ReviewsProp Balancer

OEMTOOLS 27306 Long-Reach Harmonic Balancer/Pulley Installer, Extra Long Forcing Screws for Hard to Reach Balancer Pulleys

MANY APPLICATIONS: The forcing fasteners in this harmonic balancer puller fit a wide variety of V8 and V6 vehicles.
M16 x 2.0 mm (GM), M14 x 1.5 mm (Dodge, Chrysler, and Jeep), M12x 1.75 mm (Dodge Chrysler, and Jeep), and M12 x 1.5 mm (Ford).
SAVE TIME AND MONEY: Car repairs can be expensive.
By using this harmonic balancer installer, you will be saving over $600.
You can also save time with this balancer installation tool by not waiting for repairs at the auto shop.
CONVENIENT PACKAGE: All of the pieces in this harmonic balancer installer kit come in one convenient package, making the pieces both easy to find and easy to store.
Never worry about losing pieces with this harmonic balancer puller set.
EASY TO USE: Assemble the threaded rod nut bearing with the bearing facing away from the hex.
Insert the threaded rod through the balancer and fastener into the crankshaft.
Use a second wrench to rotate the assembly.
EFFECTIVE: The three puller arms have a significant bite to grip and remove pressed-on harmonic balancers.

Check Stock

AUTOAND GM Harmonic Balancer Remover Puller, Automotive Replacement Engine Harmonic Balancer without Tapped Holes, Crank Pulley Puller Compatible with Ford Coyote 5.0

[QUICK & SAFE] GM harmonic balancer puller kit is intended to quickly and safely remove harmonic balancers without tapped holes. This tool features a "clip-in" design allowing removal without bolting the puller to the balancer. The harmonic balancer without threaded holes can also be easily removed..
[APPLIACABLE VEHICLE] The harmonic balancer puller tool is compatible with GM models: 5.3L, 5.7 LS1, 6.0 LS2, 6.2 LS3, 7.0 L. Compatible with Chrysler, Jeep, Dodge models: 3.5 L V6, 3.6L V6, 4.7 L V8, 5.7 L V8, 6.1 L V8..
[INAPPLICABLE VEHICLES] This tool is not applicable to 1997 or earlier GM LT (5.7L LT1003c4) series engines (with threaded holes), and does not apply to 2018+ Ford 5.0 engines and newer Coyote balancers. Also will not work with the truck pulley. (If you have any issue, please feel free to contact us by email).
[EASY TO USE] Lubricate and tighten the pressure screw, after inserting the jaws into the spokes, turn them carefully clockwise to engage the harmonic balancer. Tighten the pressure screw to reach the crankshaft, finally use a wrench or a ratchet to turn the compression screw carefully until the harmonic balancer is removed..
[HIGH QUALITY] The harmonic balancer removal tool allows you to complete the work faster and save your time, w....

Check Stock

OEMTOOLS 25090 Harmonic Balancer Puller Kit, Adjustable 3-Jaw Puller Fits Most Late Model Automobiles & Trucks, Forcing Screw Fits a 3/8” Square Drive, Includes 4 Forcing Rods, 6 Piece

FOR PRESSED-ON HARMONIC BALANCERS: Harmonic balancer tool is designed for pressed-on harmonic balancers with a single center retainer bolt.
Uses 3 jaw puller arms with significant bite to grip and remove spoke-style pressed-on harmonic balancers.
WIDE APPLICATION: Crankshaft harmonic balancer puller designed for use with Model GM 2000 Generation II Cadillac (1988 - Newer), Chevrolet Trucks (2003 - Newer), Chrysler (1990), Ford (1995 - Newer), and Mitsubishi Eclipse (1995).
EASY TO USE: Unique spring-loaded jaws hold the legs in place when positioning the harmonic balancer removal tool, making removing and reinstalling the harmonic balancer a relatively simple and inexpensive process.
INSTRUCTIONS AND STORAGE CASE INCLUDED: Our harmonic balancer pulley removal tool comes with easy-to-follow instructions and a durable blow-molded carrying case.
Easily take this harmonic balancer puller set from job to job.
PRODUCT SPECIFICATIONS: Includes Puller Body, 3-Jaw Puller, (3) Jaw Retaining Pins, (3) Wave Washers, (4) Pressure Screw Adapter Rods (4.

Check Stock

For GM LS Harmonic Balancer Puller 25264 Crank Pulley Puller Automotive Replacement Engine Quickly Removes Harmonic Balancers without Tapped Holes

【Compatibility】Compatible with GM engine models: 5.3L, 5.7 LS1, 6.0 LS2, 6.2 LS3, 7.0L , compatible with Chrysler,Dodge,Jeep engine models: 3.5 L V6, 3.6L V6, 4.7 L V8, 5.7 L V8, 6.1 L V8. Not applicable to 1997 or earlier general LT (5.7L LT1003c4) series engines (threaded holes), not applicable to 2018 and newer Coyote balancers..
【Unique Design】 The harmonic balancer puller adopts a "clamp-in" design, which can be disassembled without connecting the puller bolts to the balancer, which helps removing the balancer quickly and easily..
【Material】Constructed from high quality carbon steel material , it is solid, durable and no deformation .The surface is coated with black paint, which can resist corrosion and rust, ensures long-term service..
【Benefits】When this harmonic balancer pullers (without threaded holes) is working on the balancer, it do not require disassembly of the radiator. This is a unique design of buckle attachment that can be disassembled without fixing the tie rod to the balancer..
【Satisfaction Guarantee】If you're not 100% satisfied with this tool set , simply return it for a full refund in 30 days, guarantee with 12 months’ warranty..

Check Stock

Tallew 25264 Harmonic Balancer Puller Crank Pulley Puller Automotive Replacement Engine Quickly Removes Harmonic Balancer Puller Kit LS Balancer No Tapped Holes No Remove Radiator Compatible with GM

Novel Design: the 25264 harmonic balancer puller features a clip in design that provides a strong grip, and can be removed without bolting the puller to the balancer, helping to remove the balancer quickly and easily.
Easy to Use: crank pulley balancers can remove the balancer safely and quickly, no need for threaded holes, no need to remove the radiator, easy to operate, easy to do tough jobs, and also save your time.
Reliable Material: harmonic balancer puller is made of quality carbon steel material, the surface is sprayed with anti oxidation and anti corrosion paint, which is corrosion resistant, anti rust, sturdy and serviceable, with a certain weight and strength, does not deform, and ensures safe use.
Good Compatibility: compatible with GM engines: 5.3 L, 5.7 LS1, 6.0 LS2, 6.2 LS3 and 7.0 L, and compatible with Dodge: 3.5L V6, 3.6L V6, 4.7L V8, 5.7L V8, 6.1L V8.
Note: not for compatibility with 1997 or earlier GM LT (5.7L LT1.

Check Stock

A-Team Performance - Harmonic Balancer Install Tool Crank Pulley Installer Crankshaft Installation 551141 Billet - Compatible with GM 1997-Up LS1 LS Engines

Harmonic Balancer Install Tool Crank Pulley Installer Crankshaft Installation 551141 Billet.
Compatible with GM 1997-Up LS1 LS Engines.
Superior Quality: Made of hardened structural 10.9 steel, it is excellent solid and durable with great rust and corrosion resistance to long-lasting service your balancer..
Wide Compatibility: This LS Harmonic balancer is perfect for your Camaro, Corvette, Trans Am, GTO, G8, LS Truck, or LS powered street rod..
Installation: Simply thread the tool into the crankshaft until it seats, then tighten the nut down until the pulley is seated. This is a must have for engine swaps or upgrading the balancer..

Check Stock

ABN Long Reach Harmonic Balancer Installer Kit – 5 Piece Harmonic Balancer Pulley Puller Set Damper Puller Kit

PROTECT YOUR CRANKSHAFT FROM FAILURE: The ABN Long Reach Harmonic Balancer Installation Tool Pulley Set allows you to quickly and easily install replacement harmonic dampers into your vehicle.
A harmonic balancer protects your vehicle from damaging vibrations that can wear down the life of your crankshaft and protects your crankshaft threads from stripping, making it important to install the harmonic balancer with precision and accuracy.
FITS YOUR VEHICLE: Designed for use on many late Ford, GM, Dodge, and Chrysler vehicles with V8 and V6 engines.
Long reach thread sizes include M14x1.5, M12x1.75, M12x1.5, M16x2.0.
EASY TO USE: Attach the pressure bearing screw nut onto the chosen jack screw.
After guiding the replacement harmonic balancer onto crankshaft pin, thread the jack screw into the crankshaft and hand tighten the pressure bearing to the harmonic balancer.
Continue tightening system into place with hand wrench (not included) and remove installer assembly.
CONTENTS: Long reach harmonic puller tool includes a pressure bearing and screw nut assembly tool and 4 jack screws to fit a variety of vehicle sizes.
Constructed of heavy-duty metal materials for durability and longevity with a black oxide finish for resistance to....

Check Stock

Michigan Motorsports Harmonic Damper Balancer Crank Bolt for GM LS7 & Dry Sump LS3 Engines LS9 LT4 LT5 11570163 Install Tool LS1 LT1 Pulley Installation

Michigan Motorsports Harmonic Damper Balancer Crank Bolt for GM LS7 & Dry Sump LS3 Engines LS9 LT4 LT5 11570163.
Factory Replacement Harmonic Balancer /Dampener Bolt for GM LS7 and LS3 Engines using a dry sump oiling system. Also known as a Crank Pulley Bolt or Engine Crankshaft Pulley Bolt..
Harmonic balancer bolts are made of high-quality steel and are heat-treated for extra strength. The factory LS series engines harmonic balancer bolts are a torque to yield design. Not reusable..

Check Stock

WAVE 7 NCAA Alabama Crimson Tide Engraved Pool Cue

DURABLE & WEAR-RESISTANT?Made of high quality acrylic material, very wear-resistant and durable to use.It is with a rubber grommet protects your cue and allows for a snug, secure fit..
EASY TO CARRY & USE?Pocket size.With detachable design, lightweight and easy to carry and store..
WIDE SUITABLITY?This billiards balancer is widely suitable for nine balls, black eight, snooker,billiards etc..
GREAT PERFORMANCE?This balancer helps you improve your ball skills, reduce the redundant actions in the shot time. A great billiards training accessory for you, makes your training easier and more effective..
PERFECT TRAINING TOOL?This perfect billiard balancer designed for beginner or professional players. Ideal gift for snooker & pool billiards players..

Check Stock

Shankly Harmonic Balancer Puller, Crankshaft Pulley Removal Tool or Harmonic Pulley Puller Tool, Steering Wheel Puller Kit with Heavy-Duty Case for Pulley Puller and Installer Kit

✅ HARMONIC BALANCER PULLER SET: This pulley puller, and other tools are designed to handle a variety of jobs, giving the user multiple uses for a single toolset and allowing for the easy and simple removal of steering wheels and crankshaft pulleys.
✅ TIME SAVER: This gear puller tool or harmonic puller eliminates the need for a technician to go through the time-consuming process of first removing the radiator before being able to remove the pulley.
✅ STRONG JAW DESIGN: This harmonic balancer puller jaw design or (tools flywheel puller tool set) provides greater durability, clevis pins allow jaws to be quickly removed and installed, allowing the user to finish the job quickly and effectively.
✅ IDEAL FOR TIGHT SPACES: Shankly's pully puller tool or gear puller is designed to extract damper pulleys in tight engine compartments, the compact design provides more room to work than many harmonic balancer puller tool.
✅ HEAVY-DUTY CASE: This harmonic balancer puller/installer set or puller set sits neatly in a tidy blow molded case with a built-in handle and slide latches making it simple and easy to move and store this tool.

Check Stock

Wheel Balancer, Quick Release Hub Wing Nut Wheel Balancer Tire Change Tool (Thread Diam. 40mm, Pitch 4mm)

【Ideal Choice】Tire change nut works well with ranger, launch wheel balancer etc..
【Plastic Tire Balancer】This quick hub wing nut is made of high quality plastic material, lightweight, high temperature resistance, exquisite workmanship and ultra durable..
【Convenient to Use】The quick wing nut helps speed up the balancing process with its quick release threads. And the balancer tool allows the wingnut to slide in and out of position when the release lever is pressed, very convenient to use..
【Size for Reference】Size is 27.5 x 12 x 12cm/10.8'' x 4.7'' x 4.7'', the top head diameter: 8.5cm/3.3''. Please check whether the product is suitable for your model before buying..
【Professional Service】You can contact us if you do not know how to use. We are pleasure to provide after sales service with you..

Check Stock