ReviewsPrototype 1 30 Layer Pcb

KEYESTUDIO 10PCS Proto Shield for Arduino Mega, Double Sided PCB Prototype Shield Solderable for Arduino Mega R3 2560

  • Good Value PCB Diy Kit-contains 10 pieces prototype circuit boards and comes with a beautiful box.
  • Perfect size for arduino mega board-seamlessly plug it into the mega board with the pin headers and 4 mounting holes at the corners.
  • High Quality-solid and sturdy glass fiber FR4 material proto boards, thick and double sided.
  • Very Convenient-clear yellow pin labels and pre-tinned plated holes on board make you easily solder components and sensors for your projects without mistakes.
  • Hole-pitch: 2.54mm/ 0.1inch, Hole-diameter: 1mm/ 0.04 inch, allowing easy attachment of medium sized wire.
Check Stock

Helping Hands Soldering, Toolour Magnetic Helping Hand for Soldering, 4 PCB Circuit Board Holder and Flexible Helping Arms, Third Hand Tool with Heavy Duty Base for Electronic Repair Hobby Craft

  • ...action to the steel base. We included two 9.8″ arms, two 5.9″ arms helping hand arms, completely free your hands up and work easier than ever before. The 360° rotating alligator clip allows you to be more flexible in welding work..
  • Magnetic PCB Holder Pillars: 4 small pillars can hold a PCB board by their multi-layer or tips through the location hole component point. Full metal body is anti-rust and corrosion-resistant, powder-coated promises a longer usage. To make sure the PCB you worked on can be positioning steadily, the pillars’ tips are better to hold boards by 4 location holes..
  • Stainless Steel Base: 9″ x 5. 9″ heavy duty base with industrial-grade weighted construction, never tip over, powder-coated iron base. 4 pcs rubber feet prevent the stable soldering station from sliding around on your workbench, even protect the work surface against scratches and scuffs. NOTE: Due to different manufacturers’ production batches, the iron plate may also be updated at any time(eg with holes or engraved LOGO). Under normal circumstances, it will not affect your normal use..
  • Widely Used & Service: Helping hands soldering for any electronic, welding, crafting, painting, figurine and hobby work, or any precision project that requires extreme accurac....
Check Stock

BASIKER BS6 Boat RGB LED Light 2x2000LM 36LED w/ Remote Control 12V~24V Underwater Marine Color Light Kit IP68 Surface Mount Designed for Cruise Ships Yachts Boats Sailboat Pontoon Transom

  • INJECT SOUL INTO YOUR BOAT ➤2000LM 10-24V, Marine RGB Boat Lights kit, 5050 Chip. Selected lamp beads, IC, PCB board, higher efficiency and longer....
  • UPGRADED IP68+ WATERPROOF ➤ 30M water depth aging without any leakage. The latest triple waterproof design: PCB waterproof coating, high temperature....
  • BEST MARINE MATERIALS ➤ 316 stainless steel, which is ten times more expensive than 304, is specially designed for highly corrosive salt water. Cool....
  • SUPER EASY INSTALLATION ➤ Two wires and a few screws are suitable for any scene with the surface mounting method. Adding a layer of waterproof glue....
  • KEEP YOUR MONEY SAFE ➤ Any leaks or burns are guaranteed for life. Full refund for quality problems within 1 month, free replacement for quality....
Check Stock

CZH-Labs DIN Rail Mount 12V Passive 2 SPST-NO 30Amp Power Relay Module.

  • DIN Rail Mount Passive 2 Channel SPST-NO 30 Amp Power Relay Module..
  • High quality DIN rail mount carrier, can support width 35mm /32mm / 15mm rail..
Check Stock

EarMen Eagle High-Performance Portable USB DAC and Headphone Amp - PCM DxD and DSD

  • EarMen Eagle is a high-performance pocket-friendly USB DAC and Headphone Amp. It plays all 32bit/384kHz formats including PCM, DXD and DSD, and is....
  • Featuring Audiophile SABRE DAC - Powered by ESS ES9281, which provides high-end audio performance with distortion plus noise (THD+N) less than 0.002%,....
  • Low-Noise Design - EarMen Eagle uses Super LOW ESR tantalum capacitors, high grade components in the power-supply, and 4 layer gold plated PCB....
  • Gold plated PCB - EarMen Eagle’s PCB is 4 layer gold-plated and manufactured in-house using CNC drilling and pattern plating techniques. This....
  • Design - After many years of experience in the audio industry, our engineers have used their knowledge to develop a device that will provide you with....
Check Stock

Yahboom Breadboard Dupont Wire Multicolored Jumper Wires 40pin M-F, 40pin M-M, 40pin F-F, 3PCS 830 Point Solderless Prototype PCB Board for Arduino Raspberry Pi Electronic Project

  • 【Pure Copper Breadboard Jumper Wires】40 colored 1 row, 40 composed of 10 colors, can be disassembled for use, PVC material, high temperature resistant wire, more safe and durable.The two ends of the wire are designed with quick wiring ports, which can be used for circuit quickly without soldering..
  • 【120pcs 3 Types M-F M-M F-F】Separable multicolored (10 colors) softness ribbon cables, Each cable length: about 20cm /8-inch.
  • 【3PCS Spliceable Breadboards Kit 830 Point】165×55×10mm,630+200=830 holes，1 terminal strip: 630 jacks，2 distribution strips: 200 jacks，Matching jumper, wire diameter 0.8mm.
  • 【MB-102 ABS Recyclable Experimental Connection Board】White ABS Plastic Body with Black Printed Legend. Color Legend on Distribution Strips.With Self-Adhesive Tape on the Back, Easy to Stick on the Arduino Prototype Shield..
  • 【Application】Good for A-rduino Breadboard Jumper Wires kit Project and other Electrical DIY kits.DIY experiment / Electronic projects / Breadboard / PC motherboard / PCB project.
Check Stock

CoolerMaster MASTERACCESSORY Riser Cable PCIe 4.0 x16 - 300mm, PCIe 4.0 Compatible, EMI Shielded 30 AWG, Protective ABS Casing for Graphics Card

  • PCIe 4.0 Compatible: While providing twice the bandwidth of PCIe 3.0, the Gen 4.0 riser cable remains backwards compatible with a maximum transfer rate of over 64Gb/s (bi-directional) and fully supports the 16GT/s bit rate of PCIe 4.0 devices..
  • Ultra Durable PCB: The multi-layer coated PCB provides best-in-class performance under high thermal loads, cable flex, and moisture resistance..
  • Heavy Duty Shielding: EMI shielded 30 AWG tinned copper wires ensure minimal signal delay and electromagnetic interference-free operation..
  • Gold-Plated Pin Connections: Gold-plated PCI pins allow maximum durability with a rated 400g of retention force per contact pair..
  • Protective ABS Casing: UV resistant ABS casing protects cable connection points from rough handling..
Check Stock

Aoicrie MKS Gen L V1.0 3D Printer Integrated Mainboard Controller PCB Board Compatible Ramps1.4/Mega2560 R3 with A4988 Motor Driver for 3D

  • Integrate 2560 and Ramps1.4 one PCB,which designed to avoid complicated connections, easier wiring and more stable Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Run Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly..
  • Use high quality MOSFET tube,better cooling and more stable.Use special power chip,support 12-24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently and power shortage..
  • Support a variety of stepper drivers: A4988,DRV8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers, A4988 driver board widely used in 3D printers and small CNC machines..
  • Support functions: Non-trace resumption after power off, run out filament ,and auto shut down, XTZ axis with different color terminal controls the motors and end stop,which is convenient to wire.Use high-quality 4 layer PCB&Use special power chip.Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces..
  • Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.Adjustable current control lets you set the maximum current ....
Check Stock

YIMAGUJRX RUNJRX Keyboard Switch Pads Poron Foam for 61/64/87/100/104/108 Hot Swap Keyboard 120Pcs

  • 【FUNCTION】It is a new project to update the keyboard by filling the gap between the switch and the pcb, reducing vibrations and typing sounds..
  • 【CHARACTERISTICS】We customize the bottom of the material has a layer of film plus non-stick adhesive backing will be more resistant to tearing, support repeatedly tear off and then stick on..
  • 【SET MATCHING】You can place the Keyboard switch pads directly on the PCB with tweezers without disassembling the keyboard..
  • 【MATERIAL】Made of 0.5mm thick Poron high-density memory foam..
  • 【PACKAGE INCLUDES】Keyboard switch pads*120 x 1 , Tweezers x 1..
Check Stock

iFlight SucceX 50A 2-6s ESC 32bit BLHeli 32 4-in-1 ESC with Telemetry Pad Built in Current Sensor DSHOT600 for FPV Racing Drone Quadcopter

  • ● SucceX 50A 32bit BL Dshot1200 4in1 ESC was designed to give your motors smooth power with great stability and durability.
  • ● The STM32F051 is combined with high-performance 3-in-1 driver, Outbreak faster speed.
  • with 6-layer PCB board, 4oz 1.6mm thick power board(0.9mm copper ratio),better operating load capacity.
  • ● TDK MLCC Low ESR ceramic capacitors and NTMFS5C430NL MOSFET that provides high efficiency and better heat dissipation.
  • ● Standard 30.5*30.5 Φ3mm mounting holes.
  • Vibration and shocks can be perfectly avoided by adding dampers.
  • Rational layout design with extended solder pads ensures easy builds, fixes or adjustments.
  • ● 6s ESC support Dshot Up to 1200, support: Dshot150/300/600/1200, MultiShot, OneShot.
Check Stock

QEBIDUM Mini Breadboard Solderable Protoboard for DIY Electronic, PCB Prototype Board Suit for Arduino Projects, Double Sided Perma-Proto Boards Gold-Plated Pad Easy to Solder (6 Blue Pack)

  • BOJACK high quality 6 Vaules 40 Pcs Double Sided PCB Board Prototype Kit.
  • The product contains six different sizes of circuit boards of circuit boards2*8CM,3*7CM,4*6CM,5*7CM,6*8CM,7*9CM.different size boards to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects.
  • 4 mounting holes at the corners of the board are very convenient for installing them together..
  • Using high-quality and durable glass fiber FR-4, high-quality and firm..
  • Widely used in electronic experiments and point-to-point DIY IoT projects..
Check Stock