for Motorola Mobile Radio CM200 CM300 CM340 PM400 GM300 GM338 GM340 GM360 MCX600 CDM1250 RKN4081

Aftermarket Interface Cable. Length: 1M (3.3 feet).
USB port version programming cable High quality diameter PU cable For 32 and 64 bit operating systems, Windows 2000, Windows XP, Server 2003, Vista, Server 2008, WIN7, WIN8 ， WIN10 and Mac.
FOR:CM200, CM300, PM400,MCX760, MCX780, PRO3100, PRO5100 and PRO7100 CDM750, CDM1250, CDM1550, CDM1550.LS, CDM1550.LS+.

Check Stock

Honeywell Voyager 1202G 1D Single-Line Wireless Bluetooth Laser Barcode Scanner, Including Charge & Communications Base, Battery and USB Cable (9.8 ft./3m)

Class-Leading Presentation Scanning: Increases throughput by providing object detection and automatic in-stand detection and configuration.
Automatic Interface Configuration: Supports all popular interfaces in one device, replacing the time consuming process of scanning programming bar codes with automatic interface detection and configuration.
Excellent Poor Quality Code Reading: Increases throughput and reduces the potential for hand-keyed errors by quickly scanning a variety of 1D bar codes, including those that are damaged or smudged.
Multi-Interface: Minimizes costs by delivering support for USB, keyboard wedge, and RS232 interfaces in a single scanner.
CodeGate Technology: Enables users to ensure that the desired bar code is scanned before transmitting data, making the scanner ideal for use in menu scanning applications.

Check Stock

HOBBYWING ESC LED Program Card Box for Platinum V1/V2 FlyFun V5 XeRun EzRun QuicRun SeaKing Series Brushless Aircraft Car Boat Robot ESC

The LED program box is for programming HobbyWing brushless ESCs. Its friendly interface makes ESC programming easy and quick.
It works with Platinum V1/V2 FlyFun V5 XeRun EzRun QuicRun SeaKing series.
Card supports the following: ALL EZRUN ALL QUICRUN XERUN Series Platinum V1/V2 Helion Brand Vehicles FlyFun V5 Series(Except: V3.1, V3.1-1S, V3.1-....
Does not support: Platinum V3 Series Skywalker Series.
Note: Please carefully browse written in the product description,And Product Compatibility.You needn't re-label this program card if you ESC is a....

Check Stock

SparkFun MicroMod Artemis Processor - Modular Interface Ecosystem That Connects Artemis microcontroller/Processor Board to Various/Carrier Board peripherals

Artemis General Features: 1M Flash / 384k RAM, 48MHz / 96MHz turbo available, 6uA/MHz (operates less than 5mW at full operation), 48 GPIO - all interrupt capable, 31 PWM channels, Built in BLE radio and antenna.
Additional Artemis Features: 10 ADC channels with 14-bit precision with up to 2.67, million samples per second effective continuous, multi-slot sampling rate.
Additional Artemis Features: 2 channel differential ADC, 2 UARTs, 6 I2C buses, 6 SPI buses, 2/4/8-bit SPI bus, PDM interface, I2S Interface, Secure 'Smart Card' interface, FCC/IC/CE Certified (ID Number 2ASW8-ART3MIS).
Specific Peripherals made available on MicroMod Artemis: 1x USB dedicated for programming and debug, 1x UART with flow control, 2x I2C, 1x SPI, 1x Quad-SPI, 8x Fast GPIO, 2x Digital Pins, 2x Analog Pins, 2x PWM, 1x Differential ADC pair, Status LED, VIN Level ADC.
Additional peripherals are available but are shared on dedicated MicroMod pins. Processor board only, additional carrier board(s) will be needed to use..

Check Stock

Ultimate Swift Programming - Training DVD

ALL NEW USER INTERFACE - In 2017 a new user interface has been introduced to mastercam. This DVD will help you get started with mastercam learning all the basic features, tool manager, sheet setup and much more..
1280x720 HD QUALITY - We concentrate on bringing the highest video/audio quality to make sure you concentrate on the lessons and can easily follow along lessons.
MILL, LATHE & SOLIDS - DVD will cover one exercises of milling, lathe and solids to get you started understanding mastercam best (Pre-Requisite to 2D Mill & Lathe).
EXERCISE FILES AND HOME LEARNING EDITION - DVD includes all the Exercise Files (both solidworks and mastercam files) and drawings in pdf format. Also Included is the Home Learning Edition so you can practice from home.
15+ YEARS OF EXPERIENCE - The Instructor has over 15 Years of experience in machining and programming as well as tooling which he uses very effectively to explain why using certain tools and features is best in certain situations (Real World Training).

Check Stock

WayinTop 20x4 2004 LCD Display Module with IIC/I2C/TWI Serial Interface Adapter (Yellow Green/2004)

【20x4 LCD Display】With this shield, you can display whatever you want by programming the for Arduino board. Therefore, this is a perfect choice to make your project more interesting and vivid! Totally display 20 characters in one row, 4 rows can display 80 characters..
【IIC Interface Adapter】No need to buy the adapter extra, this kit contains a IIC/I2C/TWI Serial Interface Adapter, with witch you can start your project at any time..
【Easy to Use】 Less I/O ports are occupied, only four - VCC, GND, SDA (serial data line), SCL (serial clock line). Address of the module: 0x27.
【Support IIC Interface】It only takes two I/O port thus saving more for other usages. You can adjust the contrast by the potentiometer at its back. If you don’t want the back light, you can also unplug the jumper cap at the LCD back..
【Widely Applications】LCD display module based on the popular controller, works great with for Arduino and other micro-controllers..

Check Stock