ReviewsPtfe Packing With Oil

10FT 6 AN 3/8\ Nylon Stainless Steel Braided PTFE E85 Tube Fuel Line Fittings Kit with 6PCS Swivel Fuel Hose Fitting Adapters

  • 【High Quality】This hose features an PTFE inner layer which is compatible with E85, wrapped by a single layer of stainless steel and nylon. These lines do not deteriorate or swell over time due to E85 use like non-PTFE fuel line. PTFE fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided fuel line..
  • 【Application】The fuel line is widely used in fuel system, transmission system and cooler system and can be compatible with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel, and etc..
  • 【Package Includes】The 6an nylon and stainless steel braided PTFE fuel line kit includes: 6pcs 6an PTFE hose ends (2pcs straight, 2pcs 45 degree, 2pcs 90 degree) and 3/8 PTFE braided fuel line (Length:10ft/3M)..
  • 【Work Condition】The 6an PTFE hose working temperature range: -76℉ to 446℉ (-60℃ to 230℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 3000 psi. Bursting Pressure (psi): 10000psi..
  • 【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

Slick 50 Original Classic Engine Treatment with Ceramic Cerflon PTFE, SL-750017, 32 fl. oz, 1 Pack, White

  • Protects against power robbing friction and heat.
  • Use every oil change for maximum effectiveness.
  • Lubricity of PTFE but with Ceramic Technology which means the best wear protection and the best thermal stability – Better than PTFE alone.
Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

  • 1.Constructed of Premium Material: The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
  • 2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
  • 3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
  • 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect ....
Check Stock

New All Balls Fuel Pump Module 47-1029 Compatible With/Replacement For Can-Am Outlander DPS 450 EFI, Outlander DPS 570 EFI 2016-2020, Outlander L 450 EFI 2015-2016, Outlander L 500 EFI 2015

  • ➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications..
  • ➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃)..
  • ➰SIZE- length=20 feet. Inner diameter=0.51 inches (12.95 mm). Outer diameter=0.63 inches (16 mm)..
  • ➰MATERIAL- Inner layer: PTFE (Teflon) rubber.
  • middle layer: 304 stainless steel wire mesh sleeve.
  • outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure..
  • ➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..
Check Stock

Vincos 20Ft 6 an 6an AN6 Nylon and Stainless Steel Braided Oil Gas Fuel Hose Fuel Line + 10pcs 6an Hose Fitting Kit

  • Package Including: 16 Ft Silver Braided Fuel/Oil/Gas Line Kit:(10pcs 6AN hose fitting + 16Ft AN6 PTFE Oil line).
  • Universal Application: The fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas....
  • Hose Material: Inner core PTFE has excellent corrosion resistance..
  • Working Temperature: -40 F to 248 F(-40¡æ to +120¡æ) under most operating. Working Pressure:500 PSI.
  • Features: Maximized Resistance to Heat, Corrosion and Abrasion.
Check Stock

Sterling Seal & Supply, SSS165LA.187x1-V Expanded Flexible Graphite Filled PTFE Braided Packing 3/16\ Cross Section, 1' Cut Length 165LA-V.187\

  • Graphite filled ptfe (commonly called gfo) fiber with excellent thermal conductivity and chemical resistance.
  • Graphite filled ptfe fiber is excellent with thermal conductivity and will not harden.
  • Applications include corrosives, chemicals, solvents, water, steam, gases, air, ammonia, oils, liquor, paper stock, and condensate. Marine shaft packing that is ABS approved and used by the US Navy..
  • Shaft speeds to 4400 FPM, and withstands pressure up to 300 psi/20 Bar. pH 0-14 (Not for chlorine service).
Check Stock

Harvey 017065 Gas Line PTFE Thread Seal Tape

  • Yellow gas line thread seal tape with PTFE.
  • Extra heavy, full density PTFE tape especially for gas lines.
  • Recommended leakproof sealant for lines carrying natural gas, propane, butane.
  • and water, oil, and chemical installations.
  • Use on pipe, conduit, vales, bolts, anything with a thread.
Check Stock

Palmetto 1347AF Series Synthetic with PTFE & Lube Compression Packing Seal, White, 3/8\ Square, 10' Length

  • Compression packing seal protects pumps and valves from fluid leaks in general service applications.
  • PTFE-impregnated acrylic yarn resists wear and prevents corrosion from harsh chemicals.
  • Petroleum-based break-in lubricant extends packing life by reducing break-in time and frictional heat.
  • Operating temperatures range from -10 to 450 degrees F (-23 to 232 degrees C).
Check Stock

Mueller 107-825NL ProLine Full Port Heavy Duty Ball Valve 1 in FPT 600 Wog 150 Psi WSP

  • 600 PSI WOG/150 WSP (1/2" - 2") - -20-Degree to 300-Degree temperature range - Full port for maximum flow rate.
  • Packing Gland - blowout-proof stem design - PTFE seat and packing - Chrome-plated brass ball and stem.
  • Rust-resistant heavy-duty handle with vinyl grip - CSA Certified to ASME B16.33 (5G) - CSA Certified to ASME B16.44 (125G).
  • FM Approved - Fire Protection - Threaded ends comply with ANSI B1.20.1.
  • IAPMO Listed to cUPC - Certified to NSF 61-G - "Lead-Free" Compliant.
Check Stock

CSFMC Teflon Furniture Sliders Pads(24 Pack 3/4 inch(19mm) Base),Table/Chair/Cabinet/Sofa Small Size PTFE Glides,Stainless Steel Screw on Protect The Floor,Heavy Duty Sliding Block for Furniture

  • ✅ Wide range of applications>>>>>3/4 inch(19mm)Base diameter.Suitable for table,chair,cabinet,sofa,wardrobe, etc.Note: There should be no sand or metal debris on the ground, which will damage the PTFE layer..
  • ✅ Protect your floor>>>>>Bottom of 5.5 mm thick, protect your solid wood, tile floor and carpet, etc…Clever design, Stainless steel screw on installation, no rust.with a metal gasket embedded in the middle to prevent it from falling off..
  • ✅ Quality assurance>>>>>CSFMC is a professional manufacturer of PTFE (Teflon) furniture slides.When you feel that the product is not your ideal, we unconditional return refund guarantees.Your satisfaction is our pleasure..
  • ✅ Packing specification >>>>>You’ll get 24 pcs furniture slide pads. Now you can move your furniture around easily and quietly without hurting the floor..
  • ✅ Let the furniture slide easily and quietly >>>>>Bottom contains special formulated PTFE(Teflon) material.Let the furniture slide like magic and wear well..
Check Stock

WD-40 Multi-Use Product - Multi-Purpose Lubricant Aerosol Spray - Industrial Size 16 oz. (1 Pack)

  • CRC INDUSTRIES: A market leader that offers impeccably designed chemical solutions to maintain, protect and repair different marine, heavy-duty motor vehicles, industrial-grade engines, household tools and electrical equipment.
  • PTFE LUBE: This CRC dry lube creates a dry film around most metal, wood, rubber, and glass surfaces to reduce friction and resist oil, dust, dirt, and harmful contaminant build-ups..
  • ADVANCED FORMULA: With advanced dry-film lubricant technology by DuPont, this PTFE lubricant works efficiently in extreme temperature conditions, ranging between -40 to 450 degrees F. It offers an ultra-low coefficient of abrasion and friction..
  • APPLICATIONS: This lubricant bonds to and penetrates different surfaces and works efficiently on locks, pulleys, conveyors, coin mechanisms, window guides, control buttons, electrical wires, and harnesses..
  • PRODUCT DESCRIPTION: CRC Dry PTFE lubricant is available in a 10 wt. oz aerosol can..
Check Stock