ReviewsPsi Gauge

Kozyvacu Mini Split/HVAC/AUTO AC Repair Complete Tool Kit with 1-Stage 4.5 CFM Vacuum Pump, Manifold Gauge Set, Hoses and its Acccessories …

A Complete refrigerant changing tool kit for R410a, R134a, R134, R134A, R12, R22, R22A, R404A, R407C or R502. Especially designed for Mini-Split and HVAC system..
[Gauge] Blue gauge (low): 2-1/2" diameter, 0-500 PSI.
Red gauge (high): 2-1/2" diameter, 0-800 PSI. Max working pressure: 800PSI, Burst pressure: 4000PSI..
[Three Colored Hoses] Brass 'Quick Seal' fittings - 45 degree on one end, straight on the other - providing a leak-free seal. Sets of 6 inches long, 1/4 inch yellow, blue, and red hoses.
[Vacuum Pump] High performance vacuum pump with high torque design for easy startup and efficient operation and a Die-Cast Aluminum Housing. Cast aluminum housings make the pumps lightweight, yet durable. Easy to start and maintenance free, the thermally protected motor is durable for long time duty. While a AC system requires 500micron ultimate vacuum, Kozyvacu TA450 delivers better than 150 micron to ensure the vacuum meets your requirements..
[Complete Set] Full complete set for Mini-split/ HVAC and AUTO AC refrigerant recharging, includes 1) A pressure gauge set 2) Three colored hoses, with length of 4 ft, Red:1/4''-1/4'' 3) Two ¼ to 5/15 converters 4) 1x Can tap, 5) ¼ Flare male to ½ ACME female con....

1/2" NPT Air Regulator w/Gauge - Precise Pressure Regulation.
Piston Type Pressure Regulating Screw - More Durable and Longer Life, Prevent Air Leakage..
Two-Way Installation: Air can be Input from the Left or Right, the Position of the Pressure Gauge and the Bracket can be Exchanged..
Operating Pressure: 0-10 Bar (0-145 psi).
Flow Rate: 97 SCFM @ 90 psi (2750 L /Minute @ 6 Bar).
Temperature Range: 41-140°F（5-60℃)..
Includes 0-150 psi Gauge & Metal Bracket, a pair of 1/2" NPT Brass Air Coupler＆ Plug Kit, 2 x 1/2" NPT Fittings, 1 x Thread Seal Tape..

FRL Air Regulators: Prevent overdriving tools and have adjustable pressure..
Durable cast aluminum body to resist corrosion. INCLUDES mounting bracket..
Dial gauge pressure range: (0 to 160 PSI, 0 to 1.1 MPa). Locking adjustable knob to set/maintain consistent pressure. Ranges: 5-125 PSI..
1/4" inch national pipe threads on both inlet/outlet. Gauge thread (gauge included): 1/4" center mount..
Max Air Flow: 212 CFM. Max operating pressure: 145 PSI. Temperature range between 25°F and 140°F or -5°C and 60°C..

Made of water-safe materials, mostly lead-free brass, this RV water pressure regulator attaches to the main water line and lets the water run through it at a controlled rate, which changes the water pressure. You can set this water pressure to whichever PSI you would like by using a flat screwdriver to turn the valve..
This water pressure regulator works in temperatures up to 60°C and, because of the sturdy construction, is durable and meant to last..
This RV water pressure regulator comes with a PSI gauge that measures from 0-160 PSI. The thread on the gauge is ½” and the numbers on the gauge are easy to read, with marks every 2 PSI as well as the main marks every 20 PSI..

3/8" NPT Air Regulator w/Gauge, Precisely adjust the air pressure and keep it constant.
Flow Rate: 88 SCFM (2500 L /Minute)@ 90 PSI.
Locking Regulator Knob, 0-150 psi Gauge, Metal Bracket, a pair of Air Coupler＆ Plug Kit, 2 x3/8" NPT Fittings, 1 x Thread Seal Tape.

FRL Air Regulators: Prevent overdriving tools and have adjustable pressure..
Durable cast aluminum body to resist corrosion. INCLUDES mounting bracket..
Dial gauge pressure range: (0 to 160 PSI, 0 to 1.1 MPa). Locking adjustable knob to set/maintain consistent pressure. Ranges: 5-125 PSI..
1/8" inch national pipe threads on both inlet/outlet. Gauge thread (gauge included): 1/8" center mount..
Max Air Flow: 20 CFM. Max operating pressure: 145 PSI. Temperature range between 25°F and 140°F or -5°C and 60°C..

Low pressure gauge (the top gauge) indicates output pressure to the keg.
The low pressure regulator allows for an adjusted pressure from 1 to 50psi, the maximum downstream delivery pressure will not exceed 50psi.
High pressure gauge (the side gauge) indicates CO2 tank pressure remaining.
Duck bill check valve helps prevent product back up into the regulator.

【Connection】CGA-580 Inlet Connection fits standard Nitrogen, Argon, Helium, and Inert Gas Tanks from any supplier.1/4" Male Flare Outlet Connection fits HVAC Charging Hoses for Purging ,Pressure Testing and High-pressure lines..
【Accurate Pressure Gauge】The Nitrogen Gas Regulator has two Easy to read pressure gauge,covered with scratch-resistant plastic protective film and rubber cover.Input: 0-4000PSI.Output: adjustable 0-600PSI.The display show 800PSI that you can rate them at 600PSI, but they are able to go up to 800PSI..
【Durable Construction】Our Nitrogen Regulator is made of solid brass,so the surface can keep good looking in a long time. Precision thread design ensures high sealing performance and avoids gas leakage. You can adjust the nitrogen regulator smoothly and accurately through the T-handle to prevent galling..
【Application】The Nitrogen regulator is a standard pressure control valve that reduces the input pressure from a liquid or gas stored in a tank.It is great for HVAC purging,pressure tests,inertization,leakage tests,and Soldering,like the accurate reading of Nitrogen Regulator would help you to adjust pressure before HVAC puring..
【Filter Structure】A filter structure is used at the connection, which can effectively ....

...iameter x Height x Depth (approx.): 76 x 120 x 55 mm (LEO Record) | Protection Class: IP65.
Supply scope: 1 unit Of Keller LEO Record Manometer, Protective rubber covering and Instruction Manual| Applications: Hazardous Area Installations..
Digital manometer | Digital manometer with record function | digital pressure gauge | digital pressure manometer | battery powered manometer | digital pressure gauge with record function.

FRL Air Regulators: Prevent overdriving tools and have adjustable pressure..
Durable cast aluminum body to resist corrosion. INCLUDES mounting bracket..
Dial gauge pressure range: (0 to 160 PSI, 0 to 1.1 MPa). Locking adjustable knob to set/maintain consistent pressure. Ranges: 5-125 PSI..
3/4" inch national pipe threads on both inlet/outlet. Gauge thread (gauge included): 1/4" center mount..
Max Air Flow: 280 CFM. Max operating pressure: 145 PSI. Temperature range between 25°F and 140°F or -5°C and 60°C..