ReviewsPtfe Machine

uxcell PTFE Ball, 19mm Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 5pcs

PTFE Ball: 19mm/0.75-inch Diameter Polytetrafluoroethylene Balls..
PTFE resists most chemicals, typically withstands high temperatures, and has a low-friction, nonstick surface.
For column packing and as mixing beads, PTFE Balls minimize bumping in boiling of corrosive reagents..
PTFE generally withstands higher temperatures than other fluoropolymers, such as FEP and ETFE.
Inert to most liquids and vapors, and usable to 550F..

PTFE Ball: 25mm/0.98-inch Diameter Polytetrafluoroethylene Balls..
PTFE resists most chemicals, typically withstands high temperatures, and has a low-friction, nonstick surface.
For column packing and as mixing beads, PTFE Balls minimize bumping in boiling of corrosive reagents..
PTFE generally withstands higher temperatures than other fluoropolymers, such as FEP and ETFE.
Inert to most liquids and vapors, and usable to 550F..

PTFE Ball: 15mm/0.59-inch Diameter Polytetrafluoroethylene Balls..
PTFE resists most chemicals, typically withstands high temperatures, and has a low-friction, nonstick surface.
For column packing and as mixing beads, PTFE Balls minimize bumping in boiling of corrosive reagents..
PTFE generally withstands higher temperatures than other fluoropolymers, such as FEP and ETFE.
Inert to most liquids and vapors, and usable to 550F..

Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead....
Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS,....
Upgraded Pneumatic Fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer....
One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
1 Meter in length PTFE tubing. F1RST LAYER is an authorized distributor of Creality and Capricorn 3D Printing products. Please contact us directly for....

PTFE Lab Stirrer Bearing Adapter is used for fixing electric stirring rods in a flask to stir a liquid or solution in the biology and chemistry field, research laboratory applications, etc..
In the package of: 1 x PTFE Lab Stirrer Bearing Adapter.
Made of PTFE material, corrosion-resistant and has good resistance to high temperature(temperature tolerance range:-180 °C~250 °C), smooth surface, easy to clean..
It is detachable, comes with a sealing o-ring for good sealing performance. Easy to use, usually used with double-paddle PTFE electric stirring rod..
Please check if this size is what you need..

PTFE Lab Stirrer Bearing Adapter is used for fixing electric stirring rods in a flask to stir a liquid or solution in the biology and chemistry field, research laboratory applications, etc..
In the package of: 1 x PTFE Lab Stirrer Bearing Adapter.
Made of PTFE material, corrosion-resistant and has good resistance to high temperature(temperature tolerance range:-180 °C~250 °C), smooth surface, easy to clean..
It is detachable, comes with a sealing o-ring for good sealing performance. Easy to use, usually used with double-paddle PTFE electric stirring rod..
Please check if this size is what you need..

1/437° Female JIC Stainless Steel Braided PTFE Hose These chemically resistant PTFE braided hoses are a necessity when dealing with harsh chemicals or solvents and high-pressure applications..
They provide a uniquely rugged, durable, and chemically resistant combination of Stainless Steel and PTFE by having an inner core of PTFE and protecting that with a braided stainless steel outer sleeve. These hoses have female JIC swivel on each end and they DO NOT require Teflon tape to create a seal | BVV 1/437 Degree Female JIC Stainless Steel Hose..

PTFE Lab Stirrer Bearing Adapter is used for fixing electric stirring rods in a flask to stir a liquid or solution in the biology and chemistry field, research laboratory applications, etc..
In the package of: 2 x PTFE Lab Stirrer Bearing Adapter.
Made of PTFE material, corrosion-resistant and has good resistance to high temperature(temperature tolerance range:-180 °C~250 °C), smooth surface, easy to clean..
It is detachable, comes with a sealing o-ring for good sealing performance. Easy to use, usually used with double-paddle PTFE electric stirring rod..
Please check if this size is what you need..

✅Hydrophobic PTFE Membrane - The PTFE needle filter material is a PTFE membrane, with the naturally hydrophobic, it with broad chemical compatibility and strong chemical stability and inertia, strong hydrophobicity..
✅Uniform Pore Size - 13mm disc diameter, 0.22μm, pore size, 100 pcs barreled packed. The PTFE Syringe Filter with uniform pore size, high porosity, and high retention efficiency..
✅ High-Quality - ISO 9001 certificated, ensuring the quality of the filter from the first inspection, mid-control inspection, patrol inspection, and warehouse inspection..
✅Non-Sterile Syringe Filters - PTFE syringe filters housing is made of premium polypropylene(PP) material with a unique threaded interface (Luer lock) design, non-sterile, no adhesive, and no contamination of the sample. It can be autoclaved and sterilized at 121°C/249.8℉ for 30 minutes..
✅Various Applications - The PTFE needle syringe filters are broadly used for infiltration of various organic solvents, as well as the filtration of strong acid and strong alkali solutions. Also, the Luer lock filter is suitable for gas filtration..

3*1 Meter Original Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate....
1* PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
6 * JP4-01 and 6 * KJH 04-M6 bowden tube fitting to secure PTFE in extruder and hotend..
Easy to Install: the pneumatic fittings are PC4-M6 and the hotend fittings are PC4-M10, the upper part can be inserted outer diameter 4mm PTFE tube....
Compatibility: fit for 3D Printer 1.75mm Filament and other devices..

Yeipower has found that customers using FSH homogenizers. PTFE Sleeves are not used enough..
Homogenizer working head because of long time use. The PTFE Sleeves fittings in the working head need to be replaced continuously..
PTFE Sleeves fit all the accessories in the working heads of the FSH series homogenizers..
The product includes 10 PTFE Sleeves. 5 sleeves for each of the 2 types of working heads..
Please contact me in the first instance if you have any questions about use. We will give you a satisfactory reply..