ReviewsPtfe Material

New All Balls Fuel Pump Module 47-1029 Compatible With/Replacement For Can-Am Outlander DPS 450 EFI, Outlander DPS 570 EFI 2016-2020, Outlander L 450 EFI 2015-2016, Outlander L 500 EFI 2015

➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications..
➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃)..
➰SIZE- length=20 feet. Inner diameter=0.51 inches (12.95 mm). Outer diameter=0.63 inches (16 mm)..
➰MATERIAL- Inner layer: PTFE (Teflon) rubber.
middle layer: 304 stainless steel wire mesh sleeve.
outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure..
➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..

Check Stock

Bluedrop PTFE Open Mesh Crispy Baking Mats Quick Oven Liners Dehydrator Sheets Non Stick Perforated Toaster Meshes Pack of 2

NOT METAL MATERIAL | NEED PUT ON RACK ON PAN TO USE | NOT FOR OPEN FIRE.
FOOD SAFETY -Fiberglass coated food grade PTFE on both sides | REUSABLE-Over 1000 Service times under promptly application |NON STICK FOREVER-Never stick because of PTFE performance | EASY TO CLEAN-Rinse with clean water,Clean is a snap.
Versatile Application for Toaster Bread,Hotdog,Hamburger, Chips ,Steak, Fish, Shrimp, Prawns, Vegetable, Tomatoes, Pizzas and More Food,Dehydrator Sheets for Fruits or Flowers.
Pack of 2 PCS BlackToaster Meshes | Poly Bag Packing | Size 35X35CM(About 14″ x 14″) | Mesh Holes Size 4X4MM.
PTFE Coated Fiberglass | FDA&EU Food Grade |Temperature -40 to 260 °C | Both Fit For BBQ Grill and Oven or Dehydrator Sheets.

Check Stock

Bluedrop Toaster Baskets Non Stick PTFE Grill Mesh Trays Crisper Bakery Baskets Food Grade Woven Glass Baking Mesh Trays 27X27CM

Pack of 1 PCS With OPP Bag Each | Black Color |Size 27X27CM(10.6″X10.6″) Height 2.5CM(1″) |Mesh Holes Size 4X4MM.
PTFE Coated Fiberglass | FDA&EU Food Grade |Temperature -40 to 260 °C.
Versatile Application for Toaster Bread,Hotdog,Hamburger, Chips ,Steak, Fish, Shrimp, Prawns, Vegetable, Tomatoes, Pizzas and More Food.
FOOD SAFETY -Fiberglass coated food grade PTFE on both sides | REUSABLE-Over 1000 Service times under promptly application |NON STICK FOREVER-Never stick because of PTFE performance | EASY TO CLEAN-Rinse with clean water,Clean is a snap.
NOT METAL MATERIAL NEED PUT ON RACK ON PAN TO USE.

Check Stock

SINTLY 8AN 90 Degree PTFE Hose End AN8 for PTFE E85 Fuel Line Fitting Adapter Blue&Red 2 PCS

【Tips】8AN PTFE hose end can be work with PTFE fuel line ONLY.It can NOT be installed on braided CPE fuel line..
【Size】Thread Size of 8AN PTFE Fitting 90 Degree is 3/4-16UNF and the PTFE fuel line which works with should be 1/2"..
【Included】2 PCS x PTFE 8AN Fitting 90 Degree.
【Attention】100% product quality assurance. Please feel free to contact us, if you are dissatisfied with the product you received or have quality problems..
SINTLY Provide plently kind of fuel fittings, swivel, push-on lock, PTFE hose end and other fitting adapters..

Check Stock

Creality Upgrade 3D Printer Kit with Capricorn Premium XS Bowden Tubing 1M， PTFE Teflon Tube Cutter, Pneumatic Fittings and MK8 Socks and Extra Nozzles for Ender 3/3 Pro/5/Vyper/Voxelab Aquila

1*1 Meter Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills..
1* PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting..
2 * PC4-M6 and PC4-M10 Pneumatic Fitting to secure PTFE in extruder and hotend..
2 * MK8 hotend socks are also provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and more consistency..
2*0.4mm nozzles of non-stick silicone material Help to keep the hotend temperature extremely stable.【Note】If have any using problem. Please kindly contact us(seller) via “ask a question” find us directly, cause our customer service will respond to you within 24 hours..

Check Stock

Simsii Syringe Filter Hydrophobic PTFE Membrane Disc Diameter 25 mm Micron Pore Size 0.22 um Pack of 100

Housing: Polypropylene(PP) housing with light red ring.
Hydrophobic Syringe Filters, PTFE Membrane, 25mm.

Check Stock

Rabid Shemale Rape Squad

Teflon tape has a sealing function to prevent the leakage of water or gas..
Each roll of teflon tape has a width of 1/2 inch and a length of 520 inches, which can be used multiple times..
Teflon tape is a necessity for plumbers, when you use any threaded pipes and you hope they will not leak water or gas, and plumbing tape has good performance,tephlon tape is widely used in home and office..
This tape is made of PTFE material, which has high sealing and durability..
You will get 4 rolls of ptfe tape in one package..

Check Stock

Bluedrop Baking Sheets | Oven Liners & Crisper Toaster Mesh 1 Pcs Each | Crispy Sheets PTFE Baking Liners For Pizza Non Stick Pads

NOT METAL MATERIAL NEED PUT ON RACK ON PAN TO USE | AVOID DIRECT CONTACT WITH FLAMES | SHEETS CAN NOT RESIST OPEN FIRE.
FOOD SAFETY -Fiberglass coated food grade PTFE on both sides | REUSABLE-Over 1000 Service times under promptly application |NON STICK FOREVER-Never stick because of PTFE performance | EASY TO CLEAN-Rinse with clean water,Clean is a snap.
PTFE Coated Fiberglass | FDA&EU Food Grade |Temperature -40 to 260 °C | Both Fit For Toaster Oven or Dehydrator Sheets.
Versatile Application for Toaster Bread,Hotdog,Hamburger, Chips ,Steak, Fish, Shrimp, Prawns, Vegetable, Tomatoes, Pizzas and More Food.
Pack of 1 PCS Black Toaster Mesh and 1 PCS Brown Oven Liner Each (Total 2 PCS)| Poly Bag Packing | Size 30x40CM(11-4/5″ x 15-3/4″) | Mesh Holes Size 4X4MM Oven Liner Thickness 0.12MM.

Check Stock

Othmro PTFE Ball, 36mm/1.4\ Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 3pcs

[Features]-PTFE can resist most chemicals, usually high temperature resistance, and has a low friction, non-stick surface, excellent electrical insulation properties, non-flammable, low water absorption..
[Function]-Used for chromatographic column packing and mixing beads, PTFE balls can reduce the bumps when corrosive reagents boil..
[Advantages]-Compared with other fluoropolymers (such as FEP and ETFE), PTFE can usually withstand higher temperatures..
[Temperature Resistance]-PTFE is inert to most liquids and vapors, and can be used from -100 degrees Fahrenheit to 545 degrees Fahrenheit..
[Wide Application]-PTFE balls are widely used in chemical, machinery, electronics, ball valves, electrical appliances, aerospace and other fields..

Check Stock

10FT 6 AN 3/8\ Nylon Stainless Steel Braided PTFE E85 Tube Fuel Line Fittings Kit with 6PCS Swivel Fuel Hose Fitting Adapters

【High Quality】This hose features an PTFE inner layer which is compatible with E85, wrapped by a single layer of stainless steel and nylon. These lines do not deteriorate or swell over time due to E85 use like non-PTFE fuel line. PTFE fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided fuel line..
【Application】The fuel line is widely used in fuel system, transmission system and cooler system and can be compatible with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel, and etc..
【Package Includes】The 6an nylon and stainless steel braided PTFE fuel line kit includes: 6pcs 6an PTFE hose ends (2pcs straight, 2pcs 45 degree, 2pcs 90 degree) and 3/8 PTFE braided fuel line (Length:10ft/3M)..
【Work Condition】The 6an PTFE hose working temperature range: -76℉ to 446℉ (-60℃ to 230℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 3000 psi. Bursting Pressure (psi): 10000psi..
【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..

Check Stock

Official Creality 3D Capricorn XS Series Bowden Tube, PTFE Bowden Tube (2 Meters) with 4Pcs PC4-M6 Fittings and 4Pcs PC4-M10 Fittings for 3D Printer 1.75mm Filament

Authentic Guaranteed: The Capricorn Premium XS Bowden Tubing is enhanced with a proprietary blend of high performance additives, it is well regarded as the highest quality PTFE tubing in all of 3D printing..
Best Performance: Capricorn bowden tubing is designed specifically for 1.75mm filament with extremely precise inner & outer diameter, the filament is loaded smoothly to the hotend with as little room for error as possible between the extruder and the hotend..
Advanced Material: Capricorn PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. This Capricorn XS tubing can keep working at high temperatures up to 260℃..
Perfect Package: Package comes with two PC4-M6 fitting for extruder and two PC4-M10 fitting for hotend, one PTFE tube cutter, which can cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting..
Specifications: 2M Capricorn Bowden PTFE Tubing (1.95mm ± 0.05mm inner diameter, 4mm outer diameter). Reducing the "wiggle room" or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems..

Check Stock