ReviewsPtfe Sealants

Boat Bling Hot Sauce Premium Hard Water Spot Remover w/High-Gloss Wax Sealants, 32 oz.

Ultimate hard water spot remover with high gloss wax sealants.
Bio-degradable, safe, soft-water based detailer.
Removes hard water spots, scum line, and exhaust residue.
Will NOT strip your current wax, adds additional wax sealants with each use.
Perfect for autos, watercraft, RV's, campers, motorcycles, ATVs, and more.

Check Stock

Othmro PTFE Ball, 36mm/1.4\ Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 3pcs

[Features]-PTFE can resist most chemicals, usually high temperature resistance, and has a low friction, non-stick surface, excellent electrical insulation properties, non-flammable, low water absorption..
[Function]-Used for chromatographic column packing and mixing beads, PTFE balls can reduce the bumps when corrosive reagents boil..
[Advantages]-Compared with other fluoropolymers (such as FEP and ETFE), PTFE can usually withstand higher temperatures..
[Temperature Resistance]-PTFE is inert to most liquids and vapors, and can be used from -100 degrees Fahrenheit to 545 degrees Fahrenheit..
[Wide Application]-PTFE balls are widely used in chemical, machinery, electronics, ball valves, electrical appliances, aerospace and other fields..

Check Stock

10FT 6 AN 3/8\ Nylon Stainless Steel Braided PTFE E85 Tube Fuel Line Fittings Kit with 6PCS Swivel Fuel Hose Fitting Adapters

【High Quality】This hose features an PTFE inner layer which is compatible with E85, wrapped by a single layer of stainless steel and nylon. These lines do not deteriorate or swell over time due to E85 use like non-PTFE fuel line. PTFE fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided fuel line..
【Application】The fuel line is widely used in fuel system, transmission system and cooler system and can be compatible with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel, and etc..
【Package Includes】The 6an nylon and stainless steel braided PTFE fuel line kit includes: 6pcs 6an PTFE hose ends (2pcs straight, 2pcs 45 degree, 2pcs 90 degree) and 3/8 PTFE braided fuel line (Length:10ft/3M)..
【Work Condition】The 6an PTFE hose working temperature range: -76℉ to 446℉ (-60℃ to 230℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 3000 psi. Bursting Pressure (psi): 10000psi..
【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..

Check Stock

TCP Global 8" Black Extra Fine Foam Finishing Grip Pad Final Buff Polish Wax - Hook & Loop

Our Professional 8" Black Final Finishing Pad Is Our Lightest Ultra Soft Polishing Foam For Applying All Final Finish Waxes, Paint Sealants and Polishing Products..
Designed To Have No Cut and Will Apply Thin, Even Coats of Waxes, Paint Sealants and Car Glazes..
8" Foam Da Polish Pads Contain A Grip Attachment and Have Curved Reinforced Plastic Backing.
Foam Pads Made with Durable Open Cell Foam Which Improves Airflow.

Check Stock

Jescar Power Lock Polymer Paint Sealant 16 oz

3-IN-1 FORMULA REPLACeS WAXES, POLISHES AND SEALANTS - Ethos Ceramic Wax makes protecting your car, boat, RV or Motorcycle EASY! This quick, instant....
100% SATISFACTION GUARANTEED - One application ceramic wax has been proven to last 10X longer than traditional carnauba waxes or polymer sealants.....
LONG LASTING RESULTS - Once applied to your paint, glass or chrome ceramic car wax cures to completely seal and protect the surface from the elements.....
NON-STICK, MIRROR-SHINE FINISH - This new formula produces a deep, vibrant shine that makes any car look like a show car. Once applied, ceramic wax....
AEROSPACE GRADE SEALANT - Our PATENTED Teflon Resins were trusted by NASA to protect the delicate finishes of the Space Shuttle from weathering. This....

Check Stock

ADVANGENE Syringe Filter Sterile, PES, 0.22um, 13mm (75/pk)

HYDROPHOBIC PTFE SYRINGE FILTERS - Virgin PP housing with Hydrophobic PTFE membrane. Diameter: 13mm, Pore Size: 0.22μm, 100Pcs..
UNIFORM PORE SIZE - PTFE Syringe Filter with uniform pore size, high porosity, and high retention efficiency..
PREMIUM PERFERMANCE - It Can be autoclave, sterilize at 121°C/249.8℉ for 45 minutes, it with broad chemical compatibility and strong chemical stability and inertia..
STURDY & DRUABLE - The syringe filters fit well, securely and durable, have reasonable flow for the filtration size, PTFE syringe filters are wall marked, when working with different requirements for filtration to be able to quickly discern which ones are being used..
APPLICATION WIDELY - PTFE Syringe filters are broadly used infiltration of various organic solvents, as well as the filtration of strong acid and strong alkali solutions, perfect for hydrophobic, even such as culture medium, liquid cultures and grain spawn jars..

Check Stock

Motsenbocker’s Lift Off 41116 16-Ounce Silicone Latex Caulk and Foam Sealant Remover Spray is Safe on Showers, Construction Adhesives, Stainless Steel, Ceramic Water-Based and Biodegradable , White

CAULK REMOVAL MADE EASY: Lift Off Caulk Remover uses a patented, water-based formula that is biodegradable to safely remove sealants, expansion foams, silicone caulks, construction adhesives and two-part epoxies..
FAST AND SIMPLE TO USE: This caulk remover is fast acting requiring a simple spray, wait, scrape and wipe clean process to remove sealants, foams and more without damaging the surface..
WORKS ON MULTIPLE SURFACES: Multi-surface friendly and works safely on your tub and shower enclosures, vinyl flooring, baseboards, tile, porcelain, steel, cast iron, wood, granite, marble, ceramic, stone, and more..
EASY REMOVAL OF CAULK IN PIECES: Rather than dissolving, Lift off works its way between the sealant and surface to break the molecular bond allowing caulk to be removed in pieces..
MADE IN THE USA: Not only are Lift Off products made in the USA, they are safer, eco-friendly, and simply work better..
Includes one 16-ounce trigger spray bottle.
Safe for Use on Porcelain, Steel, or Cast Iron Tubs and Showers.
Will NOT Dissolve Sealants, Breaks Bonds Allowing them to be Removed in Pieces.
Offers a Biodegradable, Water Based, Low VOC Formula.

Check Stock

uxcell PTFE Ball, 22mm Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 5pcs

PTFE Ball: 22mm/0.87-inch Diameter Polytetrafluoroethylene Balls..
PTFE resists most chemicals, typically withstands high temperatures, and has a low-friction, nonstick surface.
For column packing and as mixing beads, PTFE Balls minimize bumping in boiling of corrosive reagents..
PTFE generally withstands higher temperatures than other fluoropolymers, such as FEP and ETFE.
Inert to most liquids and vapors, and usable to 550F..

Check Stock

uxcell PTFE Ball, 36mm Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 3pcs

PTFE Ball: 36mm/1.42-inch Diameter Polytetrafluoroethylene Balls..
PTFE resists most chemicals, typically withstands high temperatures, and has a low-friction, nonstick surface.
For column packing and as mixing beads, PTFE Balls minimize bumping in boiling of corrosive reagents..
PTFE generally withstands higher temperatures than other fluoropolymers, such as FEP and ETFE.
Inert to most liquids and vapors, and usable to 550F..

Check Stock

uxcell PTFE Ball, 19mm Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 5pcs

PTFE Ball: 19mm/0.75-inch Diameter Polytetrafluoroethylene Balls..
PTFE resists most chemicals, typically withstands high temperatures, and has a low-friction, nonstick surface.
For column packing and as mixing beads, PTFE Balls minimize bumping in boiling of corrosive reagents..
PTFE generally withstands higher temperatures than other fluoropolymers, such as FEP and ETFE.
Inert to most liquids and vapors, and usable to 550F..

Check Stock

uxcell PTFE Ball, 25mm Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 5pcs

PTFE Ball: 25mm/0.98-inch Diameter Polytetrafluoroethylene Balls..
PTFE resists most chemicals, typically withstands high temperatures, and has a low-friction, nonstick surface.
For column packing and as mixing beads, PTFE Balls minimize bumping in boiling of corrosive reagents..
PTFE generally withstands higher temperatures than other fluoropolymers, such as FEP and ETFE.
Inert to most liquids and vapors, and usable to 550F..

Check Stock