ReviewsProxxon Micro Lathes

Mini Vertical Slide (90 x 50 mm) for instant Milling Operation on Lathe Machine

TOOL POST MINI VERTICAL SLIDE -EASY & QUICK CLAMPING.
Quality Lathe Milling Vertical Slide Bed Size 90 mm Length x 50 mm Width Small Vertical Mi.
Small Vertical Milling Slide for Bench Small Lathes Can be fitted to Emco, Myford, Warco, Sieg C3 Small Lathes with little modification/ machining.

EXTRA SANDING PAPER: Use the DCT 320 Grit Hook and Loop Sandpaper as micro mesh sanding sheets for removing dust spots or marks between finish coats.
FINISH YOUR PROJECT: Flexible for rounded shapes of spindles, vases, and bowls.
Ideal for glass sculptures, fine metal jewelry, sanding on lathes, or....
SAVE TIME: Cut into convenient 1-inch (2.5cm) wide strip on a continuous roll.
Mesh is marked with grit for easy identification.
RESTOCK LESS: Mesh sandpaper roll is 20-feet (6m) long so you restock less and roll smoothly when you need it.
PACKAGE CONTENTS: Mesh sanding pack contains (1) roll of mesh 320 grit sandpaper to best suit your needs.
Compatible to be used as a refill roll for....

Small Body 23 mm Diameter Triple Bearing Live Revolving Center..
Tool Steel Housing and hardened point. Run out within 0.001" Suited for small woodworking lathes.
Compatible with lathes having Morse taper 1..

For clean and safe chop and miter cuts in non-ferrous metals, plastics and wood.
Ideal for miter cuts, instead of swivelling the saw head, the table with clamped down work piece is turned.
Continually adjustable round table made of pressure-cast aluminum swivels 45 degrees in both directions with positive stops at 15 degrees intervals.
Integrated tightening mechanism with self-centering clamps, V-groove for round pieces, front side groove for clamping thin work pieces.
Scope of delivery: 1x PROXXON Chop and Miter Saw KGS 80 including carbide tipped saw blade. Part number: 37160.

Application External Grooving Parting off, fit for all CNC lathes and manual lathes, good at grooves, parting off..
Easy removal of grooving inserts with user..
Boring bar with high speed steel shank, strong shock resistance, thermal cracking and resistance to deformation.

Material: The lathe milling hand wheel of the lathe is made of high-quality bakelite, with strong insulation and durability.
Easy to install: The hand wheel has a detachable rotating handle, and the hand wheel has screw holes for easy handle installation.
Application: Revolving handle hand wheels are widely used in industrial machine tools, such as milling machines, lathes, grinders, etc.
Features: New type, convenient movement of the milling handle hand wheel, strong carrying capacity.
Unique design: This plastic lathe hand wheel is a rear corrugated hand wheel design, which is convenient to replace one of the broken lathes.

✔️【WOOD BRAD POIINT DRILL SIZE】: 1/8" -5/32"-3/16"-1/4"-5/16"-3/8"-7/16"-1/2".
✔️【BRAD POINT TIP】: Special brad-point tip bites into to wood, prevents drill bit from skipping or walking without centering punch. Great for use with oak, maple, cherry and other tough woods.
✔️【MATERIAL】: Made of chrome vanadium steel hardened and tempered for longer useful life, Use in Hand Drills Eletric Drills Drill Press and lathes..
✔️【APPLICATION】: Designed to work for all wood projects especially suited for furniture making cabinetry and doweling where an exact hole is required.
✔️【USED WITH】: Use in hand drills electric drills drill presses and lathes.

Rockwell/Delta 11"/14" Wood Lathe, Spindle Bearings, Set of 2.
These are for later model 46-111 lathes. They will not fit early model 14-111 lathes that used non-extended race bearings. It is recommend you measure your bearings prior to ordering.
Bearings have a 52mm OD, 25mm ID and are 15mm wide..
Replaces Rockwell/Delta Part Numbers: Delta part number: SP-5360 or 920-04-020-5360 or ND7705.

✔️【WOOD BRAD POIINT DRILL SIZE】: 3/16" (Diameter) x 2"(Flute Length) x 3-11/32"(Overall Length).
✔️【BRAD POINT TIP】: Special brad-point tip bites into to wood, prevents drill bit from skipping or walking without centering punch. Great for use with oak, maple, cherry and other tough woods.
✔️【MATERIAL】: Made of chrome vanadium steel hardened and tempered for longer useful life, Use in Hand Drills Eletric Drills Drill Press and lathes..
✔️【APPLICATION】: Designed to work for all wood projects especially suited for furniture making cabinetry and doweling where an exact hole is required.
✔️【USED WITH】: Use in hand drills electric drills drill presses and lathes.

✔️WOOD BRAD POIINT DRILL SIZE: 3/8" (Diameter) x 3-9/16"(Flute Length) x 5-1/4"(Overall Length).
✔️BRAD POINT TIP: Special brad-point tip bites into to wood, prevents drill bit from skipping or walking without centering punch. Great for use....
✔️MATERIAL: Made of chrome vanadium steel hardened and tempered for longer useful life, Use in Hand Drills Eletric Drills Drill Press and lathes..
✔️APPLICATION: Designed to work for all wood projects especially suited for furniture making cabinetry and doweling where an exact hole is....
✔️USED WITH: Use in hand drills electric drills drill presses and lathes.

Small Vertical Milling Slide for Bench Small Lathes Suitable for Bench Lathes upto 150 mm Swing.
Base Dimension :50 x 55 mm * Sliding Table :90 x 50 mm * Vertical Travel 40 mm.
Tee- Slot width 9.5 mm Maximum *Jaw Opening : 70 mm * Adjustable Vice Jaws & Brass Gib.
Supplied with a Z type Angle Plate. Precision ground from all sides/ faces for perpendicularity/ squareness..
One base side of the Caste iron has 2 x Counter drills with suitable stud bolts to clamp the slide and the other has a continuous slot to fasten it through the lathe's toolpost stud. Check all pictures carefully.