ReviewsPtfe Polyimide Tape

Gizmo Dorks Kapton Tape (Polyimide) for 3D Printer Build Plate, 10 x 10 inches, 10 Sheets per Pack

  • Superior quality Kapton polyimide tape for 3D printing.
  • Resistant to high temperatures making it perfect for plastic filaments requiring heated build beds such as ABS.
  • 3D prints adhere very well especially under high heat but release cleanly when cooled.
  • Great durability for multiple print cycles without needing to change the tape.
  • Dimensions of 10 x 10 inches, can be cut to size easily with an easy to peel backing.
Check Stock

HANMCE Rubber Sealing Tape Waterproof Tape White, 4in × 5ft (W×L), Outdoor Waterproof Leak Proof Repair Tape for Pools,Sink and Various Pipelines

  • You Will Get: there are 20 rolls of PTFE tapes in blue, with the size of 1/2 inch x 59 feet, sufficient quantity can meet your using and replacement needs.
  • Reliable Material: the plumbing tape is made of PTFE material, which is safe and reliable, high temperature and corrosive resistant, with strong anti aging ability.
  • The tape has good toughness, strong ductility, not easy to break, ensuring the sealing connection is more reliable.
  • Wide Usages: the PTFE thread tape is suitable for most plastic and metal pipe, fitting for both hot and cold water pipe, applied to isolate air and water, forming a tightly seal between the threaded pipes and parts.
  • Convenient to Use: the thread seal tapes are convenient to use.
  • Just clean the 2 threaded connections that need to be sealed.
  • Then wrap the end of the tape around the inner screw joint in the same direction as the rotation direction of the 2 joints.
  • And screw the external thread connector to the internal thread connector wrapped with tape and tighten.
  • Warm Reminders: recommended wrapping the pipe seal tape according to the threading direction, otherwise, it will affect the sealing performance.
  • If the thread sealing is not good, you can increase the thickness of the tape.
Check Stock

FEPITO 6 Rolls Heat Tape for Heat Press Resistant Temperature Polyimide Tape,Ideal Solution for Heat Transfer,Sublimation,Heat Vinyl Press,3D Printing Electronics,Soldering,Circuit Board and More

  • EXCELLENT THERMAL DURABILITY:Heat resistant tape is a polyester film tape with a high temperature resistant adhesive,and the long-term temperature is -73°C (-99°F) to 260°C(500°F),the short temperature is 662 ℉(350℃)..
  • GOOD COMPREHENSIVE PROPERTIES:Not easy to break while peeling,and the tape also offers excellent resistance to moisture, acids,and chemicals.Works well in Heat press,3D Printing, Soldering, T shirt application or other Thermal transfer printing..
  • LEAVES NO RESIDUES:Our heat resistant tape for heat press offers excellent resistance to no residue after peeling off. Even uneven surfaces can be easily wrapped with heat resistant craft tape..
  • WIDELY USE:The polyimide tape has excellent electrical properties, the breakdown voltage is above 4500V.The width of the tape is 2/5.
Check Stock

Butyl Tape Tile Shower Repair Tape, Fiberglass Porcelain Ceramic Repair Crack Holes, Scratches and Dents, Wall and Tile Waterproof Tape (2inx 16.4Feet)

  • Teflon tape has a sealing function to prevent the leakage of water or gas..
  • Each roll of teflon tape has a width of 1/2 inch and a length of 520 inches, which can be used multiple times..
  • Teflon tape is a necessity for plumbers, when you use any threaded pipes and you hope they will not leak water or gas, and plumbing tape has good performance,tephlon tape is widely used in home and office..
  • This tape is made of PTFE material, which has high sealing and durability..
  • You will get 4 rolls of ptfe tape in one package..
Check Stock

Harvey 017065 Gas Line PTFE Thread Seal Tape

  • Yellow gas line thread seal tape with PTFE.
  • Extra heavy, full density PTFE tape especially for gas lines.
  • Recommended leakproof sealant for lines carrying natural gas, propane, butane.
  • and water, oil, and chemical installations.
  • Use on pipe, conduit, vales, bolts, anything with a thread.
Check Stock

generic 30 Pcs Tape Water Proof Tape Floor Tape Thread Tape Window Repair Strip DIY Cloth Tape Floor Sealing Strip Ptfe Pipe Sealant Tape Thread Seal Tape Sealant Tapes Pipeline

  • Weather Resistant Duct Tape: Plumbing tape also has a good perfermance towards moisture and acids, they will not easily..
  • Tape: Thread seal tapes are made of PTFE which has a good sealing capabiity and can resistant ..
  • Pipe Thread Tape: Thread seal tapes are made of PTFE which has a good sealing capabiity and can resistant ..
  • Heavy Duty Duct Tape: As it is not sticky, so it is also easy fro you to remove them..
  • Gas Tape: Thread sealant tape is suitable for most kinds of water pipes, creating airtight seals between threaded pipes and fittings..
Check Stock

Suburban Mfg # 6259Apw 10Gal Suburban Door Polar

  • Useful RV water heater tool kit, contains 1 wrench, 4 drain plugs and 1 PTFE tape..
  • Special angled design wrench, helps you reach tight places and rotate drain plugs. Suitable for 15/16 inch and 7/8 inch..
  • 1/2” NPT water heater drain plugs fit for most RV water heater..
  • Wrench prongs for rusted drain valves and petcock drains..
Check Stock

APT, 1 mil Thick Polyimide Adhesive Tape, HighTemperature and Heat Tape, for Masking, Soldering, Electrical, 3D Printer Application. (2\x 36 yds)

  • 【Wide Area of Applications】-Used for electronic products, soldering, circuit boards, manufacturing, fiber optics cable, insulating circuit boards, ground barrier & insulation for coils, 3D printing, high temperature sublimation powder coating, etc..
  • 【High Temperature】- APT Polyimide tape has highly excellent heat & solvent resistance. Minimal shrinkage after baking and clean removal, and also shows the great electrical insulation. It maintain high-temperature resistance as high as 400F (260℃)..
  • 【Clean Removal, No Residue】- Our high temperature tape can withstand up to 400F (260℃) degrees. Remove cleanly, leaves no residue..
  • 【No Shrinking, Curling, Or Lifter Edges】- Made with high temperature silicone adhesive and premium film. Our tape resists curling, shrinking, and lifted edges every time..
  • 【Trusted Every Where】- Our tape do not contain any harmful chemicals, and complies with RoHs & Reach requirements. It is rigorously tested and meets American Society for Testing and Materials D-5213 standard, for high performance every time..
Check Stock

Heat Tape for Heat Press, 6 Packs Selizo Heat Transfer Tape Heat Resistant High Temperature Tape for Sublimation on Coffee Mugs, HTV Craft on T-Shirt Fabrics

  • High Temp Tape - Selizo heat tape is compatible in a wide temperature range of up to 280°C (536°F), with the ability to maintain its unique combination of mechanical properties under the harshest of conditions, the high heat tape is great for applications where extremes of heat and vibration.
  • EXCELLENT ADHESION - The heat transfer tape made from polyimide film with silicone adhesive, it is easy to stick and not easy to break while peeling. Works well in coffee mug press, Heat press, T shirt application or other Thermal transfer printing.
  • LEAVES NO RESIDUES – Our heat resistant tape for heat press offers excellent resistance to no residue after peeling off. Even uneven surfaces can be easily wrapped with heat resistant craft tape.
  • APPROPRIATE SIZE - The heat resistant tape is 2/5 inches in width and 108 ft in length per roll. Not too wide nor too narrow. Long enough heat press tape can meet daily needs in different situations, such as keep your design in place when you making shirts and hats heat resist tape.
  • WIDELY USE - Heat tape for heat press is not only suitable for sublimation on coffee cups, but also ideal for heat transfer vinyl on T-shirts, pillows, clothing, fabrics. Great craft heat tape for all kinds of DIY projects.
Check Stock

Heat Resistant Sublimation Tape,Heat Vinyl Press Tape for Heat Transfer,High Temperature Tape for Soldering,Electronics Masking,Protecting Circuit Board Multi,Heat Resist Up to 482℉(24mm x 98ft x 2)

  • Material:Heat resistant tape is a Polyimide Polymers Film tape with silicone adhesive and high temperature resistant adhesive.It's really indispensable when sublimating and the tape can do the job smoothly..
  • Maximum heat resistance: 482 ℉ (250℃),comes off clean,easy peal and no residue.Works well in protecting electronic products, electric motor, solder, painting, packing fixing, printing PCB board.
  • Package included:High temp tape comes with 3 different size that is fit for your masking, soldering, electronic repair .The width of the tape in variety width, 4.7 Inch(4 rolls ),7 Inch (3 rolls )and 9.4 Inch(2 rolls ).it is 30 meters (98 feet) long..
  • Transfer tape for vinyl.This heat transfer tape keep your design in place when you making shirts and hats,help to do heat transfer vinyl on a heat press..
  • Easy use: Superior performance of the heat resistant. Strong silicone adhesive is easy to stick and no residue after peeling off..
Check Stock

4 Rolls 1/2 Inch(W) X 520 Inches(L) Teflon Tape,for Plumbers Tape,PTFE Tape,Sealing Tape,Plumbing Tape,Sealant Tape,Thread Seal Tape,Plumber Tape for Shower Head,Water Pipe Sealing Tape,White

  • Teflon tape has a sealing function to prevent the leakage of water or gas..
  • Each roll of teflon tape has a width of 1/2 inch and a length of 520 inches, which can be used multiple times..
  • Teflon tape is a necessity for plumbers, when you use any threaded pipes and you hope they will not leak water or gas, and plumbing tape has good performance,tephlon tape is widely used in home and office..
  • This tape is made of PTFE material, which has high sealing and durability..
  • You will get 4 rolls of ptfe tape in one package..
Check Stock