ReviewsPsu For Mining

8 GPU Mining Rig 70mm Slots with 2500W Power Supply 8 Fans Crypto Coin Miner Case with Barebone Motherboard for Ethereum Cryptocurrency Mining Frame with SSD/RAM Without GPU

【Built in 2500W Power Supply】 Built in 2500W power supply with 10 PCS long power cables. No need to purchase adapter cables, connect to....
【8 GPUs Support】8 GPU 70mm expansion slots in the mining computer case. For our power supply, the power efficiency is 90%, the rated power is....
【8 Fans Support & Fan Controller 】The cryptocurrency mining rig case is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans....
【 HDMI & VGA Ports】There are HDMI port and VGA port, you can use HDMI cable or VGA cable. It is designed for cryptocurrency mining—Litecoin,....
【Mining rig package】 Note: Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU/PSU from overheating.....

Check Stock

Traovien SATA Cables, Dual PSU Power Supply 24-Pin Adapter Cable for ATX Motherboard 18AWG - 1FT

Allowing you to connect an additional PSU to your ATX motherboard.
Both PSU will be powered up by one single motherboard.Use a second PSU to power multiple graphics cards.
Compatible with 24 pin and 20+4 pin ATX motherboards (1x 24 pin(20+4) male port and 2x 24 pin female ports).
Designed for intense Gamining and BitCoin Mining.
Material: 18AWG . Length: main cable 12inches + secondary cable 12inches (30cm+30cm).
Dual PSU Power Supply 24-Pin Adapter Cable for ATX Motherboard sata cable 24 pin to 2420+4) pin sata cable JBingGG Dual PSU Power Supply 24 Pin (20+4) Adapter Cable for ATX Motherboard 12-inch ( 30cm ) (24 pin to 24(20+4) pin).
Note: Be sure to recognize the direction when inserting the cable!!! Dont insert the cable backwards or insert the wrong position to prevent the device from being burned!! When inserting the cable, hold the socket of the device before inserting the cable to avoid excessive force to insert the socket pin..
How to use: Plug the 24PIN of the main power supply into the female plug and plug the other end to the motherboard, and plug the secondary power supply into another 24PIN female plug to switch the power at the same time..

Check Stock

FebSmart PCIE Riser for Ethereum Mining Rigs, GPU Risers for ETH Mining Rigs, PCIE Extension Cable, GPU Extension Cable, PCIE X1 to PCIE X16 Riser, VER006C GPU Riser, VER006C PCIE Riser (Blue-2PCS)

1. This FebSmart VER006C is a PCIE X1 to PCIE X16 riser. The PCIE riser will extend motherboard PCIE X1 slot out and covert PCIE X1 slot to PCIE X16 slot. The extended PCIE X16 slot will provide safe and reliable connection with GPUs. Light up more GPUs in Ethereum Mining rigs or other GPU Mining Rigs for currency mining..
2. This PCIE riser will extend the motherboard PCIE X1 slot out and covert the PCIE X1 slot to PCIE X16 slot, users will have more room to place more PCIE X16 GPUs and cool down GPUs tamperature. Added fixed buckle on the extended PCIE X16 slot, will ensure GPUs always online, always works in high performance..
3. Designed with 3X solid capacitors, 1X voltage transformer and 1X inductance on PCIE Riser, will make sure PCIE data signal get stable and reliable power supply. Built in electric safty fuse, will keep PCIE data signal away from overvoltage, overcurrent. Communicate with Ethereum mining pool instantly, Ensure Ethereum Miner Rigs get more Ethereum Hash Rate..
4. Packed with 23.6-inch USB 3.0 extension cable, will make sure GPUs flexible connection, easy to place GPUs in more room. Comes with 7.9-inch 15Pin SATA to 6Pin molex power cable, allow users easy pick-up basic PCIE data signal power supply from GPU Miner Rigs PSU..

Check Stock

FebSmart GPU Riser for Ethereum Mining Rigs, PCIE Risers for ETH Mining Rigs, GPU Extension Cable, PCIE Extension Cable, PCIE X1 to PCIE X16 Riser, VER006C PCIE Riser, VER006C GPU Riser (Black-6PCS)

1. This FebSmart VER006C is a PCIE X1 to PCIE X16 GPU riser. The GPU riser will extend motherboard PCIE X1 slot out and covert PCIE X1 slot to PCIE X16 slot. The extended PCIE X16 slot will provide safe and reliable connection with GPUs. Light up more GPUs in Ethereum Mining rigs or other GPU Mining Rigs for currency mining..
2. This GPU riser will extend the motherboard PCIE X1 slot out and covert the PCIE X1 slot to PCIE X16 slot, users will have more room to place more PCIE X16 GPUs and cool down GPUs tamperature. Added fixed buckle on the extended PCIE X16 slot, will ensure GPUs always online, always works in high performance..
3. Designed with 3X solid capacitors, 1X voltage transformer and 1X inductance on GPU Riser, will make sure PCIE data signal get stable and reliable power supply. Built in electric safty fuse, will keep PCIE data signal away from overvoltage, overcurrent. Communicate with Ethereum mining pool instantly, Ensure Ethereum Miner Rigs get more Ethereum Hash Rate..
4. Packed with 23.6-inch USB 3.0 extension cable, will make sure GPUs flexible connection, easy to place GPUs in more room. Comes with 7.9-inch 15Pin SATA to 6Pin molex power cable, allow users easy pick-up basic PCIE data signal power supply from GPU Miner Rigs PSU..

Check Stock

DAYLEAD Mining Rig Case 8 GPU Mining Case with Mining Motherboard Support 8 Cooling Fans(4 Preinstalled) for BTC/ETH/ZEC GPU Mining Rig (Without GPU, PSU)

【8-Port Ming Rig Frame】The mining rig frame has 8 GPU ports, which means you can install 8pcs of GPUs on the motherboard at the same time. We have also tested the rig with various GPUs to ensure that it’s compatible with a wide range of graphics cards. Please note that only the same type of GPUs can be installed at the same time..
【8 Cooling Fans Supported】The mining rig case support 8 cooling fans. It is equipped with 4*120mm Silent cooling fans and 2* fan speed controller. More quite, accelerating the air convection, excellent heat dissipation performance, keep the graphics card running at high performance. Add 1*80mm CPU cooling fan..
【A stable machine】The 8 GPU mining rig frame is made of high-quality steel, strong, durable, and available for repeated addition, Easy to set up, It’s a stable machine that’s incredibly easy to set up and requires little maintenance, making it an ideal rig for mass scaling..
【Low Consumption】The consumption of the GPU mining rig system is less than 150watt. Supports Windows10/LINUX operation system..
【Kindly Note】New version of mining case MC03 suitable for most of the mining case power supplies on the market (1U, 2U, ATX). You need to purchase and install your own PSU, Hard drive, and GPU to wo....

Check Stock

Adaptermvp Dual PSU Power Supply Extension Cable for ATX Motherboard,Full Copper 24pin Chassis Power Start line,24 pin to 24(20+4) pin,1ft/30cm

Allowing you to connect an additional PSU to your ATX motherboard.
Designed for intense Gamining and BitCoin Mining.
Material: 18AWG Length: main cable 12inches + secondary cable 12inches (30cm+30cm).
Length: 32cm/1ft.Interface: 5557 24pin (20+4) at one end, 5559 24Pin at the other end..
Both PSU will be powered up by one single motherboard. Use a second PSU to power multiple graphics cards.
NOTE: If there are pins off, you can plug back in the direction of the slot, does not affect the use!.

Check Stock

ZRM&E 24 Pin Multiple Power Supply Splitter 20+4 Pin Dual PSU Cable Mining Adapter ATX Motherboard Adapter Extension Cable 30cm

Type: 30cm 18AWG 24 Pin Multiple Dual PSU Power Supply Splitter.
Connectors: One end is 24-Pin (20+4)pin male connector, plugs into the ATX power port on the motherboard. The other two ends are 24-Pin female connectors, connect to two PSU..
Low Cost: Allows you to connect two PSU to your ATX motherboard (both 24 pin and 20 pin), and save overall hardware costs of big and expensive power supply..
More Efficient: Use the power on/off switch on your motherboard to power both power supply units simultaneously to run on a single motherboard..
Applications: Great for 6+ GPU mining rigs that need extra power, applied to intense Gaming, BitCoin, Ethereum, Zcash, Litecoin..

Check Stock

SOONTECH Complete Mining Rig System for Ethereum Coin with Windows 10 Mining Motherboard Including CPU,SSD RAM,PSU Open-Pit Mining Machine,Frame Mining Machine EXCLUDING GPU/1 Layer Mining RIG

OUR FRAME MINING MACHINE DOES NOT CONTAIN GPU.This rack-mounted miner is made of the highest quality iron material and is durable. Fully protect your....
B85 frame type mining machine, professional design, accelerate air convection, super heat dissipation design. Sufficient space is reserved between the....
Please note: This product does not include GPU, install win10 mining system (The system is not activated), including 1800W, with power cord (both 110V....
B85 frame type mining machine, including: motherboard, Intel CPU 1840/1820 (with CPU cooler), 128GB SSD, 4G RAM,PSU,win10 system（The system is not....
GPU Port Gap: the port gap between GPUs is 65mm, you can put 8pcs GPUs on the motherboard at the same time if your GPU thickness is less than 60mm,....

Check Stock

Mining Rig Case 8 GPU Mining Case with 8 Powerful Cooling Fans and Mining Motherboard (Without GPU, PSU) for ETH/ZEC GPU Mining Rig Cryptocurrency System Machine

【8-Port Ming Rig Frame】The mining rig frame has 8 GPU ports,and the GPU interface spacing is about 70mm. You can install 8pcs of GPUs on the motherboard at the same time. It’s compatible with a wide range of graphics cards..
【8 Powerful Cooling Fans】The mining rig case include 8 powerful cooling fans. More quite, accelerating the air convection,the design of one air volume in and one out with more space keep the graphics card running at high performance..
【Safe and Effective】The low power consumption, reduce heat generation, energy-saving, and safe use. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc..
【Mining rig case Including】 motherboard, CPU, power switch line, 4G RAM, 3000 rpm cooling fan * 4, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package..
【Tips】The GPU miner machine system doesn't come with GPU or PSU. You need to install your own power supply Hard drive, and GPU to work normally. Please feel free to contact us if you have any questions..

Check Stock

Mining Rig Frame - 12 GPU Steel Open Air Miner Mining Computer Frame Rig Case for Crypto Coin Currency Bit Coin ETH ETC ZEC Mining Accessories Tools - Frame Only Fans & GPU is not Included

▶▶▶【Slot】12 GPU slots. (GPU is not included). 12 card spacing is 61MM. The length of the graphics card is unlimited..
▶▶▶【Easy to install】Easy to install and strong structure. Keep all cables clean and organized, along with everything in your mining machine..
▶▶▶【High Quality Material】The open air mining frame case made up of the highest quality stainless steel material, strong, durable and....
▶▶▶【Perfect Design】Professional design for mining rig frame, accelerating the air convection, super cooling design for heat dissipation.....
▶▶▶【Note】The Frame Only, Not includes Fans or other CPU, GPU, PSU, Motherboards, Cables. If you are not 100% satistifed with this Miner,....

Check Stock

8 GPU Mining Rig Frame with Mining Motherboard/SSD/RAM/CPU/Cooling 4 Fans ,Crypto Ethereum Mining Rig Case 8 GPU Slots for Cryptocurrency Bitcoin/Crypto ETH Miner (Without GPU and PSU)

【Mining Rig Frame 】:It is specially designed for cryptocurrency mining (Monero/Ethereum/Ripple/Zerocoin/other)，with 8 GPU slots (but without GPU), has 4 USB ports and 1 VGA ports.Support single power supply(Two cables of the power supply are connected to the motherboard, and the remaining eight cables are connected to the GPU. The power supply can directly supply power to the GPU, and there is no need to supply power to the GPU from the motherboard. ).
【8 GPU -16X Slots】: 8* Pcie 3.0 slots on mining motherboard.The spacing between each GPU slot is 65mm (about 2.56in)，gives the GPU enough space for air circulation and prevents the GPU from overheating.The size of case fits most video cards.(Except 3060,because 3060 GPU need dedicated motherboard)..
【Upgrade Material】：Our mining GPU frame case is made of high-quality steel, the surface is flat and smooth, and the internal space is large. The internal motherboard design is great, the overall size of the chassis is 27.55in*15.75in*6.69in..
【ETH Mining rig case Including】:motherboard, Intel CPU (with CPU cooling plate*1), power cord, 128GB mSATA SSD, 4G DDR 3, 5200 rpm cooling fan * 4, 8*(6+2)Pin graphics power cable (motherboard and fan power,all cables are 12V),screws*12, power switch....

Check Stock