ReviewsPrototyping Boards Accessories

20 PCS Alligator Clips Electrical, 5-Color 21.5inch Test Leads with Alligator Clips, Stamping Jumper Wires for Electrical Testing, Circuit Connection, Experiment

  • PACKAGE INCLUDES: 20 Pcs test leads with alligator clips. Five colors, four of each color. 5 color test leads are convenient to keep track of the situation, help you distinguish one from another visual..
  • SAFETY & DURABILITY: The jumper wire is made of PVC material, safe and reliable, strong elastic force. Test lead surface plating, glossy. Does not cause wire crossing or a short circuit..
  • NON-SLIP & FORCEFUL: Alligator clips electrical are made of nickel-plated steel with a strong spring and a strong connection to ensure good conduction..
  • WIDELY USED: Widely used in laboratory, electrical testing, such as experiments, circuit boards, prototyping, troubleshooting, etc. It can be used in laboratories, shops, schools, homes and industries..
  • WHAT YOU GET: 20 PCS alligator clips electrical, our 7*24 friendly customer service for peace of mind..
Check Stock

EPLZON Gold Plated PCB Solder-able Breadboard for DIY Electronics Projects Compatible with DIY Arduino Soldering Projects 2.05"x3.5" (5 Pack + 2 Mini Board, Black)

  • ✅This board is especially useful for preserving a prototype or experiment you just created on a solder-less breadboard by soldering all the pieces in place..
  • ✅Suitable for a variety of MCU boards, compatible with Arduino Nano, ESP8266, NodeMCU, etc.
  • suitable for various DIP type components.
  • suitable for any type of Raspberry Pi GPIO breadboard PCB..
  • ✅Gold plated finish to prevent oxidation, high quality gold finish for easy soldering,and all holes are through-plated for mounting strength.
  • ✅5pcs 2.05"x3.5" PCB Solder-able Breadboard + 2pcs 2.0"x1.5" mini PCB Solder-able Breadboard for prototyping and transferring,Black.
  • ✅Lead-free and RoHS compliant for longer shelf life.
Check Stock

Chanzon 6 pcs Mini Breadboard with 170 Tie Points SYB-170 Solderless Prototype Kit 6 Different Color PCB Bread Board Plus Adhesive Back for Small DIY Kits Arduino Raspberry rasp Pi Proto Project

  • Solderless SS breadboards, 6 in One Pack, with Tight Metal Spring under Tie Point for Good Connections, Springs Aligning Perfectly with Points Makes....
  • Mutiple board can be connected together for expansions, Self-adhesive tape on the back of the bread board(single sided Prototyping Circuit boards)..
  • Type: SYB170 | Hole-diameter: 1 mm / 0.04 inches | Hole-pitch: 2.54 mm / 0.1 inches | Thickness: 10mm | Kits : 6pcs 6 different colors (black white....
  • WARRANTY AND CUSTOMER SERVICE - We provide 1 year warranty for this pcs board, Our Electronic Customer service team is ready for income request 24x7.....
Check Stock

SparkFun RedBoard Qwiic ATMega328P compatible with Arduino board w/ Qwiic Connector and CH340C Serial-USB Converter IC Breadboardable R3 footprint microcontroller Improved reset button

  • ATmega328 microcontroller with Optiboot (UNO) Bootloader. Rev3 shield compatible..
  • Program with a USB Micro-B cable using the Arduino IDE platform: Plug in the board, select “Arduino UNO” and you’re ready to upload code.
  • Hardware peripherals you know and love: 20 Digital I/O pins with 6 PWM pins, 6 Analog Inputs, UART, SPI and external interrupts.
  • Broken out the SDA, SCL and IOREF pins, so it will be compatible with future shields Power over USB or through the barrel jack 7 to 15VDC.
  • The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong..
Check Stock

SYMPL Premium Surfboard Traction Pad, 3 Piece Deck Pad Full Size Coverage for Surfing, Skimboarding, with Maximum Grip Using 3M Adhesive, Degreed Arch Support, Fits Fish, Square, Swallow, Round Tail

  • ...board and long boards. Sympl Grip is better then surf wax and doesn't make a mess like surfboard wax does. Great for long boards, wakesurf board and skim board traction..
  • ULTIMATE DECK GRIP: Our custom made diamond grooves and corduroy grooves come on ultra-light EVA foam with 3m Adhesive. We provide Premium surfing accessories for surfers and all board riders..
  • STYLE: Minimalist modern Color options for everyone. We make front traction pad surf grip and 2pc. fish grips. Great for long boards, wakesurf board and skim board traction. Sympl traction is for all boards..
  • PROFESSIONAL: Shred options for everyone. Sympl makes premium quality surf and water sport accessories. Great for long boards, wake surf board and skim board traction. Sympl traction is for all boards. We make front traction pad surf grip and 3pc. fish grips. Slash traction pads work great on all boards. If you are not completely satisfied for ANY reason, simply return it within 30 days for a full refund, no questions asked!.
Check Stock

3Pcs ESP8266 ESP-12E,Aideepen NodeMCU ESP8266 30PIN ESP-12E Development Board Wi Fi WLAN WL Module CP2102 for NodeMCU for ESP-12E for Arduin0

  • 【ESP8266】This is ESP8266 V2 Nodemcu Lua development board,works great with the latest Compatible with Arduin IDE/Mongoose IoT/Micropython..
  • 【30PIN】ESP8266 CP2102 chip.it's easy to program,without having to press the flash and reset buttons before each flash operation..
  • 【NodeMcu】NodeMcu is an open source Lua based firmware for the ESP8266, ultra low cost wireless modules, development boards for rapid prototyping, integrated with ESP8266 chips..
  • 【Easy】The ESP8266 has powerful on-board processing and storage capabilities.and has integrating GPIO, PWM, IIC, 1-Wire and ADC all in one board very easy to use..
  • 【Why choose us】You can use it with our development board ASIN B0B85C98FX,to make your project more convenient and efficient.Aideepen specializes in various electronic components,please feel free to contact us..
Check Stock

GenBasic 40 Piece Male to Female 4 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping

  • Male to Female AWG 26 Solderless Ribbon Jumper Wires for Breadboard Prototyping.
  • 40 x 10cm (4 Inches) Parallel Adjoined Wires.
  • Color Coded with 10 Colors and 4 Wires of the Same Color in Each Length.
  • Insulated Wire Casing with 2.54 mm Pitch DuPont-Compatible Connectors.
  • For Use in Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, LoveRPi Kits, and more.
Check Stock

GenBasic 80 Piece Male to Female 4 and 8 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping

  • Male to Female AWG 26 Solderless Ribbon Jumper Wires for Breadboard Prototyping.
  • 40 x 10cm (4 Inches) and 40 x 20cm (8 Inches) for 80 Total Wires.
  • Color Coded with 10 Colors and 4 Wires of the Same Color in Each Length.
  • Insulated Wire Casing with 2.54 mm Pitch DuPont-Compatible Connectors.
  • For Use in Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, LoveRPi Kits, and more.
Check Stock

ForPro Professional Collection Sanding Sponge Board, Orange 100/Blue 180 Grit, Double-Sided Manicure & Pedicure Nail Buffer, 7” L X 1.15” W, 12-Count

  • Sponge Nail Boards: ForPro Sponge Boards are made from the finest sanding foam. These double-sided reusable nail boards are a necessary addition to your manicure accessories.
  • Double-Sided Nail Boards: The nail boards feature grits on either side, giving you a choice of Orange 100 grit nail board and Blue 180 grit nail board.
  • Nail Care: These reusable sponge boards are specially designed for your convenience, hygiene, and quality. The sponge boards are perfect for removing excess product leftover from your gel and acrylic nails.
  • Washable Nail Boards: These washable and sanitizable sponge boards feature ultimate flex for reaching all areas of acrylic as well as natural nails.
  • Size and Other Details: The sponge boards measure 7” L x 1.15” W. Each package contains 12 washable nail boards.
Check Stock

Puerto Rico Flag Corn Hole Boards - Regulation Size 2x4 - Includes Boards and 8 Corn Filled Bags

  • ...cing. Our Premium boards are built using Solid Wood Frames and Premium Baltic Birch 1/2" Plywood Tops. Boards also include Support Brace to prevent bouncing and Crossbar Leg Support for added Stability. These boards are ready for Tournament Play right out of the box!.
  • ACCESSORIES: Easily add accessories like a Carrying Case, Hole Lights, Edge Lights, or all three. Both Hole and Edge Lights feature 16 different colors that can be easily set and changed with the included remote. Spice up your cornhole set with our great accessory add-ons!.
  • PORTABILITY: Each set has folding legs secured with galvanized bolts. This makes them durable and incredibly easy to set-up and take down. Perfect for the next tailgate or backyard party..
  • WARRANTY: We are a US based company that stands by our products. Satisfaction is always 100% guaranteed or your money back. Contact us with any questions or concerns so we can address them immediately..
Check Stock

Bosch Benchtop Router Table RA1181

  • Benchtop router table design – Features a large aluminum top for extended work area, durability and precision.
  • Rigid aluminum mounting plate – Pre-drilled for compatibility with a variety of routers and for above-table height adjustment.
  • Extra tall aluminum fence – Has adjustable faceplates and feather boards to maximize precision and versatility.
  • Dedicated standard dust-collection port – Fits standard 2-1/2 inch vacuum hoses for debris-free operation to help keep your work area clean.
  • Easy-to-use adjustable feather boards – Attach to fence and table, providing additional guidance and kickback protection.
  • Accessory slot – Accepts feather boards and 3/4 inch optional accessories such as a miter gauge.
  • Storage pocket – Allows storage of router accessories.
  • Cord-wrap storage – Stores 6 foot power cord.
Check Stock